I am replacing the front brake pads on a Suzuki SX4 awe.
Пікірлер: 55
@thedallas0911 жыл бұрын
My local mechanic wanted $200 dollars to change the brake pads on my SX4. I followed your video and did it for way less. Thanks a lot and keep posting!!!
@barbaramichaels9 жыл бұрын
I used this video to replace my brake pads on my Suzuki. Thanks.
@Draacid8 жыл бұрын
Excellent video, all the different angles, and detail particularly with the brake compression really made it clear.
@volvosweden11 жыл бұрын
I am glad this helped.
@derickpearson10783 жыл бұрын
Absolutely excellent proceedures shown. Well done for making it simple.
@MrFreshchico5 жыл бұрын
2019. Thank you. This is going to help me down the road
@auxmike10 жыл бұрын
I enjoyed watching you work. You are careful not messy like shop mechanic!
@TriMoot10 жыл бұрын
PERFECT! Very clear video, and directions. A great job! Thank you!
@davidstein506210 жыл бұрын
Thank you for the video. Very clear with good camera angles. Now off to do it!!
@chrisnelson24653 жыл бұрын
Excellent video. You gave good clear concise instructions. Thank you so much !
@volvosweden11 жыл бұрын
Yes it will work for 2008
@ericsankey57564 жыл бұрын
Wow man sorry for whoever gave you thumbs down. This was exactly what I needed! Thank you!
@darrellphipps91006 жыл бұрын
Great job, Thanks !
@bjarturari55179 жыл бұрын
thank you, this helped me alot!
@danabourgeois95538 ай бұрын
So, do you have to use new clips or can you re use the existing ones? Reason for my asking is the ones i got were the wrong clip spacing. And there was only one set.
@joek95888 ай бұрын
You did good work , and lubricate the little metal but you should change it , and also need to check and lubricate the sliding pin.
@larrypopejoy95614 жыл бұрын
How do you put front brakes on a 2003 Suzuki XL7
@EDENRAIN3 Жыл бұрын
Is there any that include bleeding the brake lines? My dad always told me it should be done when you change your pads, but for the life of me i cant remember where the nozzle is/how to do it. I was always in the car going pump, pump, hold. 😂
@konstantinsemyakin96929 жыл бұрын
Отличные видео по sx4 продолжайте.
@Tao19882 жыл бұрын
thank you
@mcribs78115 жыл бұрын
Great video! Is this the same for a 2007 SX4? I already saved your rear brake video to my favorites.👍
@jbikedh10 жыл бұрын
I just used your vid to do my fiat sedici thx.
@volvosweden10 жыл бұрын
Glad it helps.
@BrunoMN11 жыл бұрын
That's copper grease?
@CriticalThinking-wl3og3 жыл бұрын
Very good sir very good
@eugencoman71989 жыл бұрын
Hello all, I would like to replace my brake pads for my Suzuki Sx4 2wd. Could you tell me what characteristics they should have (thickness, height and others)? I found on a website 3 different values for thickness (16, 16.8, 17) and I don't know which one should I order. Thanks
@volvosweden9 жыл бұрын
Just go to any auto parts or Suzuki dealer and they will help you.
@eugencoman71989 жыл бұрын
Here aren't this kind of shops. I'm living in a small country.
@gunsforum9 жыл бұрын
спасибо за видео! ))) какие-то хитрые пластиночки на колодки ставятся? У меня на "венгре" их нет и в новом комплекте колодок от Girling тоже они отсутствуют. Или это только на "японцах"? Рекомендуют цилиндр под резинкой смазать прежде чем его задвинуть, пробовали? И чем?
@smallcnclathes2 жыл бұрын
Good video. Is it my imagination or is it that here you have vented discs and in another video they are non vented?
@bunker9318 жыл бұрын
very nice tutorial and the quality is outstanding.
@VirtualLunacy8 жыл бұрын
thanks.
@stompme969 жыл бұрын
Will this video work for 2008 Suzuki Grand Vitara?
@volvosweden9 жыл бұрын
not sure.
@BrunoMN11 жыл бұрын
Friend, nice Video! I've a 2010 SX4 AWD and i've bought EBC BRAKE PADS that doesn't came with this grease... do you think i can use WD40 to do this ? Thank you!
@ghostchaser83383 жыл бұрын
No my friend, wd40 is a penetrative fluid and rust inhibitor not for brake jobs of this kind, eventually it will dry out. Use brake grease only, copper or synthetic
@apceron9611 жыл бұрын
perfect
@vardamanbundren52258 жыл бұрын
is the wear indicator on the leading or trailing edge?
@volvosweden8 жыл бұрын
It depends on brand of the brake pads.
@volvosweden11 жыл бұрын
No don't use W40. Get proper grease from your local Auto Parts Store. Its a small pouch like 2$.
@RoaldKoger11 жыл бұрын
Yes, it is.
@ginge_binge6 жыл бұрын
Can you make one with rear pad change?
@volvosweden6 жыл бұрын
There is one on my channel
@richardmullins18836 жыл бұрын
What was he doing with the g clamp?
@volvosweden6 жыл бұрын
Compressing the caliper piston so that the new thick pads would fit.
@rajup14874 жыл бұрын
Open the bleeder plug first after press the piston
@TheMisterMib10 жыл бұрын
Огромное Спасибо за видео,очень познавательно. Вопрос.Передние такой же метод замены?. to HFFFunny. Просто долей тормозуху.Автор показал где клапан.Удачи
@MikePikolon10 жыл бұрын
I paid way too much to have this work done...should have done this myself
@volvosweden10 жыл бұрын
I think my local dealer wanted 250$ including parts for this job.
@rustynutz76488 жыл бұрын
Its ALWAYS snowing in Russia
@RobsonFerreira9 жыл бұрын
Hello i'm fron Brasil end i have one SX4 it's posibilt you teke me a PN front end back side if is posibilit oders pads write too i want all 8 parts Sorry my words Robson
@user-cg9uw9ru8h4 жыл бұрын
Привет а на русском меньше просмотров ?
@richardjalbert133410 жыл бұрын
why dont you open the bleeder to evacuate old burn oil? you push back contaminated oil to master cylinder..you dont lubricate slide guide pins. lubricate under the hardware plates, between pads support and slide plates? cheap amateur jobs. sorry
@robertr93725 жыл бұрын
Can you provide a video to show the steps you mentioned?