Cleaning and rebuild the carburetors an a Suzuki VL 1500 Intruder bike. Porlasztók tisztítása, felújítása és szinkron.
Пікірлер: 25
@jules50779 ай бұрын
Man, you are saving me and my best friend, we just started rebuilding his (passed) father's 1500 and i was crawling the internet for a carb rebuilt video for this specific model. Love on you ✌✌
@latzkoworks9 ай бұрын
Thank you for watching, and have a good luck for your work on the bike!
@juanantoniocastillomartine2605 Жыл бұрын
hello, excellent video, I'm not a mechanic but I realized that the rear cylinder needs more gasoline, I have a problem my rear cylinder gets very hot, that could be the reason,
@latzkoworks Жыл бұрын
Hello, thank you, have a good luck!
@CR-os2xn2 жыл бұрын
Hi ... how many turns out on the 2 main jets. ?? Thank you and good job 😀👍
@latzkoworks2 жыл бұрын
Hello, thank you! As I remember the pilot turn out is different between the two cylinders, and it depends also on the main jet sizes. So first you should check the main jet sizes, after that assembly the carbs and adjust the pilot screws. I have downloaded the service manual, and have seen the adjusting amount in it. Be careful, the needles are also different.
@CR-os2xn2 жыл бұрын
Thank you very much. I Come from Dennark and not much People work professional anymore with carburators. I find it Hard to find Any good information about adjustment and factory settings. I have tryed to make the vl Come down in fuel, because my spark-plugs Come black at dusty. I have also syncronized the carb. I will take out my spark-plugs again for inspection. Thank you for answer C.R.👍
@latzkoworks2 жыл бұрын
@@CR-os2xn thank you for watching my video, and have good luck! I know it is hard to find a good repair guy, the situation is the same here in Hungary.
@katanemeth24012 жыл бұрын
✌💯❤
@user-wk2yy8gk8t4 ай бұрын
pls i need help how i adjust the mixture scrow ? how many turns ? and how to adust the tps ? i have avometer but how its easy to remove all the carb parts and clean and install the new but how to adjust the Screws☹☹😢😢
@latzkoworks3 ай бұрын
Hello, pilot screws: front 2 turn back, rear 2 turn back, except for code E18: front 2 1/2, rear 2 5/8 turns back.
@user-wk2yy8gk8t3 ай бұрын
@@latzkoworks 😢😢😢😢😢😢
@darkojovanoski37422 ай бұрын
What is code E18?
@latzkoworksАй бұрын
Hello, E18 means Switzerland.
@darkojovanoski3742Ай бұрын
Ok thanks @@latzkoworks
@tiborpiller23385 ай бұрын
Szia. Hány literes a ultra sonic cleanered? És melegited is?
@latzkoworks5 ай бұрын
Szia, ez a videón kb 1,5 literes, azóta vettem nagyobbat. 40 fokra melegítem mindig.
@tiborpiller23385 ай бұрын
Köszi a gyors választ. Te értesz a váltóhoz? Néha kiesik üresbe 4 és 5 váltás között. Tibi
@latzkoworks5 ай бұрын
@tiborpiller2338 a váltójavítás nagyobb meló, általában nem éri meg. Motort ki kell venni, széthúzni, stb. Brutál idő és költség.
@ceva4085 Жыл бұрын
is there any manufacturer who makes new carbs for the intruder?
@latzkoworks Жыл бұрын
Hello, I don't think, but with the renewed oem should it work.
@ceva4085 Жыл бұрын
@@latzkoworks does the oem still produce them? do you have any link?
@latzkoworks Жыл бұрын
@@ceva4085 I don't know, just call a Suzuki dealer and he'll answer it.
@soulgivesoul07 Жыл бұрын
What chemical is in your ultra sonic cleaner?
@latzkoworks Жыл бұрын
Hello, half a water-based engine cleaner fluid and half distilled water.