SV650 Phone / Ram Mount Location

Universal Phone Mount: amzn.to/3pzVERg
Short Arm: www.amazon.com...
U-Bolt Mount: amzn.to/2UAcPni
warnerdiscovers...
/ warnerdiscovers
/ warnerdiscovers
/ warnerdiscovers
Equipment used to film
-------------------------------------
Canon 50mm Lens: amzn.to/2XS5rF3
Canon T5i: amzn.to/2MmJJnj
Canon T7i (Updated version of T5i): amzn.to/3gDNmU1
GoPro Hero 4 Black: amzn.to/2ZXFjLR
GoPro Hero 8 (Updated version of Hero 4): amzn.to/36Py9KQ
Amazon Basics 60" Tripod: amzn.to/2Arak02
Rode SmartLav+ Microphone: amzn.to/2XpNqz3
SanDisk 64gb SD Card: amzn.to/3eANmSE
Hyperdrive 6 in 1 USB Adapter for iPad: amzn.to/2U1izXt
*All Amazon links are affiliate, as an Amazon Associate I earn from qualifying purchases

[@mnmmercury1094]

yes, i have this same problem. I think ill give it a shot! Update: So i ended up doing the same thing. That pillar next to the ignition housing is where the torx security screw lives. It's pretty sturdy in there. I actually used the plastic bushing that goes in between the u bolt and whatever its being bolted to. I did however trim some of the ram mount that hooks onto the u bolt with a dremel to get some additional clearance and avoid the ubolt from catching on the throttle cable when moving side to side. I think the later mounts have a bit more protruding on them. Overall its pretty secure, I think the other alternative is to get a open top steering locknut and use their mount that goes into the steering head. But this works for now.

[@WarnerDiscovers]

Hope it helps!

[@Frontysco]

Thanks! Just ordered the Stem mount and noticed it does not fit on the sv 😅. Ubolt is on its way.

[@damuscat]

Great idea! I ended up purchasing the U-Bolt and short arm but will be using Quad Lock for the phone holder. I really like the position of the phone with this setup. Just curious though, has anyone seen issue with the throttle cables just coming into contact with the end of the U-bolt on full lock to the right? It only just seems to touch and with a rubber cap over the end of the U-bolt I don't think it'll be a big problem. I might try finding a way to keep the cables from touching at all though.

[@WarnerDiscovers]

For what it's worth, I haven't had an issue since installing! But valid concern

[@jennasharma9181]

Someone finally found a way. I have it currently on the small space of the handle bar, but there's not enough room. Does it work ok? Doesn't move around too much or restrict the movement of the handlebars?

[@WarnerDiscovers]

Glad this helped! Worked fine for me, though I only took it out a couple times before it was too cold to ride. Would recommend and will be using this spring!

[@timgasperic9054]

Hey, did you have any issues with the vibrations? Kind regards

[@WarnerDiscovers]

Nothing so far, haven't had to adjust the mount since putting it on there. I don't ride super often though so YMMV

[@andrewaustman1830]

What’s the weirdly shaped rubber that sits directly behind the cradle for??

[@WarnerDiscovers]

That’s to hold the corners of your phone. Sort of a fail safe backup in case it loses friction / pressure on the clamp

[@andrewaustman1830]

Gotcha, thanks!

[@johnc.9220]

Is this using the u bolt set up that came with the RAM mount or did you have to modify it?

[@WarnerDiscovers]

No modifications here, just whatever came with the U bolt I'm pretty sure

[@rockitkid]

Has your phone had any problems with vibrations messing up the camera or anything? I keep hearing stuff about that happening

[@WarnerDiscovers]

I havent, but I would definitely take that into consideration! I don't use it everyday on there or something just once in a while.

[@gregb4144]

Is it possible to just use a fork stem mount on an sv650?

[@WarnerDiscovers]

I think so? I'm not sure though, didn't end up going down that route

[@SulacoEEV]

Bro..same bike (SVS 650 K6), same Phone/Ram mount and same location. Currently, it's worked since 1 year. Warning: adjust the Ram support properly so that the phone touches the fairing when changing direction.

[@WarnerDiscovers]

Good to hear! Thanks for the update