How to Use a Hand Tube Bender | Tech Tips | Swagelok [2020]

  Рет қаралды 1,571,042

Swagelok

Swagelok

Күн бұрын

Пікірлер: 197
@johnnee51
@johnnee51 9 жыл бұрын
These benders are the BEST, I've used them for years with complete confidence.
@vemlacduong1954
@vemlacduong1954 8 жыл бұрын
+johnnee51 Could you tell me where can I buy this . Thanks quang31.nguyen@yahoo.com
@AcidicJO
@AcidicJO 8 жыл бұрын
+quang nguyen swaglok has stores you can go to and buy them new. You can also find them on eBay.
@manop2000
@manop2000 3 жыл бұрын
I am doing AC job. and this is the incredible video. I've seen. Thank you.
@Captleemo
@Captleemo 6 жыл бұрын
If your bending a 10 or 20 foot stick of tubing and it has a lot of bends in it, it is a good idea to take a piece of tie wire and make a model that you can bend with your fingers. That will make sure you put the tubing in the bender the right way instead of bend come out upside down. We had a guy on our crew that could take out his tape measure and look up into the structure 15 or 20 feet away from where the tubing would be going, somehow get his measurements from that distance and then bend a piece of tubing haul it up into the structure to install it and it would fit like a glove. When your on a big construction site there are a lot of people that are real artists when it comes to bending tubing but I never saw anyone that could get their measurements from a distance like that.
@cerealkiller4248
@cerealkiller4248 3 жыл бұрын
I go to a site, it’s a large old Manor House and in there is a one pipe system in which the bulk of the pipework is 2” iron. The bends in there are incredible, hydraulically pulled to span curved bay windows, offsets and 90’s all in one piece. I’m known for my neatness/accuracy when bending copper, I used to use oxy/acetylene to manufacture loops/sets/bends on site, I learnt how to pull bends etc on an hydraulic bender during my apprenticeship but this work is something special and has probably been there 50 years. Every time I go there I just stare at them because I know just how special the guys were who did that work 👏👏👏 The site is empty now, I still do an annual boiler cert for the site so I may take a video next time to preserve it just in case the site gets demolished 😳
@murphyjulian7393
@murphyjulian7393 11 ай бұрын
@@cerealkiller4248sounds like Tartarians from long ago😂.
@64mikecowart
@64mikecowart 4 ай бұрын
Sounds like he used a laser. Or he got lucky 😅
@Captleemo
@Captleemo 4 жыл бұрын
Those Swagelok roller benders are definitely some nice benders especially when your bending half inch SS tubing.
@robertborunda9845
@robertborunda9845 4 жыл бұрын
So question for any who can answer this. What is the point of using the L and R markings on the block? Personally whenever I bend tubing I choose to bend tubing like conduit I use take up and deduct methods. I’ve tried doing it this way but just don’t like the outcome of the quality of work
@swagelok
@swagelok 4 жыл бұрын
Hi Robert, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@diazaa
@diazaa 4 жыл бұрын
In this video, the L indicates the 90 degree centerline mark. If you have a leg that needs to be 5" then a 90 degree bend. You could measure 5" from the end of tube, line your mark up with the L then bend 90 degrees. Thus not having to mark or calculate takeup.
@murphyjulian7393
@murphyjulian7393 11 ай бұрын
The L mark refers to an offset which was measured from left to right on the tube. The R refers to measuring your offset from right to left, also known as a reverse bend.
@josefineengholm1103
@josefineengholm1103 Жыл бұрын
I'm going to do a project and this looks like the exact type of tubing I need, but I don't know what to search. What's this type of tube called and what size?
@Srk7028
@Srk7028 3 жыл бұрын
quality product...... Is it available India ?
@swagelok
@swagelok 3 жыл бұрын
Hello, Your local sales and service center will be happy to assist with your product inquiry. Their contact information can be found here: products.swagelok.com/en/locator.
@deeeeeeps
@deeeeeeps 8 жыл бұрын
Now that looks like a quality tool!
@ericcoleman5046
@ericcoleman5046 3 жыл бұрын
Are you able to make hoop earrings using this tool? From a jeweler using silver tubing
@swagelok
@swagelok 3 жыл бұрын
Hi Eric, More information on the Swagelok hand tube bender can be found here: www.swagelok.com/downloads/webcatalogs/en/ms-13-43.pdf. Your local sales and service center will also be able to answer additional questions. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center
@Kayodethegrapher
@Kayodethegrapher 6 ай бұрын
What does the R markings stand for?
@baffoxxx2117
@baffoxxx2117 3 жыл бұрын
Good evening, is it also good for copper pipes? Thank you.
@swagelok
@swagelok 3 жыл бұрын
Hi Baffo, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@baffoxxx2117
@baffoxxx2117 3 жыл бұрын
@@swagelok Thanks
@c.wijoyolinardi
@c.wijoyolinardi 2 жыл бұрын
Good Morning,Swagelok Hi,How to much? Tools for Bender,Thank You.❤🙏🤗
@swagelok
@swagelok 2 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/en/locator
@jamessuppiah
@jamessuppiah Жыл бұрын
Hi can anyone advice, I'm trying to bend 15mm copper & still pipe. Which bender size should I use?
@mikey4016
@mikey4016 5 жыл бұрын
Where are these made (i.e. country of origin)? I looked all over your website, I even found the specifications on the tools, but I couldn't find the first specification I need to know before considering purchasing anything.
@swagelok
@swagelok 5 жыл бұрын
Hi Mikey, The country of origin for the hand tube bender is the United States. Your local sales and service center will be happy to help answer any further questions. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center
@mikey4016
@mikey4016 4 жыл бұрын
I'm glad to hear that they are made in the U.S.A., now I just wish they were more widely available, I don't have any service centers within hundreds of miles of me. You'd sell more if they were readily available online.
@swagelok
@swagelok 4 жыл бұрын
@@mikey4016 Hi Mikey - Our sales and service centers are happy to assist you with ordering. Contact information for the location nearest you can be found here: www.swagelok.com/en/locate-a-sales-service-center
@falloutforever88
@falloutforever88 2 жыл бұрын
Where can I buy them? Your catalogue doesn't seem available to the public
@swagelok
@swagelok 2 жыл бұрын
Hello, you can find more information on Swagelok tube benders, including catalogs and product information, here: products.swagelok.com/en/tubing-tube-accessories/tube-benders/c/803?clp=true. You can also purchase tube benders on our website, or you can reach out to your local Swagelok sales and service center: www.swagelok.com/en/locate-a-sales-service-center
@gplusgplus2286
@gplusgplus2286 4 жыл бұрын
I cant understand from the video how your marks help get the length right between the bends...
@swagelok
@swagelok 4 жыл бұрын
Hello, Your local sales and service center will be happy to help. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@Centrifugalsparks
@Centrifugalsparks 2 жыл бұрын
I can't find a good video that explains the take up theory and how it is applied in order to make an offset, mine are all 5/16 too big every time.
@swagelok
@swagelok 2 жыл бұрын
Hi, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/locator
@djritm3215
@djritm3215 2 жыл бұрын
There is a chart in the tube bender manual that tells you the subtractive adjustments needed for bends 30-90 degrees, anything below 30 is no adjustment needed. For example if doing a 45 degree offset each 45 bend will equal up to 90 degree total and say the pipe is 1/4 with 9/16 bend radius the total subtracted adjustment will be 5/16.
@usabadone
@usabadone 11 жыл бұрын
How do I get center to center and 22 and 45 bends
@excellrefrigeration6218
@excellrefrigeration6218 4 жыл бұрын
Thanks sir for this information I learnt good knowledge to make proper bend . I say you thank again for this informative video
@marcmollous6091
@marcmollous6091 2 жыл бұрын
i want to have a 180 degree bend in the middle, how would i measure this?
@swagelok
@swagelok 2 жыл бұрын
Hi Marc, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/locator
@카르페디엠-v7h
@카르페디엠-v7h 4 жыл бұрын
Thanks. I realized the mean of L. Please tell me the R meaning.
@swagelok
@swagelok 4 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@screamrad218
@screamrad218 8 жыл бұрын
I'm currently attending a Aviation School. Where could i purchase this tool?
@NaveenKumar-oj7xh
@NaveenKumar-oj7xh 4 жыл бұрын
At your local grocery store.
@zoomadvertising
@zoomadvertising 4 жыл бұрын
Is it possible to bend 1/2 inch aluminium tube ?
@swagelok
@swagelok 4 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@jorgecarlos6282
@jorgecarlos6282 8 жыл бұрын
is amazing! but for straighten this pipe is right this tool?
@kjmtz6606
@kjmtz6606 6 жыл бұрын
Jorge Carlos your grammar is why Donald trump is building a wall
@mikeroberts9368
@mikeroberts9368 6 жыл бұрын
@@kjmtz6606 I wonder how you do with your second language?
@Eugen1303
@Eugen1303 6 жыл бұрын
Thank you for this video. It helped me a lot today
@GoldJewellery311
@GoldJewellery311 6 жыл бұрын
Brand model number and price?
@abhishekbhatt2294
@abhishekbhatt2294 9 жыл бұрын
Can this instrument be used for polymer tube of 2.5mm for bending at different angels..?
@gangarai2508
@gangarai2508 5 жыл бұрын
Can I do it in different sizes of pipes by same by same tool?
@swagelok
@swagelok 5 жыл бұрын
Hi Ganga, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@alexakkers2859
@alexakkers2859 3 ай бұрын
Someone knows whats the R mark for?
@bhutta.512
@bhutta.512 2 жыл бұрын
Are this available in pakistan...?
@swagelok
@swagelok 2 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/en/locator.
@neilnolin823
@neilnolin823 3 жыл бұрын
So what does the L stand for on the bender?
@swagelok
@swagelok 3 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/en/locator
@Smart_fix
@Smart_fix 2 жыл бұрын
Can I use it for 15mm copper pipe in Uk?
@swagelok
@swagelok 2 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/en/locator
@rakeshsuthar7441
@rakeshsuthar7441 4 жыл бұрын
Good tips for pipe bending sir
@RahulRahul-xt8ly
@RahulRahul-xt8ly 6 жыл бұрын
Thiwari tiub ki jankari chahiye kitane parkar Ke beandar hote he 1/2 SE niche Ke kitane parkar Ke tiub hote he Sar please jankari chahiye
@jatinlohani6297
@jatinlohani6297 4 жыл бұрын
Spring bender se bend kaise de
@craig8159
@craig8159 6 жыл бұрын
I have a tube bender that bends 4 different size's and don't have to buy 4 different benders to do what 1 does. And bought it at Lowes. I use it to bend my copper for work.
@Swampy0110
@Swampy0110 6 жыл бұрын
Craig Chenault but can it bend thick wall stainless like these can?
@craig8159
@craig8159 6 жыл бұрын
Don't know never tried. I use it to bend my copper at work for freon lines.
@TexasZEOD
@TexasZEOD 6 жыл бұрын
Good for you. That has absolutely zero relevance to what this product does though. Copper is a very soft metal, while stainless steel is not. Apples and oranges.
@craig8159
@craig8159 6 жыл бұрын
Yea I know steel is not same as copper. The thing is both these benders and mine work off same principle and bend the pipe the same way . But if you want my comment to sound dumb no problem ,what ever.Was not saying tool is bad was just making a statement
@TexasZEOD
@TexasZEOD 6 жыл бұрын
Not trying to say it was dumb, you are just trying to say you bought a cheaper bender to do the same thing when you don’t know if it can bend stainless. It’s great info for plumbers, but not for what this product does and it sounded like you were talking down on these benders due to yours when you don’t even know the capability of yours to do the same thing.
@subramaniansurya9769
@subramaniansurya9769 2 жыл бұрын
How to purchase in India?
@swagelok
@swagelok 2 жыл бұрын
Hello, Your local sales and service center will be happy to assist. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center
@imc3800
@imc3800 4 жыл бұрын
I need such a tool for a 7 mm copper tube. Do you have it?
@swagelok
@swagelok 4 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@connguyen938
@connguyen938 4 жыл бұрын
can you show me , where sale bender tube guige ? thanks
@swagelok
@swagelok 4 жыл бұрын
Hi Con, We are happy to help. Please contact your local sales and service center regarding your question. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center.
@jpaulpalacios
@jpaulpalacios 8 жыл бұрын
vídeos como éste hay en español? de swagelok
@rlaerialphotography5171
@rlaerialphotography5171 6 жыл бұрын
How does his effect the inside diameter at the bend?
@MadJDMTurboBoost
@MadJDMTurboBoost 5 жыл бұрын
The idea is that the engineers designed the tube to be bent at a radius greater than or equal to the bend radius. Inner diameter is largely unaffected. It is only when the tube is bent at smaller radii that the diameter is greatly reduced and results in a visible kink.
@sheltondesilva5637
@sheltondesilva5637 8 жыл бұрын
A great video for the trade.
@jakehassett2624
@jakehassett2624 7 жыл бұрын
Is he working centre to centre or back to back?
@mdevidograndpacificlumbera1539
@mdevidograndpacificlumbera1539 5 жыл бұрын
You have anything that bends 1" stainless?
@swagelok
@swagelok 5 жыл бұрын
Hi Martin, Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@diazaa
@diazaa 5 жыл бұрын
Your not bending 1" ss with a hand bender such as these.
@jesusitovillarin4289
@jesusitovillarin4289 3 ай бұрын
Thank you sir more info
@abusyed8674
@abusyed8674 3 жыл бұрын
Need. 25" to 1.5" hand bender please give me your needed price of my hand
@swagelok
@swagelok 3 жыл бұрын
Hi Abu, We are happy to help. Please contact your local sales and service center regarding your question about pricing. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center
@ucvan7900
@ucvan7900 11 жыл бұрын
Hello Swagelok, I have some questions want to ask. Please help!
@angelswarriorsBTS
@angelswarriorsBTS 10 жыл бұрын
Can I use it with steel solid tube bar 6mm? Thanks
@Kalicdire
@Kalicdire 9 жыл бұрын
+Angels Warriors Team iv used one of these for 12 mild steel rod pretty effortlessly i found stainless 1/2 tube harder
@acquiesce022
@acquiesce022 11 жыл бұрын
M'kay, I've been using Rigid hand benders for approx 20 yrs and have to say that the lever (non stationary) handle's adjustment for >90* would've been such a welcome change.... Hmmm, need to look into purchasing a set.
@1handybunk1
@1handybunk1 6 жыл бұрын
you will never look back. They last and perform so well with less effort.
@Swampy0110
@Swampy0110 6 жыл бұрын
Unless you’ve gone back to ridged for the 606 series benders, even better imo
@silvernaturemusic599
@silvernaturemusic599 4 жыл бұрын
Does anyone know any tool for bending tube to Parabolic shape ?
@swagelok
@swagelok 4 жыл бұрын
Hi SilverNature Music, Please reference our tube bending catalog to determine if our available tube benders will meet your needed requirements. The catalog can be found here: www.swagelok.com/downloads/webcatalogs/EN/MS-01-179.pdf
@tebbink
@tebbink 3 жыл бұрын
Amazing review. 👍
@Supramonk
@Supramonk 8 жыл бұрын
were can i buy this in india new delhi and how much costs this tool
@พระครูวิบูลกิจจารักษ์
@พระครูวิบูลกิจจารักษ์ 6 жыл бұрын
Were can I buy this in Thailand and how much costs this tool.
@mannabarbhuiya1
@mannabarbhuiya1 6 жыл бұрын
Amazon India, go online. It will cost 1200 rupees hardly
@meaganbarnett4709
@meaganbarnett4709 6 жыл бұрын
Lowe's 13.00
@garysmart1
@garysmart1 10 жыл бұрын
how much for this thing? can i use this with brake line
@JustinCrediblename
@JustinCrediblename 7 жыл бұрын
like 200 bucks on ebay
@derheeheehee6941
@derheeheehee6941 3 жыл бұрын
How do you make a coil?
@swagelok
@swagelok 3 жыл бұрын
Hello, Your local sales and service center will be able to answer your question. You can find their contact information here: products.swagelok.com/en/locator
@mozibulshameem01
@mozibulshameem01 Жыл бұрын
I'm from Dhaka, Bangladesh...I want to collect all series like the tools...if you kind enough contact pls.
@swagelok
@swagelok Жыл бұрын
Hi Mozibul, Your local sales and service center will be able to assist with your inquiry. Their contact information can be found here: products.swagelok.com/en/locator.
@ahmadbodayre5659
@ahmadbodayre5659 6 жыл бұрын
I am from jordan how can I get this item ?
@mohdshakir4516
@mohdshakir4516 2 жыл бұрын
Vvv thankful v good
@KISSMYACE3203
@KISSMYACE3203 4 жыл бұрын
Where are your benders made?
@swagelok
@swagelok 4 жыл бұрын
Hello, The country of origin for the hand tube bender is the United States. Your local sales and service center will be happy to help answer any further questions. Contact information can be found here: www.swagelok.com/en/locate-a-sales-service-center
@zaheeruddinbabar6385
@zaheeruddinbabar6385 7 жыл бұрын
can it available in india
@lorenzobarrientos7986
@lorenzobarrientos7986 8 жыл бұрын
hola amigos ....el tubo de acero es conveniente pedirlo recocido es mas blando y mejor para las curvas
@panka624
@panka624 8 жыл бұрын
त्दुग्क्सुद्तूच्फ्यिफुग्ग
@panka624
@panka624 8 жыл бұрын
75र775र्घ्च्ज ह्व्चज्व्वझ्जुरेगु
@irfanalfa3582
@irfanalfa3582 3 жыл бұрын
Thanks sir ... Very nice vedio
@naturestan
@naturestan 7 жыл бұрын
wow - as an armature I am amazed!
@NaveenKumar-oj7xh
@NaveenKumar-oj7xh 4 жыл бұрын
As an WHAT??
@naturestan
@naturestan 4 жыл бұрын
@@NaveenKumar-oj7xh amateur -it's my idea of slang to let anyone reading that I'm not a professional - ty
@702ringo1
@702ringo1 7 жыл бұрын
Thank you-excellent instructional video.
@acquiesce022
@acquiesce022 11 жыл бұрын
Actually the trade terms are "gains" and "losses", pipe can't "grow" (however, you may wanna try viagra); if anything your final overall length will be less than your original. For sizes between 3/16" (4mm) to 1/2" (12mm) tubing, a good rule of thumb is approx 1/16" (1.5mm) "loss" per 15 degrees bent successively. The most difficult length I've done was: approx 25 bends of various angles (from 15 to 120 degrees) along a 20ft length.
@kanzo1234
@kanzo1234 10 жыл бұрын
I need like this for stainless steel 16mm pipe... does it possible to find it ??
@zaldybartolome1468
@zaldybartolome1468 2 жыл бұрын
How much
@swagelok
@swagelok 2 жыл бұрын
Hi Zaldy, We are happy to help. Please contact your local sales and service center regarding your question. Contact information can be found here: products.swagelok.com/locator
@janibashamolla
@janibashamolla 5 жыл бұрын
Thanks a lot sir for good teaching...
@Barmanji23
@Barmanji23 6 жыл бұрын
Can this hand tube bending machine bend 360°?
@dancom3207
@dancom3207 5 жыл бұрын
You can but it's difficult.
@diazaa
@diazaa 4 жыл бұрын
360° without moving the tube? No. The die doesnt have the groove all the way around. Anything over 180° is almost impossible as the tube will be trapped in the bender.
@LuisRodriguez-vy5qg
@LuisRodriguez-vy5qg 8 жыл бұрын
dose anyone know the formula to make kicks?
@luismagana8583
@luismagana8583 8 жыл бұрын
Luis Rodriguez i have all the chart
@niceking8346
@niceking8346 8 жыл бұрын
luis magana @ can u send a email niceking07@gmail.com
@tong7145
@tong7145 7 жыл бұрын
luis magana can you also send me the charts for the kicks too? gnottong57@yahoo.com
@kendefandal
@kendefandal 7 жыл бұрын
Can you send me email please Alberto.sorto@yahoo.com
@nathanchung4299
@nathanchung4299 7 жыл бұрын
Could one of you kind lads semd me it also please??
@SuperBrianGames1
@SuperBrianGames1 8 жыл бұрын
Great video
@hacenebennour6727
@hacenebennour6727 7 жыл бұрын
احب الة القويص
@ابوالايامالحزينهابوالايام
@ابوالايامالحزينهابوالايام 7 жыл бұрын
شكرا لكم على هذا المقطع
@williamquishpe5530
@williamquishpe5530 6 жыл бұрын
Muy buenas nochez mi estimado pero seria bueno k lo reprodusca en español
@พระครูวิบูลกิจจารักษ์
@พระครูวิบูลกิจจารักษ์ 6 жыл бұрын
ราคาเท่าไร สั่งซื้อ และจัดส่งอย่างไรครับ
@ardentdfender4116
@ardentdfender4116 8 жыл бұрын
Great video, on point informational and great demo.
@shamayachelseaacedilla8087
@shamayachelseaacedilla8087 5 жыл бұрын
how much?
@swagelok
@swagelok 5 жыл бұрын
Hi Shamaya - Your local sales and service center will be able to answer your question. You can find their contact information here: www.swagelok.com/en/locate-a-sales-service-center
@eagle2026
@eagle2026 3 жыл бұрын
Good👍👍❤️❤️
@depiupp
@depiupp 11 жыл бұрын
how to buy
@cheng0930242710
@cheng0930242710 8 жыл бұрын
……台灣Taiwan……那裏買的到
@dharmesh.jpatel2013
@dharmesh.jpatel2013 6 жыл бұрын
thanks
@jkj1459
@jkj1459 8 жыл бұрын
very nice
@Inkog2004
@Inkog2004 Жыл бұрын
nice video. suggestion. please turn down the music or just remove it next time.
@pargatsingh3449
@pargatsingh3449 7 жыл бұрын
thank you my best friend
@dsh390
@dsh390 9 жыл бұрын
Thanks
@dimenorbikeeskate.8770
@dimenorbikeeskate.8770 6 жыл бұрын
beatyful
@malaybarman5821
@malaybarman5821 8 жыл бұрын
good
@FragEightyfive
@FragEightyfive 11 жыл бұрын
I want one of these so bad
@MohdAli-uy5fg
@MohdAli-uy5fg 5 жыл бұрын
All benders has their own tactics
@diazaa
@diazaa 5 жыл бұрын
There are two ways to bend tubing, the correct way and the incorrect way. All benders should be bending the same way, there are not more than two correct ways to bend tubing.
@anasfurqan809
@anasfurqan809 6 жыл бұрын
rs kitne hai paise
@reparacionesmarsancoatza9593
@reparacionesmarsancoatza9593 10 жыл бұрын
Muy bueno
@welderdada
@welderdada 7 жыл бұрын
" ◇ ' this banging process
@T-REXS710
@T-REXS710 5 жыл бұрын
Super
@abdikarimmibrahim591
@abdikarimmibrahim591 9 жыл бұрын
love it
@middlemanclayton1
@middlemanclayton1 10 жыл бұрын
Mericah!
@68DT103
@68DT103 8 жыл бұрын
What he has at the start isnt what he made at the end. His run after the first bend was longer at the start because he aligned his bend mark with 0 not L as he says later........Come on swagelok.....you can do better than this!
@bryonweatherford1772
@bryonweatherford1772 5 жыл бұрын
What you talking about mark was right on the L
@user-qp6cm8lb2n
@user-qp6cm8lb2n 5 жыл бұрын
You line the "L" up for your 90 degree bend bit drag the 0 to the 90 degree mark on the dial. ...... Come on Greg m ......you can do better than that
@marciometalurgicoservicos9107
@marciometalurgicoservicos9107 5 жыл бұрын
Maravilhoso
@derheeheehee6941
@derheeheehee6941 3 жыл бұрын
Ok, now show us how to make a coil.
@MrNams
@MrNams 2 жыл бұрын
wow cool tool #mrnams
@allentowngator
@allentowngator 2 жыл бұрын
Lay all measurements out at one time making sure you burn the gain of each measurement after the first one the start bending. Marking and bending one measurement at a time it's called getting your ass fired!!!
@ganeshsethi7778
@ganeshsethi7778 6 жыл бұрын
Ganesh Sethi
@pedrorivera719
@pedrorivera719 10 жыл бұрын
No
Bending Stainless Tubing on a Pneumatic Oil & Gas Valve
13:05
Kimray Inc
Рет қаралды 69 М.
4 Pipe Bending Mistakes EVERYONE makes
14:31
plumberparts
Рет қаралды 97 М.
Tube Bending Video
18:09
International Fluid Power Society - IFPS
Рет қаралды 221 М.
TFS: Tube Bending Basics 1 - What You Need to Know
24:43
The Fabrication Series
Рет қаралды 2,8 МЛН
Copper Tube Bending Tools & Methods! Lever Type, Ratcheting, Spring, Hands!
8:08
not many people know how to make metal bending tools
9:05
KULI WELDING
Рет қаралды 3,8 МЛН
Mastering Small Tubing bends: A Step By Step Tutorial And demo
5:23
Blue Collar Drew
Рет қаралды 98 М.
Hard Line Tubing Basics - Fuel, Air, & Oil System Plumbing
13:29
HotRodHippie
Рет қаралды 120 М.
Cheap Tube Bender
6:45
Scantron's Garage
Рет қаралды 1,9 М.
How To Bend Tubing
7:49
Valin Corporation
Рет қаралды 522 М.