Sway Bar Links Replacement on Jeep Grand Cherokee

[@myjeepwjarebuildpaulsteven7986]

A really good Video and nice looking Jeep ✅🇺🇸

[@TheHappyLife-h7b]

Thank you for the comment and thanks for watching.

[@ourbeaglesnancystevens2825]

I used a Vice to press mine in. Good video✅🇺🇸

[@TheHappyLife-h7b]

Thanks for watching!

[@toploadtele]

Nice! Did the new links make it drive any better? Any noticeable difference in handling or cornering?

[@TheHappyLife-h7b]

It definitely corners better but overall the ride is the same if not a bit stiffer. I almost never go off road so this set up works well for me. Thanks for watching!!

[@darrylfinley9369]

I have the 2 inch puck lift on my WJ as well. Is it best to get the extended links as you did? Or does it matter?

[@TheHappyLife-h7b]

I don’t think it really matters as long as you are keeping it on the road.

[@jesuslongorialozano6148]

Hello, Which moog unit did you upgrade? can you share the link with me? Excellent videos

[@TheHappyLife-h7b]

Thanks for watching. I used the Moog SSD 107 from Rock Auto for the steering stabilizer . The sway bar links were from Zone Off-road.

[@americawehaverights3926]

U would have more room if you took your tire off.👍🏻

[@TheHappyLife-h7b]

Thanks for the tip and thanks for watching!

[@johnbarry2657]

Hello, I'm considering repeating as you did in your video here but I'm wondering since I have a WJ with a 2 in lift, did you find it necessary to replace the track bar with an adjustable version? I recently had a shop replace mine due to death wobble (which solved it at the time) but didn't think to consider if it needed to be longer due to that little bit of lift.

[@TheHappyLife-h7b]

I am going to do that next. Apparently it is not needed with a 2” lift but I noticed a very slight wobble above 55 mph or so. Thanks for watching!

[@johnbarry2657]

@@TheHappyLife-h7bthanks for the quick reply, from my research I saw that as well but I'm about to install the links and a new tie rod and dampener first so we'll see if that does the job. Good luck with yours!

[@CameronDC-Grimes]

@@TheHappyLife-h7b hey can you please share your torque applied in Ft-Lbs for the upper nut and lower nut for the Rear sway bar links? I believe one is 40ft-lbs and the other 68ft-lbs but I'm not sure which. I found the front torque spec to be 78 Ft-Lbs upper nut, 78 Ft-Lbs lower nut.

[@ftochris965]

How are they holding up?Did they rust?

[@TheHappyLife-h7b]

No rust so far and thanks for watching!

[@armandomendoza5879]

Did you upgraded your steering stabilizer since you lifted the jeep?

[@TheHappyLife-h7b]

Yes I did. I upgraded to a Moog unit. However I did not do a video on that.....camera issues at the time.

[@jesuslongorialozano6148]

@@TheHappyLife-h7b Hello, Which moog unit did you upgrade? can you share the link with me?

[@armandomendoza5879]

Awesome thanks for the help