EPIC Video! "NOW ANYONE" Can Make Their Car Battery LAST FOREVER!! YOU HAVE TO SEE THE FULL VIDEO!

This Tool amzn.to/3L0yP5v Will save you hundreds and hundreds of $$$$ FOLKS this unit is so small, it is actually smaller than my hand, and does so many things it will blow your mind...it re-vamps car and truck batteries, it welds and it staples.
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Tools Below
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
Welder Used in video amzn.to/3L0yP5v
You can go with the 180 AMP amzn.to/3OX5pqa
or
You can go with the 200 AMP amzn.to/3EjGjgd
Syringe amzn.to/44tvouU
Distilled Water amzn.to/3L0brFo
Best Welding Gloves amzn.to/3KZS53b
Best Welding Helmet amzn.to/3OTXmKF
Wall Mounted Power Washer amzn.to/3PeGYpq
Original Battery Video • How To RENEW CAR & TRU...
Our Motorcycle Channel / sweetscoots
Camera Used in this video amzn.to/45khwnm
For OUR FREE GIVEAWAY
Just Send a comment to us that you want a free sample in our free giveaway.
Our channels:
/ sweetprojectcars
/ mrknowitallguru
/ sweetscoots
/ sweetmotorhomes
ALERT**** Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/...
________________________________________________
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Guys and Gals if you did not watch the entire video you need to stop right now and go do so, you will be glad you did, we promise.....This Tool amzn.to/3L0yP5v Will save you hundreds and hundreds of $$$$ FOLKs this unit is so small, it is smaller than my hand, and does so many things it will blow your mind...it re-vamps car and truck batteries, it welds and it staples. Quote of the Day: *Your talent determines what you can do. Your motivation determines how much you’re willing to do. Your attitude determines how well you do it*

[@SVMSICE]

I’m gonna tear apart my microwave and make myself one of these units. That’ll save even more money. Thank you for the idea! You rock 🤘🏼

[@rhondaholland4604]

Okay, ready to buy but have 2 questions. 1) Will this do both car and motorcycle batteries? 2) Is the smallest version the one we really want or should we use the discount to jump up another level to the 180A (or even the 200A)?

[@Leonardokite]

Almost ordered the 200 AMP, but no discount so settled for the 140 AMP. Considering how bad I suck at welding I probably won't use it as a welder anyhow. I probably should've done this a while ago but ended up getting even a better deal by procrastinating. Sometimes things just work out LOL. And I do have two batteries now that need the treatment.

[@billiemcfadden5808]

I'd love to sample that lube you are apparently a big fan of.. do I leave my address here? Is this comment even in the correct spot to request the sample? Please let me know!😬 Also, thank you for ALL the phenomenal info, tips, advise, knowledge and expertise that you always share so generously! It's very much appreciated 🥰

[@SweetProjectCars]

LOL, thanks for watching, have a great week. mad Mike

[@benjaminchavez1232]

I was literally about to pull the trigger on the 24" model from your first video... then I saw this! And i was needing a small welder that I almost picked up from harbor freight for 80 bucks. What perfect timing of me finding this. Thank you so much! My friend just paid 200 for a new battery so I feel like I'm getting one heck of a deal. Much thanks and respect from New Mexico USA

[@SweetProjectCars]

Glad we could help Benjamin! Thank you for watching and sharing, have a great week my friend. mad Mike & team

[@kidsteach938]

hey! Nice little machine. The battery looks ancient, but the 11/20 sticker would indicate that it is less than three years old?

[@alexguzman5547]

These days it's like a lot of batteries are almost made to die right after the warranty period is up. Where I'm at that's pretty much either a year or 18 months, so anything past that's a huge win 😅

[@SweetProjectCars]

It's a great little machine my friend! This is a lawn tractor battery, they usually only last one season, we've kept it going for almost 4 years for a savings of over $200. Thanks for watching, have a fantastic week. mad Mike

[@rosaurobusarangjr378]

I also have a old car battery 4 years old ,should I clean it first? I mean drain the liquid battery? Wash it with baking soda?

[@Faith_Plus_One]

If I'm not mistaken - if the battery is dry you need to fill it up with 30-40% sulphuric acid. I tried to fill completely empty moped battery just with distilled water and use this process, and got some voltage enough to power up little motor, but when I tried to start scooter it wouldn't start. ​@@rosaurobusarangjr378

[@Leonardokite]

What! But the zip-tie repairs look so cool Hahahahaha. Seriously, I've seen plastic bumpers that were ripped apart and repaired with zip-ties. It looks hilarious LOL. Now I cannot believe that the welder is 60 bucks! You double your money on your first battery repair. Now that is one amazing tip my friend. Plus you get the bonus plastic repair kit also. You knocked this one out of the ballpark Capt.

[@SweetProjectCars]

It's sweeeeeet Leonard!! What a fantastic little tool, you are going to love it! The one we use in this video will do any battery that you have with ease! Thanks for watching as always, hope you have a great week my friend. mad Mike

[@sellanything]

Thanks a lot! I bought the "VEVOR Stick Welder, Mini and Portable 140Amp 2 in 1 ARC/Lift Tig Welder Machine" and it works like a charm. Already reconditioned a car battery and a 4-wheeler battery. Awesome video!

[@Rochie]

I AM SO GLAD I CHECKED THE DESCRIPTION OF THE LAST VIDEO. Using a welder is genius!

[@SweetProjectCars]

It's a more economical option as well Rochie! Thanks for watching and commenting, have a great day my friend. mad Mike & team

[@keithbrookshire]

I just placed my order. It's worth it just for the plastic welder. Refurbing batteries is a bonus. Ten thumbs up for this video.

[@SweetProjectCars]

Absolutely Keith!! It's a great little tool! Thank you so much for watching and sharing and for the 10 thumbs up, we truly appreciate it my friend. Hope you have a fantastic week. mad Mike & team

[@FireSloth1134]

I almost bought a Harbor Freight wheeled battery charger for $150, then researched more and found I should use a manual charger, not digital w/all the safety features after reviewing your old video. Thanks for commenting on the old video to check out THIS new one because now I'm on the best path! I just ordered the 200A version since I'm thinking about learning to weld now. Even this model was 60 cheaper than that HF charger I'd have been disappointed with. And this is dead simple with no stupid safeties or "BAD" readout on a charger refusing to touch some batts. Thank you! 🤘

[@SweetProjectCars]

Glad you liked it and were able to get your hands on one Andy! You won't be disappointed my friend! Thanks for watching and sharing, hope you have a fantastic week. mad Mike & team

[@enriquemejia6697]

Good decision on not buying the big HF charger..they are crap..I've had mine fail and a friend's one as well. Other HF stuff has been fine..even the small chargers have lasted over a decade..that's pretty good. My best one I found in the trash and fixed.. and old early 60's Shauer!

[@izh6421]

Would this small welded do the trick with any battery even a diesel truck battery?

[@ClaytonCollier-g8u]

When you turn that to 70 is that 70 amps? can you do this with a miller arch welder set at 30 amps which is the lowest amp setting for the welder?

[@slamdunk6170]

Hey guys my inlaws battery died out of nowhere on there 2019 nissan and I hooked up my small stick welder to it and one of the cells was not bubbling,,dead, I ran it on low,25amps, for about 3 minutes then 85 amps 2 minutes then 135 amps 1 minute with 45 minutes in between cycles,, After 4 times the cell started to come back to life,,did it 2 more cycles,,its been 2 weeks and the battery works like new ,,,this definitely works..

[@SweetProjectCars]

Awesome!! Thank you so much for watching and sharing your results, we really appreciate it slamdunk! Have a stupendous rest of your week my friend. mad Mike

[@mikeledee8786]

What do you recommend as a float/charger for 2-6 volt golf cart batteries or/and 2-12 volt deep cycle batteries? Thanks.

[@marcmaillet4858]

WOW that's so small but can do so much. I didn't know they came in such small package. I could definitely use one. Thanks for the info

[@SweetProjectCars]

Our pleasure to share Marc! This amzn.to/3L0yP5v is a fantastic unit for this process. Thank you for watching and sharing, hope you have a great week. mad Mike & team

[@marcmaillet4858]

@@SweetProjectCars haha thanks its added to the cart, another item in the cart with the other 1000s of things LOL. Your very welcome and i hope your having a wonderful week to my friend ;)

[@hawkslayer2351]

Just order this and am curious the setting you have it on? It looks lime hot start or current in the video?

[@SweetProjectCars]

Just start out on a low setting, then gradually turn it up when you get a consistent boil on all of the cells my friend. Thanks for watching and asking, have a great week. mad Mike & team

[@daffydavidyt]

Do we need the lower amperage one for the batteries or could we use one of the sttonger welders?

[@SweetProjectCars]

Any of the options will work David! Thank you for watching and asking, have a great week my friend. mad Mike

[@dogsplantscarsneatstuff176]

Mike could you tell us the make and model of the tractor the main battery in this video is off of? Is it from a 20hp small implement? It looks to me like a riding lawnmower type battery. The reason I ask is as you said in the comments most small implement batteries are good for a year maybe 2 at the outside. Thanks.

[@timbrimmer9701]

Thanks for the video! Just ordered the 200 amp version. Planning to use it on a battery that will no longer take a full charge. I would like a sample of the lube.

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@josephsteffen2378]

Great video. That charger, welder, power supply...thing is badass!

[@SweetProjectCars]

You got that right Joseph! Thanks for watching and commenting, have a great day my friend. mad Mike

[@briancooper4767]

Hey Mike! I just ordered this machine thanks to your video... looking forward to using all functions, seems like a great multi function garage unit! Feel you on the heat, we are melting here in south AL 😅

[@SweetProjectCars]

LOL, we are neighbors :) Thank you for watching and sharing Brian, hope you have a great week my friend. mad Mike & team

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@briancooper4767]

Yeah I work in Pensacola actually! Love the videos, have learned alot from you over the years and appreciate everything you share!

[@ezorro5920]

Wow! Rejuvenate flooded batteries, repair plastic, and arc weld all with one tool. Plus a 10% discount code, I think my birthday is around the corner.

[@SweetProjectCars]

Happy Birthday to YOU!!! LOL This amzn.to/3L0yP5v is a great gift for yourself ezorro!! Thanks for the view and comment, have a fantastic week my friend. mad Mike & team

[@ezorro5920]

@@SweetProjectCars Thank you Mad Mike. My birthday is just after Labor Day. I'm also praying Idalia won't affect Florida too badly.

[@RogerPack]

Stick weld...

[@triumphmanful]

How and 😊where do I buy the welder?

[@DJdavefromlondon]

Can this do deep cycle batteries. In previous videos on this tooic you recommended two different welders for regular standard batteries and different welder for deep cycle batteries. I wasnt clear why you needed two so my question is will this welder work for deep cycle ?

[@SweetProjectCars]

Yes you can DJ Dave! This is a new, state of the art welder that can be used for all lead acid batteries. Thanks for watching, have a great weekend. mad Mike

[@stevebraun8217]

I would like to check out some of that lube that you have been talking about. Thanx.

[@dsimp765]

Very inexpensive for what you get 👍. Great video. Thank you

[@SweetProjectCars]

It really is! We are very impressed! Thank you for the view and comment, it's appreciated my friend. Have a great week! mad Mike & team

[@RichardNichols-s8w]

Good evening, I watched your video, ordered the welder and would love to try the sample of the lubricant. Thank you for all you teach us!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@andreafloyd1718]

Thank you for this video. I just received my welder and tried to hook it up to my car battery, but the welder positive lead cannot fit around my round battery terminal. What or how do i fix this issue?

[@SweetProjectCars]

Put a pair of these amzn.to/3r2lT8s on the battery post, clamp the positive to it and you should be all set. Remember, when working outside the box, you need to get creative. Thanks for watching, have a great week. mad Mike

[@geoffkeller5337]

Awesome little machine! Thank you for the tips and tricks! I received my sample yesterday!!! Thank you and that stuff is amazing!

[@SweetProjectCars]

Glad you like it Geoff!! Also glad you received your lube, it is an amazing product!! Thank you as always for being here with us, it's appreciated my friend, have a fantastic week. mad Mike & team

[@Lochlee]

Now that is epic. Going to try it on my big honkin' solar batteries. They are in need of some help and at almost 1k a pop there is no way in tarnation that I can afford new ones. Thanks for the idea!

[@SweetProjectCars]

You can do it Lochlee! Thank you for watching and sharing, have a great weekend and all the best on your project my friend. mad Mike

[@kerrykoehler9112]

Will this method also work on 8V lead acid golf cart batteries?

[@chrisfreeman6540]

That's a sweet little rig thanks for showing and all ur hard work

[@SweetProjectCars]

Our pleasure Chris! It's a great find! Thank you for watching and sharing, hope you have a fantastic weekend my friend. mad Mike

[@missiletm]

Hey Big Mike, just started the golf cart batts, noticed the fluid is a murky rusty brown color. Batteries are 2020 vintage. Is that normal? They boil good on all the cells with welder all the way down

[@SweetProjectCars]

Don't over analyze the process, it doesn't matter the color my friend. Sounds like you are doing it just how it's suppose to be done. Thanks for watching and sharing, have a great weekend. mad Mike

[@gmcnelly2468]

Is the polarity positive to positive and negative to negative? (sometimes those welders have the stinger negative)

[@SweetProjectCars]

Yes. Thanks for watching, have a great week. mad Mike

[@prosperplenty2317]

Could using the welder on a battery like this cause over voltage issues?

[@SweetProjectCars]

We've never had that issue in 20+ years of doing this process. Thanks. mad Mike

[@phildunaway2922]

Hay Mike I really liked what I saw on your demo and ordered one it just came in today can't wait to try it out myself. I'll let yah know how it turns out soon. thanks

[@SweetProjectCars]

Glad to hear Phil! Thank you for watching and sharing, hope you have a great weekend and all the best on your project my friend. mad Mike

[@Faith_Plus_One]

🔻 Thank you for these amazing ideas! Just a question - if I want to recondition COMPLETELY dry lead battery, do I need to use 30-40% sulphuric acid instead of just distilled water? Because when I tried to do that with distilled water on dry moped battery only I got some current but not nearly enough to start a moped. Thanks in advance for your time! ♥️🙂

[@missiletm]

Awesome! I just ordered one. My deep cycle RV batteries need a refresh. Will this also work on golf cart batteries? If so, should I do two at a time with the 6 volt golf cart batteries?

[@SweetProjectCars]

This works on all lead acid batteries, and yes, you can do two at a time if you like, no problem. Thanks for watching and asking, have a great week my friend. mad Mike & team

[@missiletm]

@@SweetProjectCars thanks for the reply my friend, I’ve been watching you for years! Love your content brother, keep em coming!

[@mcgeheewoolf2937]

​​​@@SweetProjectCars love your channel. How would I change the process on an 8 volt golf cart battery? Can I do more than one at the same time?

[@jeffcarpenter6306]

Thank you for the demo. That is a very nice unit. I wish I could have used the discount code with in the limited time. It will be a future purchase now.

[@SweetProjectCars]

Yeah, they leave it for a limited time only, but it's still a great tool for the cost. Thank you for the view and comment, we appreciate it, hope you have a great day. mad Mike & team

[@yunick1408]

hi i’ve watched your refurbing battery videos from using a 200A charger then the 200A welding machine then this 140A welding machine… my question is after the 5x cycle of using the welding machine what’s next? from the first video (200A charger), if im not mistaken, we have to charge it with a trickle charger after the 5x cycle… do we still need to leave the caps open when using regular charger to charge the battery or do we have to put the caps back on after the 5th cycle before charging with trickle charger? hoping for your reply. thank you so much.

[@PremiumRaizo]

I'm just taking a guess but i would think you would put the caps back on and then hook up the trickle charger to it.

[@Bob-gn8ph]

​@@PremiumRaizogood guess

[@cainpaul08]

I used to live/work in Pensacola. Great town

[@SweetProjectCars]

Thanks for the comment, it's a great town indeed! Thank you for the view and comment, have a fantastic day my friend. mad Mike

[@Nico_335i_DCT]

Thanks for sharing Mike. This little unit can do a lot! Have an awesome week, regards Nico.

[@SweetProjectCars]

It's a great little find Nico! Thanks for the view as always, we appreciate you my friend, have a great week. mad Mike & team

[@aldeal3793]

That seems to have worked great for me on the last battery.

[@SweetProjectCars]

Awesome! Thanks for watching and sharing, have a great weekend my friend. mad Mike & team

[@aldeal3793]

QUESTION , so we don't have to do the 15 min on and 1hr off at 200 amps?

[@SweetProjectCars]

Just follow the video instruction my friend. Thanks for watching, have a great weekend. mad Mike & team

[@aldeal3793]

Just bought the 180 amp version and looking forward to doing the new regimen.

[@ondrejmitko3671]

Hi, did you put + on + and - on -? I mean from welder to a battery

[@SweetProjectCars]

You sure do!! Thanks for watching and asking my friend, hope you have a sweeeet week. mad Mike

[@bobmiller7426]

Which would you recommend? 140, 180 or 200? Welding sheet metal and frame.

[@SweetProjectCars]

As far as I'm concerned, this one amzn.to/3L0yP5v will work for you, we've welded up to 1/4" steel with it without issue just make sure you have the correct rod and you are good to go my friend. Thanks for watching and asking, have a great week. mad Mike

[@bobmiller7426]

@@SweetProjectCars Appreciate it Mike!

[@wintonbowman8789]

What would be the amount of time with this welder on 120v.thx

[@SweetProjectCars]

Please re-watch the video a few times and listen carefully, also, watch this additional video kzbin.info/www/bejne/Z6vCl2WNmtOSi6s it has some important information about this method. Thanks for the view, have a fantastic day my friend. mad Mike & team

[@ilikecars911]

Not a bad little unit for the money. Thanks again for another great idea.

[@SweetProjectCars]

It's a great deal for a great tool my friend! Thank you for watching and sharing, have a great week. mad Mike

[@Juanelloooo]

​@@SweetProjectCarsDonde esta julio?

[@bruceelwell4264]

If I operate this off of 110 volts, how many amp breaker do I need. I tried 20 amp and it would trip the breaker while refurbishing the battery.

[@SweetProjectCars]

Watch this video kzbin.info/www/bejne/Z6vCl2WNmtOSi6s it shows you how to set the welder to avoid tripping breakers Bruce. Thanks for watching, have a great week my friend. mad Mike

[@fab_It_garage]

Why does the welder method work better than having an old school 200/300A charger start feature? The welder was only set to 75 amps so trying to understand how this method is better than your previous video where you used a car charger. I understand the welder has extra features but IF someone who already owns a high amp charger how does that compare?

[@SweetProjectCars]

After trying and testing both methods, the welder method proved to work better and is more economical for those that don't have the required charger. Thanks for watching. mad Mike

[@fab_It_garage]

Thanks for the reply@@SweetProjectCars

[@Kevin-zc8pn]

Will this bring a completely dead battery back? How much time and amps, how many cycles? Thanks (I bought the welder)

[@jeffharrell1874]

I may have missed it, but Is there a need to place a trickle charger on the battery after performing this process?

[@SweetProjectCars]

Only if it's hooked up to something and there's a possible draw from it, for example a battery that's in a motor cycle. Hope this helps, thanks for watching Jeff, have a great week. mad Mike

[@PrinceCbass]

Do you ever add acid or replace the acid? Also, what do you do if the battery starts boiling over? I have started the process on 2 old batteries but the smaller (60ah) one is boiling over very quickly and only at 29 amps which is as low as my welder will adjust to. The larger (74ah) is boiling up nicely.

[@SweetProjectCars]

We don't usually, but we have in the past used this amzn.to/4eDBoX1 It's normal for them to boil over, just top off the cells within an inch of the tops with this amzn.to/3gb9Ni0 during resting times. As far as the smaller battery, you cut all timelines in half for that size. Thanks for watching and asking, hope you have a great day and all the best on your project my friend. mad Mike & team

[@andrewmunchkin7212]

Wow, I'm buying one 🏆🤠👍that would also fix cracked atv and snowmobile fenders too.

[@SweetProjectCars]

Right on Andrew!! Thanks for watching and sharing, have a sweeeet week my friend. mad Mike

[@niconine268]

Geez Mike. That machine is awesome. I have dead bike batteries. And i see it not only does welding but the heated staples for plastic as well like you demonstrated. Im not in the US though

[@SweetProjectCars]

I'm pretty sure you can get this amzn.to/3L0yP5v in South Africa Nico. It's a sweeeeet machine for sure! Thanks for the view my friend, have a great day. mad Mike

[@WV591]

Dan, I just sold my like new stick welder and box of welding rods practically for nothing cause i wasn't useing it. wish i had seen this few days ago

[@SweetProjectCars]

This is what we used amzn.to/3L0yP5v it's pretty inexpensive to have on hand for this process my friend. Thank you for watching and sharing, hope you have a great week. mad Mike & team

[@rg929]

I would like a sample of lube. I got this welder, its working good on my battery, just got one cell that is not responding with any bubbles. Do I need to crank it to 50-70?

[@SweetProjectCars]

Just start off on the lowest setting then gradually turn it up until you get a consistent boil on all of the cells rg929. Also, Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@vampire_kiril]

man once again you are hands down the best car channel on youtube ever.

[@SweetProjectCars]

Thank you so much Stella!! We truly appreciate the view and kind comment, hope you have a stupendous week my friend. mad Mike & team

[@ScotWalt858]

That's pretty slick right there!! Greatly appreciated!

[@SweetProjectCars]

Our pleasure to share Scott!! This is a sweeeet little unit! Thank you as always for being here with us, we truly appreciate it, hope you have a fantastic week my friend. mad Mike & team

[@muskcoder6367]

Nice little machine, thanks for another great informational video. Always learning from your videos.

[@SweetProjectCars]

Glad to help muskcoder! Thank you for the view and comment, it's always a pleasure my friend, hope you have a fantastic week. mad Mike

[@johnnyh4891]

Yep, just ordered mine, too! Love the channel!!

[@SweetProjectCars]

Awesome Johnny! Thank you so much for watching and sharing, we truly appreciate all of our great subscribers like you, have a fantastic week my friend. mad Mike & team

[@yunick1408]

should the water level be at below the cap always and even after the 5th process and before trickle charging? and also when already using a charger, should we still keep the cap open until fully charge? thanks

[@mcgeheewoolf2937]

Your channel is just the best! Does this process change on an 8 volt golf cart battery? My batteries are about 4 years old and I have lost power and range. Can I do it on more than one battery at the same time? My golf cart has six 8 volt batteries in it and I would love to do them all at the same time if that's possible. What do you think Mike? Can I get a sample of that lube too?

[@SweetProjectCars]

Hey, finally got to your comment my friend. This process works on any lead acid battery, for golf cart batteries, just cut all of the timelines in half. And, yes, you can do them together if you want. Thanks so much for watching and asking, hope you have a fantastic week. Also.............Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@mikewebbsinbox]

About how often do you have to redo the process?

[@SweetProjectCars]

It depends on your battery and it's usage my friend. There are a lot of variables, if you start to notice that the starting isn't normal, then you need to do the process again. We've had them go a couple years or more before having to redo the process shown. Thanks for watching and asking Mike, hope you have a great week. mad Mike & team

[@evlutionzllc5519]

Thank you for helping us!

[@SweetProjectCars]

Happy to help! Thank you for the view and comment, we truly appreciate it, hope you have a great week my friend. mad Mike

[@veezybee23]

Hey Mike I see there are 3 versions available with different amperages . Which one is used in this video?

[@SweetProjectCars]

This one amzn.to/3L0yP5v will do anything that you put it to veezybee! It's the 140. Thanks for watching and asking, have a great weekend. mad Mike

[@LevizGibson]

Dude! I have that exact motorcycle on my workbench that my old biker buddy gave me a decade ago!

[@SweetProjectCars]

Nice! Thanks for watching and sharing Leviz, have a fantastic day. mad Mike

[@tyronegracey6872]

Nice work I have wd-40 and pd blaster if you've got something better I would love to try it could you please send me some to try thanks!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@Boondockinit]

Hello, will this work on deep cycle batteries for my boat? Thanks in advance.

[@SweetProjectCars]

This works on all lead acid batteries my friend. Thanks for watching, have a great day. mad Mike & team

[@Boondockinit]

@@SweetProjectCars Thank you "sir", you're a genius...!!

[@MyGuyKirby]

I saw another video using that staple device. Fixed a crack housing on their tractor and then melted or filled in the the crack.

[@SweetProjectCars]

Absolutely MyGuy!! It's a great tool for sure! Thanks for the view and comment, have a fantastic week my friend. mad Mike

[@izh6421]

Thanks for the videos Mike!! I just got one question, the 180A is actually cheaper than the 140A can I go with the 180 instead of the 140 and still get the same results?

[@harutanaka3647]

I was wondering if I can used lestron 48 vdc battery charger to do the same? Any idea?

[@SweetProjectCars]

Remember, changing the process or tools used, may give you different results, the method and tools/products we use have been used by us for years with great results on our end. Thanks for watching and asking, have a great week. mad Mike & team

[@GuzzyMan]

Thank you SPC!

[@SweetProjectCars]

Our pleasure GuzzyMan!! Thank you as always for being here with us we really appreciate it, hope you have a sweeeeet week my friend. mad Mike

[@luismayen3542]

So my battery just died. Will only start the car with a jump. I just bought the welder. So now do I empty out the battery acid or do I keep the same acid and just add distilled water and hook it up to the welder? What is your suggestion. Start with fresh h2o or keep what's already in the battery? Thaks so much. I love your content.

[@cali_cal]

did you find the answer?

[@generaldistrust]

for an avg moto batt, how much time will it last *roughly* until I'll have to refurb it again ?

[@SweetProjectCars]

See our video here kzbin.info/www/bejne/gauygntnqdyjf5o we have batteries that we are still using that are up to 20 years old my friend. Thanks for watching and asking, have a great week. mad Mike & team

[@RUSHMAN452]

Will the 140 work for large batteries or do I need the 200 amp?

[@SweetProjectCars]

The one we used in the video is the only one we will be using from here on out, it has all the power necessary to do any battery size Rushman. Thank you for watching, have a great week my friend. mad Mike

[@marcob.7801]

Mike,....you are the best! Going to order one tomorrow. Is there any way to revive a 12volt AGM battery (only 2 years old but let it stay in the van w/o turnover for about 10 months) ...that reads .51 on my multimeter? Forget about the modern chargers, even IF you try to trick them. Is it possible to use this machine? How would one monitor If it was coming back to life?? Thx for all the info.

[@SweetProjectCars]

This process works on all lead acid batteries Marcob. Thanks for the view my friend, have a great day. mad Mike & team

[@livenfree]

Do I need to leave the caps off or loose while I'm charging it or can I put them back in after I top the battery off with distilled water?

[@alvarobesnier]

what about sealed batteries? any workaround

[@SweetProjectCars]

You've got to have access to the cells for topping off with distilled water, if you don't have access, you can't do this process my friend. Thanks for watching, have a great week. mad Mike

[@duperfastEUC]

So i purchased that machine and plugged it in wall and flip the switch on while hooked up to the batter and it keeps tripping my brraker. Any idea?

[@SweetProjectCars]

You are probably going to have to switch out your breaker for a 20 and get rid of the 15, it's really easy to do my friend. Hope this helps, thanks for watching, have a great week. mad Mike

[@BLCustoms]

Shucks!!!I saw your other updated video going from battery charger to buying two welders. I just ordered both welders now you come up with this one. Should I return the welders I just ordered and buy this one?

[@SweetProjectCars]

They both work Ben, but I believe this amzn.to/3L0yP5v is a little more economically priced vs. the other welders shown in our older video. It's your choice my friend. Thanks so much for watching and asking, hope you have a fantastic weekend. mad Mike & team

[@BLCustoms]

@SweetProjectCars OK, I canceled the order for the smaller 160 amp welder and ordered this Vevor. I'll keep the 200 amper for welding bigger stuff. Funny, my folks moved to Pensacola not long ago...I need to come visit them and the area. Thanks for the response

[@user-ky7ty3ie1x]

Hi what settings do i use with 240v mig welder

[@SweetProjectCars]

Just start off on the lowest setting, then gradually turn it up until you get a consistent boil on all of the cells, then follow the process shown in the video. Also, see our other videos on this method here kzbin.info/www/bejne/gn7Ynal4a7mnh6M & kzbin.info/www/bejne/Z6vCl2WNmtOSi6s they have a lot of valuable information about this process. Thanks, have a great weekend. mad Mike

[@MeAndUs3126]

Hi! I want to try out this new lub formula thingie. Have a great one!!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@dannpd1955]

I love your channel. Thanks.

[@SweetProjectCars]

Glad you enjoy it! Thank you so much for watching and commenting, have a fantastic week my friend. mad Mike & team

[@ralphchristopherson782]

Well thanks a lot! You made me spend money. Again! ❤

[@SweetProjectCars]

LOL, but you are going to save much more than what you spent my friend. :) Thanks for watching and commenting Ralph, hope you have a great Thanksgiving. mad Mike & team

[@hemiihemm]

What about jell batteries for stop and start cars???

[@hemiihemm]

What liquid would I add to it?

[@SweetProjectCars]

This works on lead acid batteries only. Thanks for watching, have a great day. mad Mike

[@hectordeanda9133]

What was the discount code? Does it work on Amazon or only directly on their website?

[@SweetProjectCars]

For this amzn.to/3L0yP5v the discount code expired, but you can get it today for a large discount, check it out. Thanks for watching and asking, have a great week. mad Mike & team

[@lc7975]

Good Morning Mike, bought the machine and turns out the car battery is sealed, same as your motorcycle battery. Are you still planning a video on how to open them? Thanks

[@SweetProjectCars]

Yes I am, stay tuned lc, that video is coming soon! Thanks for watching and asking, have a great day my friend. mad Mike & team

[@sachinprasad7162]

Hi bro i have tried mean using ronix AH4604 MODEL 200A dc welder but it didn't work out i have tried several times but no boiling of liquid in the battery i have tested it on other batteries but didn't work 😢😢😢

[@SweetProjectCars]

it is not working for you because you are not using the tools we share to use, we have spent years finding the only tools that will work for this process.... you need to use the EXACT tools we are sharing and it will work 99.9% of the time thanks for sharing

[@Halaster53]

Great video! I had no idea you could use a stick welder for this purpose.

[@SweetProjectCars]

Yes you can! Thanks for watching and sharing Halaster, have a great week. mad Mike

[@MrWinger1951]

Doesn't a modern trickle charger, if kept on the battery when not in use, do the same thing for extending the life of a battery. I have an Optima battery in a car that is 10 years old and has been on the trickle charger the whole time.

[@SweetProjectCars]

The only thing a trickle charger is good for is when a car is in storage or for a motor cycle. A trickle charger will not do anything even remotely the same as this does amzn.to/3L0yP5v There's a night and day difference. Thanks, have a great day.

[@wilsonshardwarelocksmith4051]

Mike I bought the machine but when I went to use it I had some issues. First it kept tripping the breaker. Also one of the cells bubbled way more than the others some did not really do much at all. The one cell boiled so much that it looked like smoke was coming out of it. It literally boiled all the water out of the cell after just 2 five minute cycles. What am I doing wrong any thoughts? Also will this unit work on deep cycle batteries ? Thank you

[@SweetProjectCars]

First off, I would watch the video one or more times. But here are some helpful hints: Make sure that all of your cells are full of DW, and do the process again. Leave the charger on 30, turn it on, leave it on until you see activity in the other cells. This could take 2 to 3 minutes. Once you see activity in all of the cells, turn it off, let it sit for 5 to 15 minutes. Then start the process over per the video. Keep doing the process as stated in the video, if you have completed the process as shown, and you still have cells that don't activate then your battery is junk. This happens on one in 200 batteries, that the battery is no good. As far as blowing breakers, you may have a bad breaker, you may have to replace it and we suggest going to a 20amp instead of a 15amp. to alleviate that issue. Your issues are not normal in any way shape or form, you either have a completely junk battery as well as a bad breaker, we've done this for years and never had the issues you describe so we know it's not the process. Thanks for watching, have a great day and all the best on your project. mad Mike & team

[@slamdunk6170]

That cell is shorted out,,its junk.

[@silvergrizzly316]

Sweeeeeeeeeeeeet!!! Looks like you've got something there Hammer! I may just hafta get one of them. Although, that last feature with the staple, almost looks to me like a miniature branding iron😬😂. Anywho, I really like the compact size and being able to stick weld👍I'm just surprised you didn't get the 200amp machine😁 Brother take care and God Bless! Jay.

[@SweetProjectCars]

It's a sweeeeet little device my brother!! Thanks as always for watching, hope you have a blessed week my friend. mad Mike & team

[@frankc1430]

Does this work on AGM batteries?

[@SweetProjectCars]

This works on any lead acid battery Frank. Thanks for watching, have a great week my friend. mad Mike

[@hlm3936]

Will the 200A charge faster than the 140A ?

[@SweetProjectCars]

Don't waste your money, this amzn.to/3L0yP5v one will do everything you need to do my friend. Thanks for watching and asking, have a fantastic week. mad Mike

[@Susan70003]

The ammo belt on the Armadillo?

[@SweetProjectCars]

LOL, I got him when I went to San Antonio a few years back to watch our youngest daughter graduate from Air Force boot camp. Isn't it cute :) Thanks for watching Susan, have a great week my friend. mad Mike

[@buckshot8393]

What amp welder is the one you used

[@SweetProjectCars]

We used this one amzn.to/3L0yP5v it's all we will be using from here on out and will handle any size battery we put it to buckshot! Thank you for watching and asking, have a sweeeeet week my friend. mad Mike & team

[@user-rd4gz1nc4e]

I got the welder but haven't got to use it yet. Tomorrow nights the night! Also I'd like to try your super lube you like. Thanks

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@Mrch33ky]

Excellent info! Many thanks!

[@SweetProjectCars]

Glad you enjoyed it! Thank you so much for watching and sharing, have a fantastic week my friend. mad Mike

[@MrVM41]

I've been looking for one of these on eBay since your last video, 4 in 1 welders from china, just been waiting for the price to come down to justify buying it, how did you attach the plastic weld cable? Thanks

[@SweetProjectCars]

When you open the box and get the cable, one of the ends has a screw cap and it only goes in one way. Read the instructions thoroughly before doing this process MrVM. Thanks for watching and sharing, have a great week. mad Mike

[@allenpardon8211]

Will this work with a AGM battery

[@SweetProjectCars]

This works on all lead acid batteries Allen. Thanks for watching, have a great week. mad Mike

[@marinopacentrilli9533]

Doesnt work every time I had old battery and tried many cycles but although all the cells bubbled it still wouldnt go over 7 volts. I will try it on some batteries that didnt freeze. Unfourtunately I live in a place where 30 below is not uncommon and a frozen battery suffers internal damage. If the case is bulged its probably toast . .

[@SweetProjectCars]

This will not work in any way, shape or form on a battery that was frozen, but with batteries that have been cared for that lose their power over time, this will work perfect. Thanks. mad Mike & team

[@JohnBean-hm1sm]

Can you do it on a battery that is not yet dead?

[@SweetProjectCars]

Absolutely! That's the purpose of this video, do it before it's completely dead. Thanks for watching and asking, have a great week. mad Mike & team

[@JohnBean-hm1sm]

@@SweetProjectCars Mad Mike is the best!🙃

[@Tom_Moscar]

Any technique for AGM batteries?

[@Tom_Moscar]

Never mind. I just read it's not. Great video.

[@SweetProjectCars]

Sorry buddy, this works on lead acid only. Thanks for watching and asking, we really appreciate it, hope you have a fantastic week. mad Mike