Switch Panel and Control Assembly for Jeep JK - Install, Test, and Review!

Lets check out the Voswitch 8 gang switch pod for 2007 - 2018 Jeep Wrangler JK and JKUs. This kit includes an overhead switch panel for the interior of the jeep, and a smart control assembly that contains all the relays and fuses. Hope you enjoy! (Links below)
Voswitch 8 switch system (all colors) - amzn.to/3gTUv1D
Some other options from Voswitch/Appollointech:
Voswitch 6 switch system (all colors) - amzn.to/2WiEURA
Voswitch A-Pillar 4 switch system (red) - amzn.to/2OkI9TZ
Voswitch 8 button switch pod - amzn.to/32cA1gD
*All Amazon links are affiliate links
--Facts about the Voswitch----------
Switch panel
- Overhead switch panel with 8 on/off rocker switches
- Switch panel lit in red, green, or blue
- Touch sensitive master switch and brightness control
- includes 15 switch cover plates
Control Assembly
- 8 40amp relays and 8 30amp fuses
- inline 100 amp fuse
- 11v cutoff (saves battery)
------------------------------------------------------------
Tags:
jeep jk switch panel, jeep wrangler switch pod, jeep wrangler switch panel install, jeep spod switches, jeep spod alternative, overhead switch panel, voswitch jeep wrangler, apollointech jeep wrangler install, apollointech, voswitch installation, jeep rocker switch panel, 8 gang switch panel install, best jeep wrangler mods, jeep relay box, jeep relay panel, jeep switch system, switch pod, jeep mods, jeep parts, jeep wrangler, jeep jk mods, best jeep wrangler switch system
------------------------------------------------------------
Music:
----------
Track: I Am OK - Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: • I Am OK - Vishmak | Fr...
Free Download / Stream: alplus.io/i-am-ok
-----------
Misty by H5 audio DESIGN: / h5-audio-desig. .
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
creativecommons.org/licenses/...
Music provided by Free Vibes: goo.gl/NkGhTg
----------
Rexlambo - sunrise
Creative Commons
Free Download + Stream: fanlink.to/r_sunrise
----------
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Fredji - Happy Life (V...
----------

[@chadjarnigan214]

i mean this guy makes videos for beginners... meaning if you are new, he makes it super simple. This channel is on top of my sub list.

[@TacticalJK]

Thanks!!

[@brysonhuntington7791]

Holy cow Brother, i gotta say i watch a lot, i mean a lot of jeep install videos. You have, by far some of the best camera placements, instructions, clarity, knowledge, and all around jeep videos! Keep up the great work, i look forward to your channel growing and getting better! You are very informational and showing, which is what we viewers like and appreciate, definitely subscribed! Keep up the great work!

[@brysonhuntington7791]

ALSO< i was almost your 1000th subscriber. I was the 999th hahah.

[@TacticalJK]

Thank you so much!!!!!😄 It means a ton, and im super glad that your enjoying the videos!!!!! Thanks again!!!

[@mikedonnelly18]

I have been looking for something just like this. Your videos are so much better than Extreme Terrain and Quadratec. Keep up the great work. Looking forward to seeing more :)

[@davidstudey6496]

Yep, I watched your video!!! Awesome!!! Bought mine - easy peasy!!! Thank You.

[@solarasfire]

Great video! Thanks! New Jeep owner (2021 Gladiator) and know nothing about working on cars but you made it look very simple. Thanks again!

[@TacticalJK]

Thanks! And welcome to the jeep club!!!

[@solarasfire]

I also ended up getting this switch, but the one that goes on the dash.

[@The-real-CrackerZack]

Very nice panel and great vid. Will be getting this. Thank you

[@TacticalJK]

Thanks, and awesome!!

[@SierraBravo7970]

Great video! It’s much appreciated

[@toddplager8676]

I put two of these in .... if you ever run into this system not working .... mine was reversed positive was negative and so on. Flipped the + and - never had a problem again. Great video bro!! Weird, but this is what the tech said through Apollo Intech!

[@blackdiamondrob]

great vid.... i have the flat panel from Voswitch and really like the look of it. i think it gives it a more modern look over the box look.

[@TacticalJK]

Thanks! Im team rocker switch, but the newer flat panel one is pretty sweet!

[@jdjeep46]

Thank you. I ordered the kit and with the help of your video will install.

[@TacticalJK]

Awesome! Let me know if you have any questions during install!

[@jdjeep46]

Tactical JK great, thank you. I am looking forward to watching your other videos.

[@roymenke1909]

Good video! Very informative!

[@TacticalJK]

Thanks!!!

[@bieber_lives7682]

great video, very clear and concise. Keep up the good work and you could be possibly one of the best reviewers/installers on KZbin.

[@TacticalJK]

Thank you! I really appreciate it!

[@sportdriver]

Good video. Very well done

[@TacticalJK]

I really appreciate that - thank you!

[@UPsargestoys]

Quality video !

[@TacticalJK]

Thank you!!

[@MrGotti13]

Nice video!

[@TacticalJK]

Thanks!

[@nyglover]

I’m sold thanks

[@DarkOpsSurvival]

Thanks for the information….mine went out and could not figure out I accidentally touched the master button!

[@markwright340]

Great video sir!! You always have great content.... I was wondering what all you have hooked up so far?? I am wanting the 8 switch panel but I don't know if that might be overkill. But I also don't wanna regret getting only the 6 switch panel. Any recommendations??

[@tommythebeeman7396]

Great video, very well done! Straight forward and easy to follow! Do you know where we can get additional switch plate cover plates? I like some of the unique plates like, Sasquatch, Turn something On, etc...

[@TacticalJK]

Thanks! The best place I have found would be this ! www.otrattw.net/Contura-V/ I believe the rockers are the same and will fit this panel no problem, but I haven’t tested so cannot confirm. They appear to be the same standard style

[@shadwedel941]

Great video, nice camera work! I was wondering if it would be possible to replace one of the switches with an aftermarket momentary on/off toggle switch? I would like to add a switch for my winch in/out control.

[@TacticalJK]

Hey! The switches can easily pop in and out, so I believe you could definitely replace one with a aftermarket one. That said, for a winch in/out, you might would have to run your own wires to the panel since the current switches are 2 stage and that switch would be 3 stage.

[@Jake-pq3iz]

You need to remove their fuses as it applies to your application. I replaced every fuse they supplied.

[@calebtitus3342]

What fuse slot did you end up using in your fuse panel for the fuse tap after trial and error? Using the panel with the fuse tap hooked to ignition do you still have to hit the main power on the panel every key up? Or is it possible to leave main panel power on to turn on and off with just ignition?

[@johnra1269]

I placed in a 6 switch rough country kit a few years ago. Considering a new one if I go with more lights.

[@TacticalJK]

Sweet!👍🏼

[@josuecoronado2403]

Great video! How are they holding up 10 months later?

[@TacticalJK]

Great! I have used the switch panel for several projects with no issues. Definitely would still recommend

[@roquemonteleone4428]

Nice video... does is have a cover on that sqare on the top? Or does it stay open? An open Ning like that so close to the roof makes me worry bout a possible drop falling in there from the freedom top

[@TacticalJK]

The hole on the top stays open, and the latch in the freedom top actually slots inside the gap when the top is on ( so it would be hard to DIY one with the top on). I think you have a good point tho, and I will probably DIY a cover for mine if I plan on taking the top off for a while. I don’t believe anything inside could be damaged by water, but it still seems like a good idea to cover it up!

[@mjoet731]

Great video. I would assume not, but does the switch box hit the freedom panel footman's loop latch? Does it make it harder to access it?

[@TacticalJK]

Thanks! The latch fits in the gap on the switch panel and is just as easy to open. You just hook you finger on the passenger side end of the latch rather than grabbing it from the bottom.

[@mjoet731]

@@TacticalJK Great thanks! Again, really well done video.

[@joshnasche5495]

Know if this could work with an older jeep, like a jeep wangler YJ? Or have to look at something different but similar?

[@TacticalJK]

I don’t think it will fit anything but a JK without going full DIY on it. May have to look for something similar!

[@clintdickerson1673]

Mine is in the mail! I just ordered a new front bumper with winch as well. My question is, should I run my winch directly to the battery or run it through the Voswitch or is it possible to do both? If so how? Just wondering what the best/safest setup would be.

[@TacticalJK]

Awesome! Im not sure what the best winch setup would be. I would assume that you would need to run the main winch power to the battery, and then the in/out signal wires from the winch to two separate switches on the voswitch. I haven’t attempted that before, so hopefully someone else that has can chime in!

[@DarthJeep]

Does it block the latch for the Freedom Panel at all? It's a bit hard to tell from the visuals. Kinda looks like it does.

[@TacticalJK]

It kinda blocks the bottom, but you can hook your finger around the end and pull it no problem.

[@dmoskk]

Are these new to market or discontinued? I can't seem to find this kit anywhere and its exactly what I'm looking for.

[@TacticalJK]

I checked their website and it looks like they are out of stock of just about all of there products, Im assuming due to covid :( I do not believe they are discontinued tho, just out of stock. www.voswitch.com/Jeep-Wrangler-c29490.html

[@sportdriver]

Amazon has a few of the blue and red ones. I can't find the green one.

[@jakesullivan8925]

How much does it cost

[@jdjeep46]

If I install this kit and then buy KC HiLites, the KC HiLite wiring comes with a relay. Does this mean I don’t have to use the relay from KC Hi!ites because the switch kit already has relays? Sorry if this is a dumb question lol.

[@TacticalJK]

Yes, you should be able to wire the lights directly to the kit without using the relay provided with the KCs, if I am understanding that correctly. This kit eliminates the need for a relay wiring kit, so you would not have to use the one that is provided with the KCs

[@jdawg2474]

Would you recommend wiring your rgb halo drls to this since you are connecting your switch pod to the fuse box?

[@TacticalJK]

I think that would be a good plan.

[@jdawg2474]

@@TacticalJK thanks

[@brbadventurer]

I like the control box, I am not so fond of the master power for the switch panel. Some of my lights I want to turn on only when the high beams are on others I want on only when my park lights/head lights low beam (fog lights) are on, other things like my air compressor I want on with the key, does this kit provide that function?

[@TacticalJK]

No, this panel does not allow for that level of custom setup. Would need to do some DIY

[@senditentertainment4361]

I’m only having 1 problem with this kit. For some reason, mine doesn’t fall on the hook like yours does, it’s getting caught up.

[@TacticalJK]

I would say to completey remove the screws and bar from the top of the switch unit and reinstall the screws while holding the unit in place. Before my install, I adjusted the screws so that the bracket fit perfectly in place. But if it's getting caught up for some other reason, then I'm not sure :( Hope you are able to get them working!

[@senditentertainment4361]

@@TacticalJK fun fact I mounted it wrong 😂

[@TacticalJK]

Nice👍🏼😂 😂Glad everything worked out!!

[@kernel837]

Why not installed a switch panel for a defense systems such as, something to drop spikes if someone is chasing you, maybe even something to push out a lot of smoke if someone is chasing you, maybe a Button to spill oil on road if you are being chase

[@TacticalJK]

Sounds like the play!!! The police may be less than impressed tho😬

[@nickh929]

When I installed mine it drains the batterie when I have the engine off

[@TacticalJK]

could it be that you R leaving it on? If you don’t have it set to shut off automatically (with the fuse tap wire I did in the video) then you would need to manually turn off the switch panel when your not using it. Id its not that then im not sure, I haven’t had any issues with mine. Hope you are able to get it working right!!

[@Jake-pq3iz]

The power dimmer button will eventually fall out.

[@darthtyranus7683]

No thanks I'd rather buy a huey chopper at that point

[@TacticalJK]

Awesome. You can put a switch panel in your Huey to start playing fortune son