SolidWorks FL Tutorial

[@theonolaivar2840]

This 2 hour tutorial on a fan ended up in my recommended. Great!

[@TheOnlyRaceEngineer]

Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot

[@pradeepr95]

Whats that Baloch in yua name.

[@Specialeffecks]

I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation. I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable). As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation). This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade. Now I know how to best mount my contact spokes for my Rotary Spark Gap!

[@designwarp9117]

Best Solidworks tutorials on the internet. Good music too.

[@HamadBuhamad]

Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need . Thank you again :)

[@ronenyudzinsky838]

You forgot to make the inside wall of the fan blade a rigid wall as well

[@suhailp4855]

please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration

[@astorimarco2211]

Thanks for the excellent video, very informative. I ask you a courtesy, can you tell me which band is playing the background music? Thank you.

[@juanpablozam5277]

SolidWorks Tutorial #262 : Rotor (coil wiring) 1:22:46 link : kzbin.info/www/bejne/jZPHn6t3p7-Eack

[@ArtsFracture1.0]

Thanks men. I was scared.

[@arjunkapadia1712]

Hey man will i make full motor or only rotor coil wiring made seperately?

[@TheJosephStalin420]

What are the specifications of your Computer, sir?

[@vithlanibhargav9643]

sirji great work please do upload this type of videos more frequently, thank you for sharing great knowledge.

[@abdullahyurtoglu]

A Question: Could you calculate the applied force on the fan blade's shaft?

[@Gillambryce]

Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!

[@leolopezc15]

@@Gillambryce Excuse me. Have you done the tutorial? Could you help me to solve some troubles?

[@Gillambryce]

@@leolopezc15 if you're asking if I can help you with cad software or simulations like these, no. I'm more of a technical guy

[@londonnight937]

@@Gillambryce I think they wanted axial force not radial force.

[@Gillambryce]

@@londonnight937 you know what I think you're probably right

[@lolTeos]

Amazing work, by the way, I was wondering if you have some tutorials related to CATIA's simulations? They will help me a lot

[@divyamanivannan2650]

where can i find coil tutorial??

[@shafiqulislamsabbir7515]

It would be helpful if you provide us the Coil file or make another video for it.

[@fjexpo]

Thanks for the video. What is the appearance you apply for each part?

[@phuccaoo]

35:52 How do you rotate it like that?

[@arjunkapadia1712]

It's space mouse. Worth 30,000 ₹ 😅😅

[@priyamkansal]

can you tell me that from where you have taken these dimensions? It's important.

[@badreddineezzine1300]

which version of this solidworks ?????

[@eshabbatan9411]

how did you get that rotating regions

[@yuanruiwang6635]

Thank you sooooo much for this awesome flow simulation tutorial!!!!!!!!!

[@bidonpomoew6536]

How to simulate a waterwheel rotation without prescribing it's rotational speed? Like let it start moving due to river flow. Thanks.

[@leolopezc15]

Good video but, I have a problem with the command Circular pattern in the time 32:18. I do the same procedure but, only the blade appears a a result. How can I get a solution?

[@إبراهيمالهلالي-ش7ش]

find any solution for that ?

[@leolopezc15]

Yes. First, I made the blade as it appears in the video. After, I used the circular pattern command and finally, I made the cylinder.

[@إبراهيمالهلالي-ش7ش]

@@leolopezc15 good job figuring a way around it , but i found that you need to do the combine command and then doing the pattern for (body) not (feature), like as in the video.

[@leolopezc15]

@@إبراهيمالهلالي-ش7ش Ok That's right. But, what I'm trying to explain there isn't an only way to make the blades. I'm learning Solidworks and there are a variety of commands that surprise me because they facilitate the design and make it faster.

[@إبراهيمالهلالي-ش7ش]

​@@leolopezc15 you can pattern one entity around it self and create a pattern, its an odd thing to grasp, but it comes in handy when doing such thing as a fan.

[@stormy8815]

I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?

[@abhijitmall2291]

sir at 53:43 all things just messed up... cursor is moving in different direction, process are going in different direction.... i had a very hard time understanding those stages

[@dimanok85]

Юб

[@jagpreetism]

Sir we have same fan You have any idea to repair it

[@eshabbatan9411]

but how can you calculate the work done

[@mohamadikhwan4563]

Hello sir, can i know why i cannot change the direction in rotating region even i put negative in the value. Hope you help me. Thank you.

[@jhonvargas7904]

I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks

[@miguelangelmontaohuerta5021]

It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?

[@martinminhhoang8739]

Do you have a simulation of a Static Mixer tutorial?

[@edgarcarrillovazquez8576]

I having problems with the CUT-REVOLVER.........what is the distance???

[@lucascasavalle]

Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!

[@luisrios8749]

Cuantas piezas tiene?

[@fendyrony3264]

Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.

[@edgarcarrillovazquez8576]

why i can noy enter your website?

[@fahadxix5640]

2:14:20 song?

[@ArtsFracture1.0]

1:32:44 where can I get this?

[@baronbarbaron]

That is awesome video. It helped me a lot, to figure out how to do some operations.

[@MJ46.91]

THANK YOU SO VERY MUCH FOR SHARING THIS EXPERIENCE WITH US, AND WISH TO SEE MORE

[@공대백수]

Can I get the rotor? from 1:22:49

[@ivanramirez5335]

Hola como cambias la dirección del vector adelante o atrás de los álabes? Cambiando el signo sólo cambia el sentido de giro de los álabes

[@nithishrajank9784]

Will you give this solidworks file

[@junjialyu6187]

Can you have the link for us to download the file

[@yugamsinghkushwaha7188]

it was very help full, but 1 error is coming when i set boundary layer for simulation it gives error its not a boundary between solid and liquid i tried many different way by selecting rotation rei=gion as face and the frame as face

[@edgarcarrillovazquez8576]

hey... does anybodu know waht is the coloor or the material for the first piece???

[@AdityaSingh-in9lr]

Hey getting this error while running the simulation ""Warning! Unable to resolve the local rotating region". Can someone please help me to solve it?

[@sarthakdiddi7662]

Where are the links to videos of Motor, Coil and Ball Bearing ? Can somebody please reply with the links ?

[@michapoterek2034]

Cool. You did amayzing work. Thank you!

[@dontsubscribeb6436]

can i do the same on catia?

[@yapbt6579]

What is yourr workstation specification?

[@yashliefernandes]

Why no sound? it will be great if we hear it too

[@Obbsnja]

instructions unclear i have a fanblade in my nose

[@spacewalker_98]

Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming

[@harywijaya4590]

Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error) Thank you

[@95Addriliant]

on my computer, at the "wizard - Analysis Type" window, the rotation value didn't appear. could you explain why?

[@Estebangoku23]

Did you solve this problem?

[@eh_mamas8038]

I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏

[@DragonWolfHowl]

Hi, what GPU do you have

[@samuelevatt124]

Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?

[@chetnaprajapati9483]

MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP

[@hamid.s.zolfagari]

give me your first music name pls !

[@felipepadao275]

I'm having an error by trying to make a circular pattern on blades... "merge error" someone knows what could be? I have combined all the parts as well

[@إبراهيمالهلالي-ش7ش]

use body not faces & features

[@AC-DC_001]

В отличии от симуляции, в реале работает по другому: разряжение происходит на всю длинну лопостей, на некотором расстоянии обнаружилась по диагонали обнаружилась отсутствие обдува от кулера.

[@priteshrajput410]

carry on your work.... and very very thanks for sharing this knowledgeable videos...☺

[@pedroalexanderhernandezriv2691]

solver abnormally terminated solidworks no se por q me sale este error

[@إبراهيمالهلالي-ش7ش]

did you fix that ?

[@Tony_Pham690]

Awesome, dear sir, what are specs of your computer I 'm using Ryzen 7 2700, does it to good for thermal - dynamics analysis.

[@SahilAnsari-gw4eh]

Error showing please check geometry

[@31rafa]

The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?

i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.

[@John.Doe.2025]

Yes you can, just press Import in 3DS and select polygon quantity.

[@sean9267]

Pretty cool how their Solidworks version isn't a buggy pile of garbage. Mine won't even run the simplest load analysis without crashing (High end machine with Xeon processor, 64GB RAM, and Nvidia P4000)

[@solidworksnew9801]

kindly upload pdf file of project. its help us for dimenshion

[@danielperoni8422]

I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.

[@300ml_brasil]

I'm a German student who isn't interested in becoming an engineer but I have worked with solidworks before and really liked it. Now I would like to use it privately which leads to my question: Is there a way to get a free version that doesn't expire after year?

[@y.z.6517]

There are open source CAD softwares. Look for them.

[@eshabbatan9411]

of course there is ways to get it free but those ways are illegal

[@shubham1e]

running the sim goes to mach speed. Is there any remedy

[@shubham1e]

its running perfectly fine but the second run goes like 'check your geometry'

[@xmenxwk]

34:30 try Shell feature next time

[@pradeeppanga6611]

Where can i get all 2D drawings of this Assembly ?

[@Oldsah]

Maybe Gosho Aoyama-Sama has some?

[@9612-x4q]

do u have any link send me pls

[@design-studiotalevski4523]

Great video. A bit slow tho, but on point. Good job!

[@chrisdrake4692]

Simulation seems wrong. Accelerating air should cause it to exit in a line - not "fan out"

[@9612-x4q]

i need solidwork software

[@aeropeoplellc8160]

this needs to have sound with it .. its quite hard to follow the tutorial with audio. Otherwise great tutorial.

[@raulduran3706]

great!! excelente muito bom , aprendi muito

[@duynguyen598]

this flow animation is available in SW2012, mr? thanks.

[@xnx304]

thanks expert

[@Nick-b2u3g]

The rotor surface need set real wall(no-slip)

[@enginadil]

can you send me this part document. I want to try this airfane? Thank you. best regardsly.

[@enginadil]

[e-mail]

[@jedidiahsawyer1363]

crazy

[@viktorbonilla5509]

When I tried to do the simulation, he told me that geometry error ... Why? :(

[@JohnDoe-iz3du]

Check rotating region part. I myself experienced the same error and I solved it by adjusting that part's feature. If it is not the case, you may check the other parts as well to see if there is any interference among the parts.

[@viktorbonilla5509]

Ok thanks!

[@mumenbanisalameh]

You must do run when motion study page is opened

[@Matlockization]

You know from the air flow chart this fan would work better if it was put on backwards.

[@JuanHernandez-yc9bm]

Good job 😀👏

[@ramymahmoud376]

good job. Well done

[@Dr.pabloschmirtz]

Estoy impresionado, muy bueno!

[@leolopezc15]

Disculpe, he tratado de seguir el mismo procedimiento pero he tenido algunos tropiezos, ¿ha podido hacerlo?

[@markiiim5188]

Wow great video

[@hyperhektor7733]

Does anyone know a similar but free software for hobbyists?

[@double_uoglobe]

Hyper Hektor www.google.com/amp/s/m.all3dp.com/1/best-free-cad-software-2d-3d-cad-programs-design/

[@Little-Joy-Official]

Nice! Dear if I give you a modal to design a machine which is not too complex(as compare to your videos) can you help me to make it. Or give me another link. Thanks.

[@y.z.6517]

In general, you should not expect people to do work for you without payment. Your friends may do *trivial* work for you gratis. If your machine can generate good views, YT authors might consider.

[@y.z.6517]

Search for CAD making company/free-lancers, or learn it on your own.

[@NoahSONG]

as far as I want to admit this is nice modeling, the CFD should not have been done this way. The CFD done here is no better than drawing random lines after the fan blades.

[@사메세임]

53:46 뭐 어케하라는거야

[@daitan963]

Im in need of simulator sir for a school project..may i get ur email sir?

[@muhammedyaserenginer]

56:13 I will continue tomorrow

[@Vr.mh.2710]

Thanks a bunch

good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol