Turbo swapped RZR RS1 hits the track for a LAP BATTLE! It's INSANE!

It became obvious why Polaris DIDN'T make this machine!
Buy from Rocky Mountain: bit.ly/2ChVhU4
Buy parts: www.sxsblogpar...
Support us: / sxsblog
Buy merch: sxsblog.com/shop/

[@c0c0asauce]

The RS1 is gonna be such a blast on the dunes with all that power.

[@turbo-brian]

They are ridiculously fun with the XP1K motor (EVO tuned) LOL Gonna be insane with the XPT motor.

[@SXSBlog]

Thing is gonna be nuts out there lol

[@obviously1373]

Unstoppable

[@michiganripper7658]

Doug kicked ass in the freedom 500 top 5 most of the race

[@SXSBlog]

Driver Doug!!!

[@toddschmidt206]

Can’t wait for silver lake to open. RS1 with paddles putting power to the ground not spinning oh boy

[@SXSBlog]

Almost afraid for that haha

[@troycropper6240]

OUTSTANDING!! Great build and absolutely in my Top 3 for favorite SXSBlog.com rides thus far! Now finish putting that car together right!! Thanks for the content guys!

[@Geoff--]

Doug, Consider firing up the welder and build a strong cage for the CF1. It’s gonna get rolled sooner or later as hard as you guys are pushing it.

[@mattwesthaver]

Turbo RS1 looks like the ultimate drivers car! Gotta love a relatively easy swap thats such a good driver right away! Keep up the good work. That record lap is going to be tough to be Doug!

[@ianmalone1419]

Sous!! You are my favorite person on the web man!!! Always have me laughing. You guys are all great! Love the videos. Your videos work wonders for us that are quarantined right now. I really can't get enough of the great vids! You guys are awesome. Stay safe and healthy.

[@darrickdykstra5579]

The cf1 on paddles is going to be insane!! Cannot wait for a dune rip!!

[@nathanpanter4625]

The Turba RS1 absolutely needs a hand brake now. The amount of potential goon riding with that would be insane! Can’t wait until you guys rip it on the trails and eventually silverlake. All that power in such a small package definitely needs to be utilized in the sand ASAP!

[@SXSBlog]

Guess the 0-60 time! Winner gets $75 in blog merch! (To the hundredth, X.XX)

[@upnorthkenny9674]

4.2 🤞🏼

[@Richard-gy1fo]

3.8

[@AustinMaxwell3]

3.9 sec

[@nwhuckin7761]

4.11

[@jasonjukich]

4.4

[@turbo-brian]

Turns out, at the end of the day, when it's all said and done, that wheel bearing needed 200 pumps of grease.

[@SXSBlog]

216!! 😉😂😂

[@archstanton9206]

Interesting video. First of all, about 30 seconds before Leo said it, I was thinking it. "Now I understand why Polaris didn't build one of these" Yep. Indeed. That said, what a rocket ship! Ya just need more room to stretch it out. It needs to be gone over from stem to stern and then tucked away for a western dune swing. It would be a blast at St. Anthony, the long steep hills and big bowls...just thinking about it makes me grin. You guys take care back there in ole' Michigan. Hope all the families are well.

[@mountainvalleyracing890]

Sous is a wheel man! Seems like he is the go to man to see how the machine works

[@dannycardin8966]

WOW what more can you say is WOW. It would have been cool to see the time difference between 2 seater and the rs1. Another day. Super dusty i was worried about you guys missing the jump or losing your depth for the corner but you guys are awesome drivers. Keep up the great work and please be careful so you can keep making these awesome videos.👍👍

[@kenleppek]

A lawn sprayer full of water behind a quad would do wonders for the dust

[@danieldunham9978]

Polaris needs to take note and make it happen!

[@ernestogarcia5597]

Exactly what I needed after a long day at work, this video and a cold beer thanks guys🤙🤙

[@Igneale]

Dude, the CF1 is awesome, probably my favorite project even over the YZF and 2JZ JP (time to finish that BTW).

[@SXSBlog]

The thing is pure madness, it's probably the most fun, and scary machine ever built hahahaha.

[@dalearcher1236]

I've watched you on your new track a couple of times now. On that berm after the jump, you always seem to run over the end if the berm. If I may make a suggestion, do a sort of figure eight corner there. Come off the and take the turn around the tree as a right instead of a left. It would add an additional element to the run, a right turn. Allowing a little more speed off the berm and a smoother transition. Anyway just a suggestion.

[@kylecube15]

Oooh i like the way you think

[@jamesglenn2006]

I love you guys describing how hard it is to drive the RS1. Would have been great if the wind was to your benefit. Doug's years off putting the power to the ground on sled give him the advantage IMO😁👍

[@DUBYA-DUBYA]

Definitely my favorite project as of now. Need to see more yxz because I love that machine also, I bet it could wrangle out a gauntlet run. Yxz gauntlet run! Props to Leo for bringing out beastmode! That car is a monster. Keep the vids coming and thank you.

[@DoubleADay]

With the same tire and suspension setup as the Flying Buffalo, forget about ghouls, I would call it the Gremlin. Not AMC but the movie characters. You guys do not disappoint! Best machine so far!!!!!!!!!

[@Corvetteran88]

That rs1 would be an absolute monster with some wider long travel suspension! Might be my new favorite machine on the channel!

[@wademoulton5109]

That was the sweetest in car audio I've ever heard in beast mode that turbo and BOV sound soooo good..

[@jeffreypauly2570]

I feel for Doug how he works and everyone else stands around

[@joolswest5480]

“Nice shirt ya goof!” Fucking laughed so hard I twinged my shoulder! Love the sousinator!😂😂😂

[@hunterservaes6209]

Anybody else miss seeing the wives and girlfriends go riding once in awhile. Made the show alot more relatable. They just kind of disappeared after the move to the new shop.

[@Richard-gy1fo]

Thats why they moved. Lol just kidding

[@gradywr]

Remember they live in Michigan with an idiot governor who has had the state locked down all spring due to the Covid19 pandemic. The only place that they can still ride legally is their track. I'm sure once they are allowed to ride on trails again you'll see more and different types of content.

[@black07rr]

Yea, their governor is a straight female dictator on a power trip

[@mattfelty9025]

You do they shut down everything for a good reason I know simple minded people won’t understand but scientist helped decide that it would happen you know people who studied for a long time in infectious diseases if we did nothing millions would’ve died

[@black07rr]

Matt Felty there is a limit and that governor is on a power trip, you can go fishing in a kayak but can’t go fishing in a boat with any motor🤦🏼‍♂️. People need to go to work, need to support there families and the economy needs to start back up. Government can’t just keep printing money out and giving people stimulus checks, my bills can’t even be paid with the damn check they offered. But I go back to work Wednesday, and I’m actually a Covid-19 safety director, which means I go in and I help companies get started back to work and make sure they’re following the proper guidelines and have what their employees need to work safely. It’s not rocket science.

[@cucolopez1942]

So glad you guys decided to run laps on the CF1, been looking forward to this big time 👌

[@SXSBlog]

Same here lol, thing is scary though, and we still need to get it around the gauntlet!!

[@cucolopez1942]

@@SXSBlog i would give anything to take it for a rip, looks insane. Excellent job Nick happy as fuck for you guys its obvious hard work pays off🙏

[@Ol_Dirty_BEAN]

Y'all need a water tank and something to drag the track with cut the dust down and smooth out all that chop sxs create

[@jeremyd1089]

Definitely need wider A-arms. I wish mine was a turbo. So fun to drive. Good job guys.

[@20stubby]

Was hoping that Rick and Mike would be timed as well

[@ElCompa_Mario]

Build it to be super fast!! For the next octoberfest races!

[@Thmper517]

There is so much dust I was squinting my eyes. Lol

[@wadepreston5298]

😂

[@SXSBlog]

Hahahaha 👍👍👍

[@jamesglenn2006]

I was holding my breath

[@rtgkiller1489]

That turbo on beast mode sounds amazing

[@marnielarocque9412]

Morning from B.C Canada dudes, i watched this awesome vid this morning and figured i best suggest that you guys put some hay bales around that big road sign because if it gets hit, which it will sooner or later that might cost you like $10,000ish, a few hay bales will prevent that. Now what you need is to get one of those chem/fertilizers for watering the track they are cheap and you can get some that go right on the back of a quad/SxS or tow behind, which will increase safety and the fun factor.

[@danielgrantcoleman]

Doug with the “I’m first” authority. Pimp

[@kevintaylor9249]

HOLY CRAP! CF1 is scary fast!! Doug is a PILOT!! I see this machine being a lot of fun but, it is the epitome of a saying my Dad was famous for "Respect it! As soon as you think you have it mastered, it's gonna bite you." Be safe guys!!

[@kirkwest5670]

This thing on a frozen lake with studded tires would be wicked fun.

[@timirving190]

Beast mode sounds so freakin cool

[@stgraves260]

Well today was awesome!!! We went to TexPlex today in the 2019 Honda Talon R. I’m very impressed with what it can do. Stock 28” tires need to be changed for sure. Went through some pretty deep mud. Didn’t get stuck but did pull some people out.

[@Velislide]

I think it's time to build a trailer to water the track, lol.

[@SXSBlog]

Pretty much at this point lol

[@wdennisbbyy]

Would be Awesome to see you guys build a custom trailer for a sxs 😁

[@outdoormanBC]

With shocks and independent rear end so it can also be sent haha

[@gsfbffxpdhhdf7043]

SXSBlog.com just get a military trailer

[@bartmaster2]

That rs1 is just so angry. I love it.

[@SXSBlog]

It's a very angry little thing lmao

[@donaldoliver3088]

This is the best build ever

[@SXSBlog]

Less fun things have been built haha

[@richp3744]

Agreed...I have plans to find where their shop is, drop off my RS1, grab theirs, and hope they don't notice! Most Fun Ever in that thing. Jelly!

[@davidwatson5622]

Did Rick run what was his time

[@Gonecheenin]

Freaking LOVE this thing!!! On edge of destruction without wise application of the throttle pedal - my kinda machine!

[@stevefendelet2871]

“ nothings wrecked, nobodies hurt!” Wow! That machine is a freak show. Loved every second of it. Cool car! Please use an ounce of caution in that thing at least until the roll cage is bolstered up. 🍻 fellas

[@qtrmilemalone]

I got you turds a stop watch for this exact reason lol! Thing looks crazy though, can't wait to see how it cyclones now haha.

[@jeffyoung2089]

Thanks guys!

[@patrickhardison3955]

Ghoul dudes on a Saturday Dusting The Heck Out Of The CF1 with Their Friends, Out Of Control, BLOWING CHARGE TUBES with the ghouls , having fun on the edge of flipping with your friends. 😉👍 Enjoyed the video , keep it up.

[@SXSBlog]

Just out dusting the HECK out of it!!

[@patrickhardison3955]

@@SXSBlog enjoyed it so much, looked like alot of fun, reminded me of my Honda Oddysey days back when i was young. 😊

[@dustinkeith8064]

Please please please do draggy times in a field I believe this is the greatest thing y'all have built to date and y'all build some monster stuff keep up the bad ass work fellas

[@SXSBlog]

That's coming!

[@CharlieboySLONDON]

Dam that thing is Faaaaaaast !! It looks like an Absolute machine and scary as hell ! I wreckon that needs a wide kit ? Doug you smashed it 👊 ps Beast mode also lived up to its name that waste gate chatter sounds like a WRC rally car lol. Great Vid as usual 👊

[@rowdybroomstick1216]

Seems to me that ol' Harry leg's needs a water tank welded to the frame and you need an excavator to dig a pond to catch some water

[@deejphatwood9946]

Rowdy Broomstick I second the pond jump!

[@tnross23]

I really was hoping to see a drag race, RS1 and one of the bad x3’s like maybe the Rick Mav!? Beast mode just isn’t even fair at this point, great video👍

[@Jgrace-hu6xn]

After riding all day yesterday in Houghton lake and Saint Helen I can still smell and taste the dust in my living room watching this

[@Dluxx99]

The turbo sound on Beast Mode sounds so flippin bad ass.

[@laytonwhite5602]

Rocklander does it have a blow off valve?? If so what kinda

[@brenthibbard1653]

I would love to see CF1 with a wider stance. Give it a little more stability in the corners. Also I really want to see a drag between CF1 vs Rick's stage 6.

[@kylecube15]

@@sam_s_ absolutely agree with that and some carnivores it will destroy everything

[@TRASHWILL]

15:09 turbo sounds are spot on Leo!

[@tHeLiNe111]

A little mechanic's trick with loose bearings is called "peening" which involves hammering with a sharp punch to create little burrs of metal. Do about 25-30 spread around the aluminum bearing space in a hub that size then press your bearing in, should fit more snug. Definitely not a permanent fix but it'll getcha ripping .

[@willriley1262]

Glad to see you all happy at the end. I do t like it when you rip on each other. Al of you guys make the channel successful. Keep up the awesome content.

[@SXSBlog]

We all do it in fun lol.

[@brettbaratheon9776]

The Turbo RZR got a double chest grab from Dougofield, it’s office.

[@cybermavrik]

Haven't even gotten past the commercial yet but... I think we can all agree... it's time to install that Evolution Powersports stage: BALLS DEEP tune in this Turbo RS 1

[@ryan_mrljak]

Things crazy fast. Gotta take it to the trails !

[@samwarner7820]

I love your guys channel. Me and my dad have a 2019 turba s and we love it. And yoo watch you guys rip the crap out of your stuff and still smile and makesure the videos are always the best. Means the world too us. WE LOVE YOU SXSBLOH

[@samwarner7820]

SXSBLOG*

[@WALTERRIFIC]

Jeez, watching those laps got my heartrate up like nothing else. Might be the NOS, too.

[@SXSBlog]

NOS and the CF1 ripping full force, good combo for a heart attack.... Or at the very least nervous sweats lol.

[@davessparetime83]

Locktite the Bearing in the Hub

[@bradswensen117]

We need to see a Doug Butterfield CF1 custom cage. That stock cage cant handle the power!

[@MrCarpediempilot]

That thing is scary! I have never seen you guys so scared of a machine! What a beast

[@krp6147]

Hey boys brilliant video, Polaris need to start building turbos rs1 that was good fun 😂👍👍

[@waynehicks317]

"Nah we wont do a lap battle, someone is going to send it too hard." Ten minutes later: "lap battle!!!!!"

[@SXSBlog]

We are easily pressured into contests 😂😂😂

[@huntermarcy7180]

You boys should do some wheelies in the cf1. Something that I need to see.

[@SXSBlog]

Agreed....

[@michaelmessner3169]

What a wonderful time. Very way cool. Heck yeah Dude!

[@mikedesilets3324]

Turbo Really Suicidal 1. If Polaris builds it, people will die. Sooo fun to watch it rip.

[@charliemartinnow3]

What a rocket! That's what Polaris should be making !

[@kenndogg7469]

Can you do a drag race with , beast mode, Rick Mav, and CF1. All of them.are awesom. But my curiosity is killing me.

[@bigtwinz3296]

18:11 beautiful driving right there Duggie Fresh!

[@markduran5975]

Rs1 new name. THE GOOLING SAVAGE

[@rzrrider3283]

Definitely the coolest thing you guys have built to date

[@capnatewr6522]

Hey guys you might look at getting a water truck to wet track to reduce dust issues. Also if you still have any pumps from the near rain out race day pump from pond to wet track.

[@bradleyban]

Nice guys!! was hoping to see you guys send the RS1 off goule hill!!

[@christopher9097]

Cf1 vs. Beastmode straight line. 🤙

[@joemorgan1470]

The RF1 needs a Doug Cage !!!

[@qdivision4120]

I can taste the dust just watching this That's a tight track . And Holy power batman

[@azflowrider]

Long travel and some 32' will take care of the 2 wheel issue, and wide open is the best in GLAMIS, Keep up the great work!!!!!

[@safetylast911]

I got myself a turbo rs1. Just so much fun it's hard to describe

[@Jnichols77]

The CF1 reminds me of a RC car on 4s batteries

[@rcmaniac5393]

More like 8s

[@billcharlene1450]

Lol!

[@zo6freak]

Leo, you need to drive that RS1 like you drove the GT3 RS. Smooth and steady.

[@joshuakriger6658]

RS1-T is such a great machine.....but every time you say CF1, it makes me think of a CF Moto machine hahaha. Great job on the swap...ready to buy one! Keep up tge great work! SOUS YOU THE MAN!!!

[@zachmonsue9402]

I'm thinking Beast Mode engine in CF1. Because you've already gone this far.

[@mattijsleerink5629]

RS1 unit of the year!!

[@jdc6927]

Anyone else fighting the urge to cough and sneeze from seeing all that dust? Turboing the RS1 is awesome. 😎That thing is crazy.

[@jamesworkman686]

Man beast mode sounds good you guys should get a water wagon or something to pull-behind mud life to keep the track wet

[@mikep8656]

Can’t wait to see the CF1 on paddles at Olds. Halloween 2020!!!!!

[@darrellcronan6686]

Man the CF1 is badass!! I saw the sweet ass Evo machine on National Geographic last night on a new Gold Rush episode.

[@zbmjwc]

That cf1 will be a super beast in the dunes.

[@codyhagel5239]

Love watching you guys rip that machine.

[@AnthonyFishervlogs]

man that thing rips

[@makcheesy8660]

This is definitely a monster. I wonder if alot more shock in the rear....or better yet i think she might be worthy of a set of Elkas all the way around to tame the beast

[@thomaspeplinski6618]

Looks like some of that berm needs to be reworked for a better line to the tree turn.

[@kylecube15]

A few comments up said go around the opposite side of the tree adds an additional figure 8 element and then you can shoot out the berm properly

[@ryanzone3675]

Another great Video for the channel!! Keep it up boys.

[@Rileyjd]

nick just sends it everytime! MINT

[@chi3f53]

I see a shop, drivers and side by sides. Hope to see a race team soon!

[@chrisdobbs9155]

Now you need to make that thing just a little wider. Love that little car.