SYMPTOMS OF A BAD OXYGEN SENSOR

[@easyautofix]

Thank you for watching! O2 sensor removal kit: amzn.to/3dU26RA OBD2 Scanner: amzn.to/3PHRplS

[@PabloHernandez-ht3gf]

I got P0410 code but I don't know if is sensor bank 1 or bank 2

[@JohnDoe-gk4kn]

Wow. That explains alot. Especially the part about unplugging the censor. My issue is the damn think is rust locked on the manifold so I treated the fuel hoping it works itself out. No such luck. I'll try unplugging it see what happens

[@That540iMSport]

Speed the video up to 1.25x you’re welcome

[@jordanselby2661]

Lmao, it’s absolutely pitiful how “normal” that makes his voice sound 😂

[@tyrekeism6153]

1.5 even works

[@idontexistneitherdoyou]

1.75 save even more time

[@sgesaucyy]

Shit even 2x

[@robertwilson7959]

Short and to the point love it, I can’t stand all the small talk in most of people’s videos that’s not what people are here for

[@Jon-dually1]

Changed all 4 on my jeep wrangler last week.. unbelievable performance increases, like new! Well worth the investment! Power increases, faster, gas mileage increases, beyond my expectations !

[@andressoto803]

Straight to the point. No blah blah blah 20 minutes introduction to get to the part we need

[@MMcGillable]

Best video on the O2 sensor ever, just plain and simple. This get a 100%.

[@joejones9944]

Great advice! I never knew You could Un-Plug The O2 Sensor to check if it's working Properly or not. Thanks, I'm about to go try this Right Now

[@mrtheoppertunist]

Bro your voice makes learning about working on my car on my own easy!!!! Appreciate it man!

[@davida871]

Thanks for confirming that a bad O2 sensor may not cause a check engine error code. I believe my 17yr old sensors are sluggish so monitors will not set. Installing 4 new ones tomorrow. Thank for video.

[@Modeltnick]

Straight and to the point! I learned more from your video than some of the long winded explanations! Thanks!

[@Bjmaze]

Well I gotta tell you I'm a 53-year old grandmother was no choice but to fix my own car I've been watching video after video after video yours was the best it was straight and to the point and very thorough and in the explain everything very well very well done I subscribe to your channel and please put some more on there I didn't check it out yet but I'm sure that's what my problem is thank you very much

[@easyautofix]

Very nice, Thank you!

[@buner8159]

So basically after watching videos on camshaft, crankshaft and oxygen sensors i came to conclusion they all give the same symptoms which is kinda annoying while diagnosing the problems 🤦 nonetheless great videos man:)

[@michael-angelogarnett8658]

Diagnostic scan?

[@JackJack..]

Lmaoo I’m having an issues right now I had a code p0725 for the tcm in my 2012 g37s I swapped the engine crankshaft sensor codes gone car drives fine the next night drives like shit almost shuddering on the way home when I would give it a little throttle get home scan it now I have a code po138 p2a00 after installing test pipes 😂

[@gabrielvicente6027]

Thanks for the easy explanations on how the oxygen sensor affects the performance of modern vehicles. Your explanation is simple and conveys how important this sensor to the environment. God bless

[@easyautofix]

I appreciate your comment thank you!

[@kingofhuecomundo9394]

@@easyautofix should I buy a 08 Corvette with issues 02 sensors issues should I buy it!!???

[@Fordgroup00]

Gabriel Yep 👍

[@avengingme]

More like how important it is to a properly functioning vehicle

[@neilwisnewski7013]

Good stuff. My Toyota with a 1GR-FE has 4 cats and 4 O2 sensors. Ran rough with poor fuel economy. Swapped out all 4 O2 sensors - both secondaries were outputting OV (I was fortunate enough to have access to a scan tool) - and it now purrs like a tiger cub. Just like it should.

[@easyautofix]

MARVELOUS!

[@707area]

Was your Toyota running bad before swapping the 02 sensors? I have an 05 Chevy Silverado, just swapped out the transmission and a few other parts. It ran good for a day but today it just wouldn’t give enough power, it would stay at 4k rpm at 60 mph. Had a check engine light and the only code that came up was 02 sensors. I’m wondering if replacing the sensors would fix my problem.

[@neilwisnewski7013]

@@707area Just a general feeling that it wasn't quite itself. Nothing like what you are experiencing. In all these situations, my rule is if it isn't right fix it as there is often multiple causes that combine to make all the symptoms. Hope this helps, it sounds to me like there may be other issues present. Good luck.

[@josealvarado9276]

Best video I’ve seen on bad o2 sensors hands down

[@easyautofix]

Too kind, thank you!

[@Everybodyshinetogether1]

@@easyautofixmine revved up to 2k rpm when it was cold can that be the o2 sensor?

[@elizambarcenas5766]

OMG I actually stopped crying because you just calmed me, sir. Thank you very much . Now I have a better understanding & not going crazy of how to handle my situation. God bless you

[@justinfrazier1021]

Just bring it to a shop it’s an easy fix

[@richcharles310]

Àa

[@mannymanano]

This man knows how to make videos.Outstanding.!

[@easyautofix]

and this man knows how to leave an outstanding comment!

[@JCno28]

This helped me confirm I had a bad oxygen sensor. CEL came on for bad O2 sensor, but it went away after a couple days. Decided to order a new 02 sensor anyway. Car's been shaking slightly in idle and has had worse performance even though the CEL is still off. I'm gonna go ahead and install the new sensor after watching this video. Thank you.

[@nosajsamaniego4512]

Was ur issue fixed???

[@JCno28]

@@nosajsamaniego4512 Yes. No more shaking, performance restored and no CEL. I recommend checking ebay for an affordable O2 sensor before going to Autozone or somewhere similar. Just make sure you know exactly what type of sensor you need.

[@nosajsamaniego4512]

@@JCno28 Sweeeeeeeet; Okay, thanks for the encouragement;

[@jamesredfield7548]

thank you. Just ordered two O2 sensors for my Geo tracker after watching this video.

[@Trash2TreasuresOFL]

How'd things go?

[@donjames5761]

after watching this. i replace my o2 sensors it fix my problem. my truck is now feeling like a truck should. the mechanic i took it spent 4 hours then told me i needed an overhaul on the engine.

[@derekfox4348]

100% helped!! Breaks it down and explains in realistic words. Have all those symptoms!

[@BLACKNIGHTKNIGHT]

Straight to the point and my vehicle is having all the symptoms. You'd think it would be a clogged fuel filter or failing fuel pump from losing power, hesitation, High RPM rev limits and transmission shifting issues. I do have the CEL on and it is the Bank 1, Sensor 1 Upstream. Going to chang it out today in Hope's it will resolve all the issues it's having. Amazing how one little sensor can reck havoc on your engine...

[@mosebiks4048]

Please tell us if it really worked

[@arhamkhattakk]

did it work?

[@t_boi3300]

Hello I have an 01 Buick Regal 3800 supercharger my car is also have the same symptoms. I’ve replaced my battery, an starter. radiator does have a slow leak! Any ideas? What could possibly be going on?

[@WindyCityCollectibles]

Did it work?

[@alexxcendejas967]

Did it work

[@johnnawatson486]

Dude, thank you, thank you from the bottom of my heart, for speaking slowly and concisely. That makes such a huge difference for me, and for many people. Not a single “umm,” or “like,” or “y’know whaddamean?” Great vid, please keep them coming! Ps your voice reminds me of a less cali-valley-girl version of Dylan aka ‘chills’, from KZbin. Great job!❤❤❤

[@chadmanning9967]

I knew this, but your delivery is gold!

[@easyautofix]

Your comment is gold, thank you

[@daniwill4076]

Thank you this is exactly what is wrong with my car. YOU SAVED ME MONEY 🎉

[@StitchDGlitch]

You just gave me a whole new perspective here, no codes but idles rough at stop lights like a misfire! This option of replacement is cheaper than a set of 8 fuel injectors! Gonna give the test a try!

[@StitchDGlitch]

@Jay Yoyo still having the rough idle with no code.. updated both valve covers, plugs, wires, coils, intake manifold, map sensor, cleaned MAF sensor.. so I don’t know. I have 4 o2 sensors which are all reading within specs so I’m at a loss.. I may have to get it to a shop for a more detailed scan.

[@StitchDGlitch]

@Jay Yoyo I checked all injectors when I changed the intake manifold, I don’t have any loss of power. This truck does have a fuel control module so I’m thinking it could be that.

[@StitchDGlitch]

@Jay Yoyo it’s not consuming any oil since I updated the valve covers.

[@mexicaG933]

@@StitchDGlitch did you fix the problem bro?

[@StitchDGlitch]

@@mexicaG933 my situation is weird, o2 sensors are good. Got a lean code so that’s usually a vacuum leak. I still get random misfires.. I think I just need to buy new coils, I went cheap on those. Still trying to figure it out, but it’s running better with the upgrades I’ve done.

[@markmartin3152]

Thanks man. We all need tips for our vehicles to run better. Everyone should have an incentive for better gas mileage, lol

[@UchennaPeter-r3s]

5 star video. No unnecessary talk

[@yuusenshi]

i have had all these symptoms with no engine light for a while now & boom yesterday finally throws a code, what is it? “too rich”, “upstream o2 sensor” wish i found this video earlier but great video simple and easy to understand!

[@tskorka1000]

Thank you sir, might be the reason for my motorcycle running rich.. Well done video!

[@easyautofix]

Thank you!

[@snipertv2755]

Best explanation of O2 sensor

[@martianboy9886]

My Nissan Frontier experienced rough idling, would jerk when I accelerated, engine light enabled, and would stop on me as I'm driving. Changing the O2 sensor fixed it though

[@easyautofix]

Thank you for sharing!

[@hazelpieterse853]

Hi so it wa she sensor My car same problm was thinking it c be the fuelpump.sometimes it start sometimes not .so just want to know coz to change fuelpump is a lot of money

[@martianboy9886]

@@hazelpieterse853 in my case it was definitely the O2 sensor. Before changing the O2 sensor, I changed 5 other sensors, but replacing them didn't fix anything. It wasn't until I replaced the O2 sensor that I could finally drive my truck without any of the symptoms described.

[@hazelpieterse853]

@@martianboy9886 thank you for reply.i think my husband must first go for the sensor .he wa thinking the fuelpump .but.now he can go first for sensor

[@adeptv9736]

Dawg that shit happened to me today

[@twinbee4243]

I don't clean mine, I replace them! And I don't follow the 100,000 miles rule. I follow my own instinct. I change mine every 45K to 60K miles depends on how I abused my work truck in a daily basis. I replace 2 of them because my work truck only have 1 catalytic converter so there's 2 of them 1 for upstream and 1 for downstream. I always putting brand new OEM Genuine parts from Nissan, oxygen sensor. After I replace them, I'm also cleaning up the throttle body, MAF Sensor too, and the Air Filter as well since I got Volant Cold air intake on my Nissan Frontier truck. And after all that I'm gonna check all the 6 Spark plugs, if they're still in good condition then I'll leave it there, but If one of them is messed up then I'll be replacing all 6 Spark plugs. So I'm all done replacing the Oxygen Sensor, also checked and or replaced sparkplugs, cleaned/inspected the Throttle body and MAF sensor, then I'll be checking the Fan Belt check/inspect and or replace If necessary. And the other components and parts like water pump, pulley, Fuel Injectors, Transmission Gear box gear oil change, Clutch, Differential Fluid Change, Radiator Coolant check or change, Radiator check/Inspection/ and or Replacement if necessary and so on and so on will be follow up in the next maintenance schedule. this is how I conduct my preventive maintenance on all of my vehicles that's why my 2010 Nissan Frontier Nismo 4.0L V6 (VQ-40) Turbocharged 6 Speed Manual transmission truck is now at 713K miles. Still going strong and still have tons of power and torque.

[@sickntwisted3517]

This guys voice kinda reminds me of the guy in new york that has the store were he makes sanwitches the ock way lmao shure shure neva neva lmao

[@676dawg6]

No cap lol shore shore hahahaha

[@KillaFA5]

Next we put the o2 sensa on tha grilllll

[@herb7026]

😂

[@noitankur]

lmaoooo

[@jeremyweldy8324]

🤣🤣🤣🤣 yesss

[@truesonofliberty3267]

Thank you Vinnie Barbarino! Excellent video!

[@IronMayne]

Gotta say, easy explanation for sure. I have a 2013 Taurus and got issues with this but not sure if it’s the cat converter like dealer was saying

[@ivancavalcanteusa]

That was a master pro explanation to us that are not mechanics , thank you very much.

[@ngfish2551]

Nice man just what is happening to my truck keep it up doing that great work

[@dhgswiftkiller4581]

Do you think a faulty O2 sensor can make my RPM be jumping slightly up and down as I'm on cruise controll at low speeds? It also shakes while accelerating only, not while coasting.

[@aic20]

I'm currently in this boat. I think I'm going to just replace the sensor to see if it fixes it and I can report back what happens.. Did you find anything out?

[@darla7614]

@@aic20Same here. Did that help?

[@derektierney1314]

Nicely done ✌️😁 As my car, I think has this problem I'll try that unplugging the sensor, Tks.

[@jeffersonsteiner3965]

The Sensai of auto sensors is back! Outstanding info.

[@easyautofix]

Too nice, thank you!

[@ryproar11]

Well I got more I fo out of this than anything my mechanic told me. My CEL came on but went off with new IAT sensor but it still surges, idles rough in gear only, and strong smelling exhaust. Then poor gas milage and stalling at stops in gear. Every single symptom I have is here. I am replacing it asap. Thanks for the vid it helped out a huge amount.

[@aidanthompson6947]

Did it help?

[@wadesaleeby2172]

Thanks Pal! Gonna change it out now in my 2013 Beetle Tubo. Getting horrible gas mileage...106,000 miles. Just had a tune up and required maintenance, new tires, front end aligned and still poor mileage.

[@lafter7723]

Thank you for your video very, very HELPFUL. KEEP THESE VIDEOS COMING... 👍

[@HypnotizeTheMasses]

Yes you are absolutely great. Some other video was 2 minutes long an then first minute was a waste! I couldn’t

[@stayslifted]

Everything you said is exactly what my cars is doing is crazy

[@caldwell2253]

In some situations faulty o2 sensors can cause trouble in shifting...have you experienced this as well?

[@salvadorrenteria4528]

Yes

[@TheWopper78]

You and Chris Fix are my GO-TO for things an car owner can do from home. You are great!! You bet your azz i sub’d brother!! Thx again for all the work you put in to help us out

[@mikeyh7221]

excellent video! my truck had all of those symptoms, thank you.

[@easyautofix]

Awesome! Thank you.

[@Trash2TreasuresOFL]

Wow, you andwered many wuestions. God bless you! Please keep up these videos. :)

[@Scion1502]

Thank You for explaning this so easy this video is very very helpful 😁👍

[@israelight393]

Thank you papi your the man 😊

[@tyrel6732]

Watch this on 1.5x speed

[@0xx3]

Thanks

[@StumpyTr4p]

How lmao

[@yolandacoleman3264]

Although I wont be the one changing the sensor but it was helpful to know where to locate it and understand how it affects the car....

[@RonTimmonsM1]

Great job on the video very informative

[@fifthhorseman1632]

Been waiting for friend to bring over a meter to change mine for sure but after that bit bout the idling I'm convinced that's my issue so thanks man. I been an industrial mechanic my whole life so I can fix anything even on a car I just can't diagnose anything that's not a machine the size of our house lol

[@mohamadaimal3955]

Hi from Afghanistan. Really nice information. 🎉

[@junesayan8896]

My mazda 3 always stumble while accelerating I will try this hope this will work I already replaced PCV and still the problem stayed..

[@gooimanilow111]

I Have all these symptoms. All 3 tractions control lights came on tonight too. I’m gonna change all O2 sensors and see if it changes anything.

[@scales57]

Wow. This is really informative. Thanks!

[@easyautofix]

Very kind, thank you!

[@rubber-duck]

I've got a '00 Blazer, been replacing sensors here lately I've replaced the cps,tps, with 184k miles with poorer gas mileage as usual the oxygen sensor should be next thanks for info. 😁

[@chevydecker1819]

You're a life saver, thank you!

[@easyautofix]

and thank you!

[@Engineerboy100]

Good job on the video, thanks for posting.

[@easyautofix]

Very nice, thank you for watching!

[@villapinstriping]

Wow..i didn't know you could unplug them and see if it runs better.. Like the MAF.. ive done that trick anfew times with other cars. Gonna try it with my Saturn SL2

[@nia6849]

After replacing 02 sensors on sensor 2 on my vehicle, the engine light was solved. Thank for the video.

[@easyautofix]

Awesome!

[@hazelpieterse853]

What was wrong with you car

[@nia6849]

@@hazelpieterse853 : The scanner indicated code "P0136 oxygen sensor circuit Bank 1 Sensor 2" After replacing 02 sensor 2 which located downstream. Then the engine light no longer turned on. I will update in the near future should the engine light turn again.

[@hazelpieterse853]

@@nia6849 ok thank you for reply so it was oxyen sensor that you replace

[@hazelpieterse853]

@@nia6849 hi one last thing I want to knw is ...what was the sympt on you car.coz our car is stalling sometimes or sometimes it start sometimnes not .

[@pebblesadams1744]

The unplugging to check and info of open loop default helped me so much 👌other videos don’t even bother to mention that and I been trying to figure that out if it was a way to diagnose thx a bunch your the best

[@easyautofix]

Glad it helped!

[@trutrojanadventureswithque3489]

What is a good bank2 oxygen sensor for 2011 Nissan Maxima

[@AChavez-p5k]

Verygood

[@easyautofix]

Thank you!

[@TheBelse]

Well explained ..thank you.

[@dannyingamells6642]

Hi Easy Auto: one of the things I enjoy hearing is the way you say "today's video is about "symptoms of a bad 02 sensor" the way you narrate other videos. It's kind like some kinda child narrator. I want you to know I really appreciate the trouble shooting tip regarding unplugging the 02 sensor to troubleshoot. Since I have 2 sensors only on each side of the exhaust manifold, it should be relatively easy to troubleshoot. This tip will save me $$ in the long run because it's possible I do not need a new MAP sensor. I bought two new )2 sensors but the cost to put 'em on and the fact they could be stuck in the manifold scares me. Thanks, tho for the great tip.

[@rhcpfan1992]

This was a real good video, thank you

[@bklynslipnjimmy]

Great information and presentation!

[@easyautofix]

Very nice, thank you!

[@EGMATV1]

Thanks for the easy explanations !!!

[@easyautofix]

THANK YOU!

[@EGMATV1]

@@easyautofix U r Welcome

[@raymondmoreno7442]

Great video helpful 👍

[@robertwilliams5019]

Thanks fam I think that the problem I'll let you know if so peace ✌🏿 from Las Vegas

[@seekingsoultribe]

Could this be responsible for an rpm drop on a cvt from 1500 to 1000 accompanied by a low rumble sound while ascending a hill? No check engine light on and this is the only issue. The rpm drop only lasts for 1-2 seconds then ascends normally

[@oscarramirez1065]

Very good to learn thanks very much

[@damonwayne3307]

I did unplug my upstream and ran 50% better it would start easier but idle up and down sometimes stalling. Plug it in hard to start and would stall easier. plus fuel smelling emissions out the tail pipe.

[@crystalg2787]

Wow, your so smart makes sense. Thank you ❤

[@AMS_KustomDipz]

I had a faulty oxygen sensor and MAF both do the same kinda job I think!

[@WaqarAhmed-qg6ur]

I have a lancer 2006 model. It's a 1.3 L engine with 1 oxygen sensor. I don't get the check engine light but I have to following issues. 1. Low mileage, 7.5 kmpl ☹️ 2. Rough / heavy idle when cold start (4-500rpm) then gets a bit better when the engine gets warmer (7-800rpm). 3. When I accelerate at cold start, the engine hesitates & rpm rises with a delay & sometimes with a very light miss fire. (New plugs + coils temporarily solved this problem but it came back after a few days of driving). 4. I have to constantly clean my MAP sensor + air filter + throttle body with a throttle cleaner spray after every 1000-1500km or else the car starts to behave more sluggish. 5. I even got my engine completely overhauled recently with new pistons, valves, rings, coils etc although the sensors have not been changed. 6. I can smell unburnt fuel from the exhaust & it indicates that the car is running rich. It even starts to hurt my eyes I get close to the exhaust. Kindly advise as to what to check & what can be the possible issue. Thanks.

[@gregvetter5070]

Outstanding explanation. Learning is fun. Thank you!

[@easyautofix]

Awesome, thank you!

[@1lionyouth]

I'm extremely thankful for the explanation but truly pissed that I've just realized that I spend my hard earned money in various car shops but never got a clear detailed explanation like this before.

[@jasonmariani1258]

He’s a damn good KZbinr and his straight and to the point helpful info is why I subd

[@Vibracanaltv]

Good video!. Buen video!.

[@cookingwithkratos]

Thanks for the great explanation man. I like this kind of channel.

[@mendezmendez5559]

I like the way you explain

[@duanecarr6712]

Thank you

[@FairylandAdventures2024]

Thanks for the clear explanation. Does a bad oxygen sensor trigger all the symptoms you mentioned simultaneously?

[@dopeboyp3487]

Not necessarily. Which is why he said for instance: The 02 Sensors could be bad without a check engine light. Hope this helps!

[@FairylandAdventures2024]

@@dopeboyp3487 Thanks.

[@dopeboyp3487]

@@FairylandAdventures2024 You’re welcome!

[@ChrisGreen-v7h]

You are amazing lifesaver

[@JohnWhite-zt5gb]

Great job

[@lilgum828]

the 02 sensor code came up when i scanned my car and it said it needed to be replaced. my car has been turning off whenever i put gas in it and it doesn’t start the first time but the second time it barely starts and i gotta gibe it a little gas for it to start, and my car has also been shaking and wasting more gas could that be the problem? i have a 2007 audi a4

[@paulwyland2926]

Man I have been dealing with this PO420 code. I have had my catalytic converter replaced 2 times and did a cleaning many times but still keeps coming back on. I guess the last thing to check is the O2 sensors even though people say it’s not always them.

[@Alexjussme]

did it work.... if not try your evap purge valve or gas cap

[@Alexjussme]

does your car turn off in cold start at idle

[@TheDexa88]

Close to the end of the video you had white smoke coming from the tailpipe. Is that also sign that O2 is bad? My car at startup gets that first smoke more then usual, but it stops soon after. I know its not condensation.

[@danukadanuka3753]

Thank you very much brother 👍

[@tvue2322]

Great video. I just got mine replaced yesterday bc my engine light came on.

[@misteegraham4172]

Was it expensive?

[@doranmaxwell1755]

I have a LS conversion in a 74 Chevy truck I don't have cats but do have one sensor in each exhaust side. will all you said still apply?

[@strattuner]

i first went to school on electonic cars in 1980,when gm introduced the feedback carburetors which everyone knows were a bandaid,these carbs were a joke,one thing that wasnt' funny was they told us in school to replace the o2 sensor every 35000 miles,they also told us that this one sensor is responsible for gas economy mainly,it and the CTS coolant sensor,if either of these sensors is out of range,what fuel economy,been to many schools since then,but plugged, dirty, defective injectors will throw same codes,replace them every 3 to four years for max economy,plugs too,oil changes means there won't be expensive engine parts going away,parts don't wear in clean oil,fact

[@junmiles8887]

thank you for the tips ,very helpful.

[@Runswithwolves6323]

Good video..thanks!

[@papo862]

Great video informative 👍🏼 Car has lean codes but my oxygen sensor aren't ready yet, could the not ready be the reason?