Syncro4 UPGRADED!... 1900kv motor on 6s🤯

The second best think about RCs is making them go faster, the best think is MAKING THEM FASTER🤣
Team Corally Syncro4 gets its first real power upgrade!
6s POWER!
Surpass 3674 1900kv motor
nl.aliexpress....
Team Corally Torox 185 esc
www.campbellto...
Rear hubs (wide)
www.campbellto...
Rear axles (wide)
www.campbellto...
Front steering block (wide)
www.campbellto...
Front CVD driveshaft COMPLETE
I could not find the front CVD axles without the dogbone
www.campbellto...
Dementor front bumper/skid
www.campbellto...
Dementor rear bumper/skid
www.campbellto...
Sway bar & hinge pin set
jennysrc.com/p...
Spektrum 3668 2400kv motor
www.spektrumrc...
First look and test
• STUNNING NEW 1/8 buggy...
Syncro4: • Syncro4
Some of my other RCs you may want to check out here👇
Quad Motor VRX
• The Evolution of RC ca...
Kraton 6s EXB: • Kraton 6s EXB
Arrma 1/8 Krayon 4s: • Arrma 1/8 Krayon 4s
Mojave 4s BLX: • Mojave 4s BLX
HPI Vorza S 6s: • HPI Vorza S 6s
Arrma Grom: • Arrma Grom
RC Boats: • RC Boats
WLToys speedruns!: • WLToys speedruns!
All of my DIY carbon, aluminium or polycarbonate parts are cut with a jigsaw and drilled with a hand drill.
Most of my materials like Carbon Fibre, Aluminium, polycarbonate and hardware like screws, bolts and nuts are purchased from Ebay Australia but most of what I use is easily found just by Google searching the material or hardware you require.
Music made on the GroovePad phone app.
All editing done on my phone using the Kinemaster phone app.
Email
[e-mail]
Facebook
/ rc-crazy-110316407770980

[@monkeytrident]

Vroooooooom go go Saul !

[@scaleworksRC]

Sweet! Built like a tank now 🦾

[@Hungrybird474]

Awesome .

[@rcsendandblast1579]

What a STAR you are Brother 👊😎 Keep doing what you love and everything always falls into place 🤩💪👍👍🙏

[@bella0167]

👍

[@DozersRCPlay-vf4pd]

Great video brother 👍

[@JIPPERR_1]

80kph is real good in my books. Fast and not too much Temps, perfect 👌

[@rccrazy]

Agreed👌 It has heaps more punch and air control now and they were the main things I was after not really top speed so I'm stoked😁 We'll go faster soon😅

[@propgear123]

Ripping ❤❤❤

[@MechanicallyFun]

Loving this corally, great vid mate👍🏼

[@rccrazy]

Thanks mate!

[@timallen6035]

Good video. That buggy sure seemed to liven up on 6S. Still plenty tough to handle the extra power.

[@rccrazy]

Yeah it's not that much faster but so much more punch and air control than a 4s set-up👌 Thanks Tim

[@Mick_Au]

Man tough as nails mate like you I was expecting something to break. What was the chopper buzzing around Police? 🙃

[@rccrazy]

Yeah I definitely wasn't trying to break it but some of the crashes it took would've easily damaged other 1/8 rigs, well and truly surprised! And honestly I didn't really notice the chopper😅 Most likely the Police though yep.

[@Mick_Au]

@@rccrazy Lol all good I notice little details it's a OCD thing lol Cheers matey

[@troyavery6889]

Hey there Mr.Crazy,not sure how else I can chat with you. But we talked for a few minutes,a little while back,about the Mojave 4s. If get a chance or the time,hit me back. I wanted to pick your brain some more. Thanks! Troy

[@rccrazy]

Hey mate, how did we chat the first time? Normally I chat privately through Messenger, email is slow because I don't often check it. But I'm happy for you to contact me either way👍

[@troyavery6889]

@@rccrazy this was where we were chatting, are under the same title on messenger?

[@rccrazy]

@troyavery6889 yeah I have a RC Crazy profile👌

[@troyavery6889]

@@rccrazy well I couldn’t find your profile on Facebook,so I’ll just ask your opinion about the 4s Mojave,I’m using 2-2s 7200 mah,120c batteries and wondering what you think is a good LVC? My run time is around 20-25 minutes depending on what I’m doing. You had mentioned before that the short run time could be because of the LVC. Thanks in advance! Troy

[@rccrazy]

@troyavery6889 ok that's strange🤔 Anyway I normally set my LVC to 3.3v per cell because they will sag lower than that when getting close to fully depleted cells, when you actually stop and unplug it should climb back upto around 3.3-3.4v. Run time definitely varies from person to person and depending on set-ups, honesty 20-25mins is heaps in comparison to my run times😅

[@gillian9178]

I dont think its worth doing, the stock electrics on 4s with 17t pinion gets 50-51 mph. I think its better putting the money the Syncro & the upraded motor & esc cost straight into a 6s Spark, that has better/more powerfull electics & better radio.That easily gets 70+ mph on 6s with simple pinion upgrade. Different if you already have a Syncro & spare upgrade motor & esc laying around I guess.

[@rccrazy]

Yeah I don't have a Spark or the upgrades

[@germanopinheiromartins4547]

1900 is low, is for truggies. Put 2200

[@rccrazy]

It's all I had