System Test 12

[@skylarjohnson9054]

All of those Honeywell fire alarms a.i System test 5 and systems test 9 and systems test 23 and the video that I was watching without a strobe

[@american0153]

3:07 musical horns!

[@HiSmartAlarms]

You always have the rarest alarms.

[@officalfrogstudos]

I love code tree because it beeps 3 times then silence

[@tanushkapankar184]

SYSTEM TEST 12: WARNING! FROSTEDSTROBES 🔥🔥🔥

[@RaccoonAlarmsVosgra]

I have a 9838 also the black lamps in the basement I used to have one

[@piktureit]

That 34t-24 without the strobe is my favorite alarm!

[@pennyackley152]

I disagree.

[@mrwtuber1217]

​@@pennyackley152BOO! did I scare ya?

[@AadiPendse]

Why was the Radionics AS (Wheelock AS) not in sync with the other alarms and not on the same code? Plz reply.

[@FrostedStrobes]

Even when set to continuous there's a slight delay before the device sounds (if I had to guess, I'd say this is for syncing the strobe), I set it to Code 3 just because it's less annoying.

[@AadiPendse]

FrostedStrobes Now I see it is on the Strobe Circuit instead of the horn Circuit

[@kaitjonesmusic]

If it was on the strobe circuit, but there was no audible silence than the alarm when the strobe circuit wouldn’t sound anymore

[@sirenfreak57]

I might be getting one of those soon and a rare Cerberus Pyrotronics horn strobe and possibly a Standard 77 pull station...hehe.

[@FrostedStrobes]

What's the model of the pyrotronics alarm?

[@sirenfreak57]

FrostedStrobes MC-S17-S

[@sirenfreak57]

And I meant to say Standard Electric Time 700 pull station...we'll see bc I don't have a key

[@sirenfreak57]

I ended up getting a 4W-B instead...sneak peek...

[@sirenfreak57]

Hooray for the 9838s! Did you get the dome light from eBay?

[@FrostedStrobes]

Yes

[@mrwtuber1217]

Yesssss!

[@ogre071]

The Pull You Just Replaced Was The MSI-10B Or Should I Say MS51

[@maiyo8518]

OMG all your family is here in your house and you had a system test did your family was at you? Did your family hear it

[@odinkvenvolden8218]

That's a Wheelock AS rebranded by Redionics.

[@KA6ADE]

do the simplex 2901-9838 on contunus and the true alert on code 3 and the 4051 or 4051 and a old simplex smoke decter and heat decter

[@DerpyFireAlarms]

Cool! I got an Edwards 270-SPO for Christmas!

[@FrostedStrobes]

Cool!

[@mrflfanguy2007]

Nice system

[@MINIONMATTHEW]

Nice 🙂👍🏻

[@faceofapurpleturtle4408]

Wait.. On top of one of the alarms, I see a smoke detector misplaced.

[@FrostedStrobes]

Yeah, I put it up there a while back. It does work though.

[@sirenfreak57]

Awesome!

[@firesafetyclass2903]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@skylarjohnson9054]

I found the 7002t without a strobe

[@trainerred2063]

I'll scrap my old request for 13 and do a a new one: Notifier bng-1 by the panel, keep the Faraday light. Simplex 2901-9838+2903 (light on bottom) Keep the 4251 by the door CP HDC-24C on the Simplex 4050-80 in place of the radionics. Siemens MSI below. Wheelock bell in place of the 9838

[@sirenfreak57]

trainerred206 I already called the bell strobe

[@FrostedStrobes]

I'll do this, but I might switch some things up because: A. The BNG would shake the panel a little more than I'd like (see system test 6, about 4:33 in) B. The bell is quite heavy and I wouldn't want it facing downward on that flimsy board (plus if it fell it would fall in the litter box, and that would be a bad situation for everyone).

[@trainerred2063]

FrostedStrobes ok then put an MTL instead of the bell set to horn and the century by the panel