My hammer broke and I ordered the CowCow hammer set. The fire pin broke the next day. Thanks to your video, I am now also ordering the auto sear.
@GHOSTRACING-b5j Жыл бұрын
Hi my aap-01 is stuck on full auto and I have the cow cow hammer set
@DiegoM3752 жыл бұрын
dude, you always clear all my questions about the internals for the aap01 xD. THNX!
@Wyhaq2 жыл бұрын
No problem, happy to help!
@JBAIRSOFTIRELAND2 жыл бұрын
Good video. But I don't understand why you pull all the safety and trigger out just to pull out the hammer cage. I just remove the two back pins then pull the trigger and the cage pop's up.and out.
@kurtmesser6805 Жыл бұрын
I just take out the back 2 pins and pull the trigger and wiggle the trigger until to get it out it always works
@dthompsont3796 Жыл бұрын
How often does the auto sear break on these. I have upgraded the hammerset and am getting the fire pin lock as well.
@KniteGraffiti Жыл бұрын
my aap01 sometimes burst fires in single fire generally when its near the end of the mag. do you think I need a new firing pin lock or auto sear? relevant upgrades: cowcow lightweight bbu, waldo recoil + nozzle spring
@dewinterjo Жыл бұрын
Amazing video, but for me, it was a lot easier to put the weird looking spring together with the front thing instead of after it. But it worked :) thanks a lot ✌🏼
@milomonbaliu1491 Жыл бұрын
You helped me fix my gun (again). Thanks alot !😊
@fnkhrs4 ай бұрын
What happen if we not put auto sear ? Will the gun have full auto mod or will have single mode only ?
@beingre_bornbrb2 жыл бұрын
Tried this same auto sear but wt stock hammer assembly, didn't work
@albertwidiantoify2 жыл бұрын
where did you get blue colour upper receiver , outer barrel and blue accessories from? coz NARCOS AIRSOFT for aap01 different blue colour
@Anrathis Жыл бұрын
great video. thank you!
@BayVFX2 жыл бұрын
if i get the cowcow hammer set should i put in the steel rotor too?
@hebuggin3599 Жыл бұрын
ay man what tools are u using, id love to snag them
@brethart8094 Жыл бұрын
Where can a get the stainless steel fire pin lock? Please let me know
@matthiasmcdevitt17752 жыл бұрын
Do you know if the auto sear will only work with aftermarket hammer? Something broke in my hammer assembly and oddly enough it was the auto sear, nothing else.
@Wyhaq2 жыл бұрын
I believe it needs the rest of the hammer set.
@matthiasmcdevitt17752 жыл бұрын
@@Wyhaq thanks for the reply and the videos, they've helped me a lot!
@TreyyDaMenaceFan2 жыл бұрын
Do those C-more protectors protect the lens or do u still need a lens protector?
@Wyhaq2 жыл бұрын
How the pistol is set up in this video, the lense could easily get shot out
@jameswhite8831 Жыл бұрын
You didnt need to file anything off the auto sear?
@amalfiborro16142 жыл бұрын
Where did you get them
@ShipolasFPS2 жыл бұрын
my guy where did you get those blue parts-? specifically the trigger and mag release
@Wyhaq2 жыл бұрын
Oregon airsoft arena. In store purchases only
@LenSmedts Жыл бұрын
What does the fire pin lock spring actually do? I lost mine but my aap01 still shoots
@arthurlirafilho6678 Жыл бұрын
Same, no idea on what it does
@jaythomas2622 жыл бұрын
Where did you get the blue trigger I can’t find them at all
@Wyhaq2 жыл бұрын
Oregon airsoft
@LCairsoft140 Жыл бұрын
can you do thumb rest install
@Wyhaq Жыл бұрын
yes, idk how I missed that one
@LCairsoft140 Жыл бұрын
thanks so much im planning on buying one
@mikesullivan5851 Жыл бұрын
What's the main benefit of these parts
@Wyhaq Жыл бұрын
durability and reliability
@taoloz2 жыл бұрын
where did you get that DBZ grip from?
@Wyhaq2 жыл бұрын
abunaisupply.com
@nickvandersanden41332 жыл бұрын
What does the fire pin do exactly? When i take it off it still works fine 😅 but for some reason when i put it back in it double fires still..
@Wyhaq2 жыл бұрын
Do you mean the fire pin lock?
@nickvandersanden41332 жыл бұрын
@@Wyhaq jeah the little pin with the spring on the left side of the hammer assembly looking down the gun 😊
@Wyhaq2 жыл бұрын
@@nickvandersanden4133 that is the fire pin lock, It does exactly what it sounds like. It locks the fire pin in the cocked position after each shot and prevents all misfires. You are likely having an issue with it somewhere. Either it's broken, or it doesn't fit in it's spot correctly, or it's worn out. Is it an upgrade part or a stock part?
@nickvandersanden41332 жыл бұрын
@@Wyhaq bought a new one because the old one made it double fire with one trigger pull. (Commented on other vid ;)) The new one doenst seem to fit for some reason.. it doesnt move as free as the old one so the spring doesnt push it up all the way
@nickvandersanden41332 жыл бұрын
Its a cow cow one btw
@theonlyonegrimey2 жыл бұрын
Where can i find those anime grips
@Wyhaq2 жыл бұрын
www.abunaisupply.com/
@James_Maguire Жыл бұрын
What was the secret upgrade ?
@Wyhaq Жыл бұрын
Firepin lock and auto sear
@James_Maguire Жыл бұрын
@@Wyhaq sorry I guess I'm in too many forums. Thought that was common knowledge
@Wyhaq Жыл бұрын
@@James_Maguire these parts are not advertised as being compatible with aap-01, and a large amount of people are unaware that you can upgrade these parts. At the time this was filmed and posted; googling for aap01 fire pin lock etc yielded no results.
@jonnygonzalez84452 жыл бұрын
Aye man quick question, my AAP-01 blow back thingy doesn’t rack properly. It gets stuck and doesn’t fully go back in any idea what’s wrong with it?
@jonnygonzalez84452 жыл бұрын
Any way I can get your snap to show you my issue?
@thetoxxicduck78702 жыл бұрын
have you tried lubing it up if im thinking of what it is then that would help
@Wyhaq2 жыл бұрын
It is very likely that your piston head is dry or warped.
@jonnygonzalez84452 жыл бұрын
Um I’ll try to lube it, any recommendations to where I can get lube from?