The Best Hop Up Unit for the Action Army AAP-01 (Hadron Airsoft Loki)

[@DazedPhasesofLazerbeams]

Another tutorial of yours followed and another successful install. I would love to see what you would do about an extended barrel tracer setup. Thanks again for the vids!

[@scopex2749]

NICE just bought the basic pistol fitting a load of upgrades to make this my new primary.

[@zammas3782]

any updates bro ? im looking to make it my primary too

[@Likeaworm]

This hop up makes it accurate like a sx303 lol

[@dudearlo]

Just bought one :D Been on the look out for this for a bit 😅

[@DMC619]

Hard choosing between this and the stalker kit with everything in it..

[@MAJmufin]

pre installed kit should have warranty from them. this probably is at own risk.

[@asmrbear1057]

have you please a link from Inner Barrel?

[@oscarpicazo5367]

some great content ever since I got the aap I'm definitely gonna use your vids to guide me. just wondering what size or if possible link to the maple leaf barrel I'm still new to all this.

[@nickrobinson706]

i only saw at the very end the HPA bit out of the bottom, please please tell me more about that, i have a huge mag adaptor thingy to make mine go and i want what you have there

[@Jaeger-Precision]

There is a full video already on the channel for you 😁

[@tacticaindonesia8140]

Thank you for sharing, lad.. 🙏🏻

[@FreddieShapter]

where did you get your screwdriver from, also great video

[@SupeS19811981]

Just curious what is the precision driver you use? Looks really good quality and all the ones I have looked at/used end up being pretty bad. Need to get a new one and this one intrigues me. Cheers for any assistance 👍🏻

[@yallahi369]

could you send links to the tools you used, id love to buy them

[@WroobelChannel]

.

[@lswade4368]

3:32 that weighted screwdriver tho 🤤 where is it from?

[@joshweber1393]

Agreed. I would love to have something like that in my kitchen

[@crawfordwice]

4:50 boffs it! ladies and gentlemen. Youll make a fine lady dentist pal.

[@DazedPhasesofLazerbeams]

Question if you don't mind. I followed your build almost to the T and my fps is super low. Like 250 at the highest. Hadron loki, flamingo bucking, cow cow nozzle block ,guide rod, and light weight blow back unit. Maple leaf barrel CJ 131mm...I did "upgrade" my piston head to the tti one. 200% nozzle spring and 130% recoil spring. I'm going to change to probably a 150mm barrel if it'll fit in my tracer unit. Maybe that'll help some but it seems like Ive downgraded :/ Any ideas? I will say it seems like the nozzle made more of a suction fit to an old lacapa bucking. But that bucking was terrible.

[@Jaeger-Precision]

Add some hop adjustment. Your Hop rubber might not be holding the BBs correctly when loaded.

[@DazedPhasesofLazerbeams]

@@Jaeger-Precision Ill try this out. I wonder if I need to use heavier bbs. Im using the 50 degree bucking and .32g bbs. Thanks for the quick response. I literally couldn’t find anything on google.

[@Funkertruppen]

wich gas are u using... and maybe a 50degree for 0.32 maybe is too low. how many joules u have?

[@jeffbezzos9340]

possibly stupid question is this going to significantly increase fps and if so could that be above site limits

[@dthompsont3796]

A hop up unit shouldn't increase FPS. A different barrel and Bucking might. Tighter fitting bucking creates a better seal. Tighter barrel does the same thing.

[@Dudirgsioe]

Have you tried the Kraken stalker unit

[@Jaeger-Precision]

Yes. It wasn't very good. I decided not to make a video on it as I had nothing good to say about it so didn't want to promote it on the channel

[@lostranger1353]

whats the best inner barrel on the market?

[@loops01]

Great video :)

[@WroobelChannel]

I got same configuration, but still digging info on best possible inner barrel. Would You recommend something?

[@percival5771]

crazy jet inner barrel bro. ive found its got some beautiful consistency. rarely ever get any shots that dont go where im aiming (provided my hop up is adjusted)

[@JSNFKE]

Can i use a 60° in the AAP or is a 50° better?

[@hewhoowl]

idk

[@WWskeater119]

Yes, the 60 works great, the higher the hopup rubber just means the stiffer it will be.

[@andrewrodrix85]

Is that a hpa aap01?? How do you do that?? 😮

[@NYSeaNile]

Glock/aap mag adapter for m4 or mp5 mags, regulator, tank, air hose.

[@160384Stig]

@@NYSeaNileLook again, that’s not exactly what’s happening here, I think this has a permanent hose installed, I’m thinking this takes AEP mags somehow rather than M4/MP5

[@NYSeaNile]

@@160384Stig well this is the easiest and somewhat cheapest way to get an hpa aap-01. I think the whole setup minus the gun cost like $350 to fully have hpa running m4 mags for me.

[@cfrforce1]

It's probably the JV tactical infinite hpa adapter..

[@nikgrojzdek3260]

Yo Jaeger which screwdriver set is that ?

[@crawfordwice]

Temu

[@kaydenmosley538]

Can you still use a drill kit

[@danaschlund3628]

Can it fit in the fuku-2 upper without making holes?

[@mrbullfinch]

Hey, I've installed the Loki and flamingo, but not the bolt just seems to get jammed open. And idea what the problem could be? I thought I was the flamingo not sitting all the down

[@netaslive]

Try original rubber or a diff one I had same issue with a maple leaf deception rubber

[@mrbullfinch]

@Grant Langley but it's the same on two guns 🔫 . I've got exactly the same set up for my son, and both guns are doing the same. Will give it a try though, but wanted to use the flamingo because I've heard they are good

[@netaslive]

@@mrbullfinch is it catching on the new hopup itself? Some of the sharp corners may be hitting areas. Try to identify where things are hitting

[@mrbullfinch]

@Grant Langley the bolt doesn't seem to be going all the way in, almost as if the rubber isn't far enough into the barrel

[@mrbullfinch]

Will do

[@rodribap]

What is the length of barrel

[@ashir555]

Can you install this hop up unit with a mini mamba top reciver?

[@Jaeger-Precision]

Yes you can

[@mr_bacon7728]

Do you have to drill a hole

[@danaschlund3628]

Yes, he talked about it in min 0:39. 😁

[@Tiki_airsoft]

@@danaschlund3628 that’s not a Min that’s a second

[@hughjass1976]

​@@Tiki_airsoft bet you're fun at parties

[@darrensmith5296]

Has anyone used this Loki on a tti pcc carbine kit with the TDC kit on the carbine kit? Thanks

[@Otivvv]

UP

[@halequin117]

Has anyone else had any issues with BB’s getting stuck in the barrel just where the hop is? I installed rhe flamingo 50A GBB bucking and using point 3 weight BB’s and the occasional shot is sitting in the hop, just wondering if it is a “it’s new and needs wearing in” kind of thing

[@tonydiazist]

ever figured it out?

[@dthompsont3796]

A BB should always be sitting in the bucking unless you are empty. It acts as a detent to stop the balls from rolling out of the barrel.

[@MartinJHarris]

need to make... pins, screws and springs set so don't have to purchase a donor pistol... swap you a box of creme eggs ;)

[@dimeryphotography6977]

Next time you should show the link to the parts

[@bloodyshrapnel2119]

What is tge mans name tgat invented this. Id like to ask him what that little plate tgat prevents the grub screw from backing out is called for another project

[@just_bright3344]

your gun looks dry in the video i suggest lubricating it

[@panagiotismanetas3746]

maple leaf autobot is better mate.

[@mrbullfinch]

Is this better then the Action Army Wheel Adjusted Hop Up Chamber for AAP-01 Airsoft GBB

[@Jaeger-Precision]

In my personal opinion, yes.

[@mrbullfinch]

@@Jaeger-Precision ok mate nice one 👍🏼thanks for getting back to me. Great videos 👍🏼