T140E chain & sprockets part 2

[@bm7760]

Thanks, as ever and even though you're not around to hear it, for the videos and knowledge you kindly shared. Now, I'll ask the Mrs if I can borrow the wok. ;-)

[@CaptainAhab1233]

I'm 16 and working on restoring a t140e and these videos are very helpful! Thanks so much!

[@kerrinphillips9947]

+Eddie Carroll How are you going with your restore? I just bought a 1976 T140 two days ago!

[@MrGatohead]

Fantastic... this is very helpful. I'll be changing out my front sprocket on my own thanks to you. Cheers!

[@mjohnston001]

fantastic- Thanks so much for your videos. You've been a tremendous help to me! Hello from Canada.

[@markybyeah]

LOVE IT LUNMAD BRILLIANT VIDEO!! KEEP THESE COMIN AS I SAID THANKS AGAIN .

[@ianhames2465]

A very helpful video. Is it possible to get a 22 tooth sprocket through the casing aperture?

[@lunmad]

@pushur Hi pushur :-) it was not salt it was "sugar soap" it is a decorators degreaser, and I had some in the house so used it .:-D any strong detergent/ degreaser will do.

[@lunmad]

@T140Rich Thanks T140Rich :-) I'd tidied up just before I turned the camera ;-D Boiling the plates works a treat when the clutch starts sticking, give it a try sometime you will be surprised at the result. #4 vid is on the way! I think it will take one more to finish of this set.

[@lunmad]

@MrGatohead Hi mr Gatohead thank you :-) I am just about to upload the rear sprocket change and believe me the front one was easier to do ...... now that just ain't right! catch you later :-D

[@VndNvwYvvSvv]

I see you skipped removing the sprocket itself. That's the part I'm stuck on. It won't free from the chain or move backward no matter what I do

[@lunmad]

@bonmarl Hi Scot :-) sometimes these leak gear oil down the splines which is why Triumph put the Oring on the silicon is a belt and braces approach to the problem :-D

[@Silver912targa]

Hi Lunmad, To degrease the clutch plates you use boiling water, add any degreaser and...? I didn't quite understand the last ingredient. Michel Belgium

[@MrZorn88]

How the hell ,did you take out the sprocket?? I have a bonnie 1988mod,and all the stuff comes out with the old sprocket. It's too tight to get it out!! (SORRY FOR MY ENGLISH Iam from Norway) Please i need some help! ;-))

[@plymouthrock3406]

Would you recommend soaking the plates in oil after you have boiled them? If so what grade do you recommend,cheers.

[@lunmad]

Hi Plymouth :-) no you should keep the plates oil free, the oil in the primary is really only for chain lubrication. As mine is a '72 it has a shared primary so I top up the primary with 20/50 engine oil.

[@bonmarl]

hi John, What is the silicone on the sprocket splines for? Thanks, Scot

[@Erle_The_Pearl]

Why add the Salt?

[@lunmad]

@markybyeah thanks marky #3 on the way :-D