Hope you are well John. Your videos are sorely missed. You have a talent for explaining tasks while being thorough and entertaining. You're the fifth beatle in my book.
@mpv8mugambi5 жыл бұрын
Bought my first Triumph Bonnie from 1965 this spring , just wanted to thank you for all the help your videos have givin me .. Great job and keep it up :) Best regards from Mathias/ from the south of Sweden
@steveparkes15 жыл бұрын
Thanks for the mention John, you're welcome. KZbin isn't the same without you!! Keep 'em coming.
@lunmad5 жыл бұрын
Hi Steve :-) anytime there are a few more in this series.
@robertwarner81163 жыл бұрын
been "off" since '18. DAMN good to Know YOU'RE still kickin' I'm a '54 model. Keep it up old timer, helps me get by
@jtreg5 жыл бұрын
Great to see you back in business John.... keep em coming mate!
@lunmad5 жыл бұрын
Hi jtreg :-) cheers, there are a couple more in the series and I have a few daft ones I could may be upload.
@cabdriveruk5 жыл бұрын
Great video John.Thanks for the mention at the beginning. Very informative and detailed view of how the job should be done ! Cheers, Jeff.
@lunmad5 жыл бұрын
Hi Jeff :-) anytime and thank you I'm just glad to help I might not do some stuff quite by the book but it seems to do the job.
@derekcollins19725 жыл бұрын
Very happy to see you and your vids again.Helps keep me motivated.
@lunmad5 жыл бұрын
Hi Derek :-) it's good to have something to do! My Bonnie has been running great.
@motophoenix59515 жыл бұрын
Nice one lunmad. Was going to mention the self-tapper dodge, but then you mentioned it. I have adapted a little slide hammer to take a self tapper. Just screw the screw in and tap out the seal; saves the risk of damaging whatever is underneath. Thanks for the mention at the beginning. Your videos are so watchable, it is no wonder you have so many fans. Looking forward to the next. All the best.
@lunmad5 жыл бұрын
Hi Moto :-) great minds think alike :-) those BM tyre levers are just the right shape to press on the centre race without touching the bearing. It still amazes me at how many people watch a proper feather for me cap :-)
@motophoenix59515 жыл бұрын
lunmad, it is because you have such a natural way of communication. I worked as a lecturer in a college teaching apprentice technicians for 22 years until I retired. I’ve seen blokes like you in service and they were always very popular with students, which is a great talent.
@schraubnix15835 жыл бұрын
thanks for the greetings John :-) nice video again
@lunmad5 жыл бұрын
Hi Uli :-) thank you.
@kevint81285 жыл бұрын
Another great video, thanks. I had a bit of a struggle to get my gearbox sprocket off, even though the inspection hole on my '72 5 speed has triangular cuts all around, thing is they didn't quite seem to line up with the teeth!
@lunmad5 жыл бұрын
Hi Kevin :-) the std sprocket is a 19T and there is no problem fitting or removing, a 20T just to say fit through and if a 21T is used notches need to be cut in the case or the main shaft removed. I have never fancied cutting my case so would probably remove the shaft but for the type of riding I do is not worth the hassle.
@kevint81285 жыл бұрын
@@lunmad Hi John, thanks a lot. That probably explains it, sometime in the past my bike must have had a 21 tooth sprocket and had its casing cut, its got a 20 tooth now, that's why the cut outs aren't much use, Kevin
@mikejurcisek35415 жыл бұрын
Too many more Triumph vids, good to hear you're doing well ,Thank You once again, your fan, Michael J.
@lunmad5 жыл бұрын
Hi Michael :-) thank you and cheers.
@TheMitchellmitchell5 жыл бұрын
Great stuff John
@lunmad5 жыл бұрын
Hi John :-) cheers on day I might get round to the MZ.
@TheMitchellmitchell5 жыл бұрын
you should mate, there is a good mz rally in Dent in the summer (although you can turn up on anything no bother)
@farleymusclewhite4114 жыл бұрын
New subscriber here from California. Great videos, thanks a lot for making these. I just bought a '72 and am going through it so these help and I appreciate your fine work. BTW, Does that 20 tooth sprocket help much on the motorway (freeway here)? I heard that I can't put one on my TR6RV but you hear lots of things on the web. Thanks again.
@farleymusclewhite4114 жыл бұрын
Ah, OK. I see that a 20 tooth (replacing a 19 tooth) brings the RPMs down from 4613 to 4389 at 70 MPH, a decrease of 224 which is better but still too high in my book. Around here you will be run off the road for doing less than 70 on the freeway.
@charliegsings63292 жыл бұрын
Hey lunmad you still about .just want to say Cheer's for all the posts I would be lost without them.
@mikejurcisek35414 жыл бұрын
Please study vapor blasting, it will make your videos half as long & if you have light gouging or scratches use a Variety of scotch bright roloc wheels on an angled die grinder. As far as a mirror finish, use Simichrome polish, As far as not being able to clear on aluminum is incorrect. There are many clears available by the Eastwood company that offer excellent results. The whole idea of polishing is to keep air & moisture away from the surface after the polishing phase. I have used these methods for years with Excellent results.
@OtisENGINEuity5 жыл бұрын
Ha! Without context (and a shit memory that couldn't remember what I had said) that really made me embarrassed. Nice to see you are well, might need to add a bit of power to that old Bonnie to help with the added weight :P I'm not one to talk, I weigh almost as much as that old bike.. back up to 297lbs.. really hard to keep the weight off when damn near everything you do causes you pain.. I'd really like to get back down to 230, or at least 250 with some muscles.. at 6'10 that's not a bad weight.. but with my back, ankles, and knees throwing a fit when I walk it's more than hard.. Hell I can't stand for 15 minutes without my left thigh swelling up and going numb ever since I threw my back out the first time last year.. (let alone the 5+ times that followed the first) There's a guy not too far from here selling a V11 Guzzi for $2800.. I can't believe he's letting it go for so little, if it was a Triumph in that shape it'd be $6-8000 easily.. too bad I'm still not working and all the money I have from selling the Bronco is going to a new car.. well car and some parts and registration/insurance. It's time for me to finally join the 25+ mpg club when gas is $3.65/gal.. and probably soon to go up again. And people wonder why I call it Commifornia. Hope you are well.
@lunmad5 жыл бұрын
Hi Otis :-) embarrassed...why? I have always called a spade a spade, I have become a proppa fatty at 161lbs I was 130lbs for years oh well at 62 I suppose I'm allowed a bit of extra. I wish we paid $3.65 per gal we pay $1.59 per ltr that's almost $7.93 per imperial gallon. Apart from that I'm doing OK :-)
@OtisENGINEuity5 жыл бұрын
@@lunmad yeah well, blame it on the autism I guess, I'm easily embarrassed anymore. Minimum wage here is only $10.50.hr.. for those that can work. It's sad, I know I have the skills to pay the bills when it comes to welding or doing custom paint but because of my back I'm labeled a liability and unable to get a job doing the things I know and love. And I can't stand/walk long enough or lift enough weight to work retail ever again, plus that's actually one of the worst jobs you can do if you have social problems. Cost of living is expensive everywhere anymore.. unless you live in Singapore or something.. London vs Sacramento everything except for food is more expensive in London.. by 30-60% but food is 17% cheaper.. and California is mostly an agricultural state.. how stupid is that. But then you guys have WAY better internet, health coverage etc... but your taxes are INSANE!