T5 Mini precision Table Saw Unboxing

[@PRANAY119]

*Probably one of my most used **MyBest.Tools** cordless tools. Plenty of power when used with the 5.0Am Lithium Ion Batteries. Awesome cordless circular saw. Would highly recommend!*

[@sicosico2485]

*Works great **MyBest.Tools** on small lumber and much lighter than large circular saws.*

[@19dem52]

I bought one of these a couple years ago on Amazon (different brand but exactly same). There were no English instructions, just pictures (not instructional) with Japanese words. Needless to say, I was very disappointed & never used it. I too build miniatures & dollhouses and decided I would try to find some kind of instruction for putting this thing together. This video is so helpful - I think I will finally be able to use my mini table saw - Thank you!

[@HandyFrank]

yes you right same here

[@felipeninja3235]

I was skepticle of a 20 volt circular saw. But I have several B&D 20 volt batteries and the drill Works great kzbin.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . I saw the 4 stars and some glowing reviews so decided to purchase this saw. Well, leave your money in your pocket and run a cord because this little saw won't cut

[@aryareel3760]

Thanks for sharing video table saw uncle

[@THESHOMROM]

Looks like an all around winner. Thank you for introducing this.

[@futublock]

Cool the pieces are protecter with newspaper, re-cicled everywhere :3

[@CarlosAlberto-ps5uk]

Hello you can give me a link where you can buy this tool thank you a thousand

[@grzegorzwiecek7413]

Is it possible to change used blade? Where to get it? I guess it is HSS blade 63mm, could you say something more about that?

[@HandyFrank]

It’s been a long time since I’ve used it, I’m sure you can buy the blade from amazon

[@星空喵姐]

哪裡買的啊... 我也想要一台... ( 圓鋸機能斜切嗎 ? )

[@cachhomevideo1546]

Nice machine for small project.

[@MegaSamsand]

hey, two years later? is it still working well?

[@rolflappoehn1571]

Hallo eine frage, wie laut ist die Säge und ist das zu laut um in der Wohnung zu sägen?

[@imnaaier9343]

Can I get this product from Amazon

[@HandyFrank]

yes it is but I don't use it often

[@jacobbrown1690]

if you add a 4" × .027 blade you can cut frett slots in a frett board.

[@thomasd9237]

What the ??? What do you use that for, clipping your fingernails ??

[@larrywprice2]

Can you change the saw blade?....can you cut small pieces of metal, brass, aluminum, etc.

[@CountDoucheula]

I cut through some 3mm brass sheet with mine, and I wouldn't recommend it

[@johnnymataarias1479]

Where can I buy that beautiful thing please tell me

[@johnnymataarias1479]

I leave I Costa Rica

[@juliusganot1321]

hello sir....how much did you buy.....thanks

[@eagleeyes6972]

thanks for the video but the music was disturbing

[@adriennelee1520]

Thank you for your demo.. perfect for luthier work!!!

[@mbrang00]

for another $40 you could get a full size table saw from harbor freight

[@rccvs4355]

Great video, does is come with a blade that has more teeth for more precise and more smooth cuts ??

[@eduardoguerra6315]

Donde la puedo comprar?

[@TheErnestopmorales]

What were those other bits in your hand for after putting on that chuck..not that orange caliper...the other bits.?

[@muhamadnamo4961]

Very nice ❤️

[@HandyFrank]

Thank you

[@muhamadnamo4961]

@@HandyFrank you are welcome sir

[@ronpeel1878]

'Twas nostalgic to see newspaper used to wrap things.

[@rossmansell5877]

Chinese recycling!!

[@sotheabattambang364]

I really love the background music. What is the name of the background music, please?

[@TheGaryj57]

shitty shit

[@jamesback8024]

That saw blade seems like it's not good. it should cut much cleaner than that, but seems to operate fine from what i see. (Long time woodworker here)

[@josemariorivascid7575]

Donde la venden soy de Chile de la cuidad de Antofagasta y su presio

[@HandyFrank]

yes it is

[@goeiax]

Can the saw move up and down?

[@naguigorgui2635]

need more dimentions of max siz of dimeter of sender shaft

[@vitralesemplomadoytiffany5533]

Hello, how much did it cost you?

[@jedersonluizbatista6447]

Onde posso comprar os acessórios desta máquina? A minha vai vir só com a serra

[@gaets04]

Have you tried Plexiglas and or styrene ?

[@itube612]

nice set of accessories. I got similar ones with my mini lathe. Neat little table saw.

[@TheWindGinProject]

Do you think it would cut .080 inch acrylic straight and smooth and pretty quick? Thanks!

[@HandyFrank]

It’s for a smaller projects for lighter woods

[@redgeminiarts3674]

Get a cruicut! lol

[@Dancopymus]

Thanks for the review. What's the difference between this and the T4 model? Does this saw have enough precision in cutting wood?

[@amiganutt]

Buy a Dremel 4” table saw if you can find one. Still using mine.

[@jamesmoore3346]

I researched over 1-1/2year about every 'precision mini tablesaw' there was. I hunted the dremel, none to be found, The Micro Mark really impressed me. That is what I ended deciding on. It arrived November1, 2019. I cannot begin to guess how much wood I've run through that saw....a tilting-arbor,(bevel cuts up to 45°}, blade raises and lowers with the simple turn of a knurled nob thumb screw. I've cut 1/8 to 3/4 plywood and hard wood and the saw perfroms extremly well. Yeah, it is pricey, around 350.00-400.00. Another feature I like is the rip fence is self aligning and has a lock thumb screw to support the far end.....I'm sold on the Micro Mark....connot beat the accuracy....

[@luisenriquebarriosfontalvo8370]

El producto esta disponible? Hacen envío a Colombia? Que costo tiene puesto en Colombia

[@kentgray2220]

one has to love the newspaper it came wrapped in...................

[@salvocala7920]

Link ti buy

[@francisleesc]

Is this good only for ice-cream sticks?

[@PietroMaker]

Hello from italy. You have good channel.

[@jaraceballo7744]

Wer can i buy the t5 mini

[@HandyFrank]

don't buy is, now since I've been using it for the passed 2 years I'm not liking it at all

[@Bingoanshs]

awesome work sir

[@marilynwalsh1339]

Brand?

[@ulisabidah9205]

Simple... Klo BLH tw berapa harga mesin nya

[@HandyFrank]

Yes it should also you have to go slow when cuting

[@patriciahanna4123]

Need one!! Do you have vid cutting for projects? Or angles?

[@starvideoimages1]

im not too crazy about it anymore, I don't recommended

[@haderwael2987]

@@starvideoimages1 why so?

[@HandyFrank]

it came with diamond bits, I don't know why they send them with the saw

[@huntersumut]

Nice watch this Vidio. Where I can buy this one Mr?

[@lilbohbeat5785]

Mhd Yasser In both the beginning of the video and the description, it should be quite clear that this was purchased on eBay. You can probably find it on Aliexpress, or maybe amazon as well. My honest opinion on this sort of thing: google it when in doubt; it can be kind of lousy to bother someone with *this type* of question... after they’ve already made an entire video in which the answer is clear, _not to mention_ when they’ve even repeated the information already, in writing, in the description box. At _least_ check the desc box before asking, esp when the video is older.

[@smokeynewton]

It's actually rather cool. Would not mind having one myself. And the price is good for what you get.

[@darwinganaden2995]

straight cut only on plywood? it cant cut a 45° angle? thank you for your answer

[@devendrajain9786]

What is the price in India,and who is dealer

[@HandyFrank]

It works fine

[@Balramrao529]

What is the price? In amazon in India

[@katsminis]

Thank you for the vid. I'm going to buy one now for dollhouse miniatures.

[@ThisNamesNowTaken]

A random computer power adapter. Accessories wrapped in Chinese newspaper. Was this purchased from Wish? 🤨

[@heartrobber8977]

what is the role of acrylic sheet? just for safety???

[@HandyFrank]

Heart Robber hello sir, what roll

[@heartrobber8977]

Frank's Hobbies and more I mean what is use of that transparent sheet there?

[@HandyFrank]

Heart Robber yes it’s for safety.

[@rossmansell5877]

IF you have to ask then dont use a machine like this!

[@botfly7444]

Can you linked it?

[@orhuk]

Can it cut through aluminum? Like a 20mm t-slot?

[@murlakot]

Дааааа, в России мужики сами делают причем покруче станочки из под ручных материалов, а не тратят 100 баксов на хрень всякую китайскую. Ну чё тут скажешь как говорил дорогой дядя Миша Задорнов...😆. Наши поймут!👍

[@dallisolemanfamely5724]

Where can I buy it???

[@HandyFrank]

Dalli Soleman famely I got it from eBay for $99 I don’t recommended after using it for so long

[@OBOVSEM-hq2kr]

Wow! Cool

[@fernandojose1968]

Como faço pra compra uma

[@garymurphy5133]

I bet it cuts better than my proxxon table saw! I have the smaller model,not cheap and its good for cutting cheese!

[@HandyFrank]

Yes you right 😁

[@tonyanderson7854]

Hi cool video- do you think this would be helpful for building a doll house for my granddaughter? I’m thinking for cutting things like the small window frames (angles) mini floor boards etc As for the music hey not my choice but the volume control works just fine for shutting that down, some people in here should learn how to use it obviously!! Thanks Tony

[@honestgbfan5324]

Cant find replacement blades anywhere! Not buying. Looking at byrnes mini table saw atm

[@HandyFrank]

That’s true I’ll look into that as well.

[@honestgbfan5324]

@@HandyFrankthanks :) Do you still use yours? Have you liked it for its intended purpose? And if you can find the replacement blades let me know. I do like the T5 idea but i will eventually need the blade replaced. I was looking at my comment earlier and didnt mean to sound so harsh. Used to having to write a page worth of words within one limited text space lol I am still comparing prices and reviews on these mini table saw's but some are above $300 and even up to $500. The T5 rating is good based on sales etc. At least on youtube videos I have seen. So plz, if you find them someplace readily available, again, let us know : )

[@HandyFrank]

lol no worries thank you for commenting I'm here to help people, I agree for the price you can't go wrong, If I find anything I will make a video or come back and leave a comment!! thanks fo watching!

[@1shootist477]

@@honestgbfan5324 hello 🧤 ...did you buy one of these or another kind ? ...ifso how do you like it...also, i was under the impressiom these use 4" blades...is this incorrect ? Thanks 😁

[@honestgbfan5324]

@@1shootist477 Hello :) No I did not buy this one. again I could not find the replacement blades any where even now :( But, I was wandering around Harbor Freight and looked at the Mighty Mite table saw and decided to get one since it was on sale. Why not try it out I thought. Any how it worked fine for the rough cuts of 1/2 and 3/4 in square wood I needed to cut but I had to go slow as the motor was not that powerful, but it did do the job! The better blade was only $5 and helped improved cuts a lot. I had the option to return it after a good amount of "tryout" time but I am going to keep it for the rougher stuff. I am getting the Proxxon FET at the end of the month/beginning of next month as I will need much finer and more accurate cuts when I start scratch building again. To be honest I was pleasantly surprised with the Might Mite after reading so many negative things about it. First thing I noticed was that on my model there were NO open holes where fingers may slip in as I had seen on others of its style! Also there "seems" to be a safety feature that will not allow the motor to be turned on if the cutting table section is not set properly? I'm not sure if that is intentional or a glitch in mine but after I thought about it a bit I am glad it does this! Hope that helps? Watch the video "HOW TOUSE A TABLE SAW" by Dj James on my site, kzbin.info/door/fXKrI_rj3gxEGs6OaL4xzQ and you can see how I used my Mighty Mite with his method. There are also lots of reviews of mini table saws under MINI TABLE SAW in the library list of my site. Hope I answered the question and hope I helped :) Please Subscribe as I spend a lot of time looking to find all that I can to help people and put them into one site to help everybody :) HONESTGBFAN

[@abogotobhattacharyya679]

I want to purchase how can I contact

[@manuelmarras3670]

Complimenti e veramente bello 👍

[@HandyFrank]

Very good

[@ericparker7570]

I know it's meant for thin lightweight stuff but what size thickness do you think this might be able to cut to? I just bought this came think of a link from Facebook for only $28. So I'll see how well it works but was hoping it might cut up to ½" MDF. Probably have too high of hopes for this little thing. Anyway, great little video! Now I'll know how to put it together. Thanks.

[@doolinmoranphotography4461]

😂

[@GODSWORDTANDP]

how's it working now?

[@arunawickramasinghe389]

Holy crap with kinder guy.

[@felipevillordo5223]

Muy interesante nesecito el valor del aparato

[@r.m6883]

Thanks for showing.

[@kwtruckdriver]

cute lil saw thanks for the vid

[@derekwilkinson7939]

Looks dangerous to me. Why is the fence on the left of the blade? Just looks all wrong.

[@333Socks]

Ok, on eBay UK it's £65. On Amazon UK it's £219! Can somebody explain that to me, please? Thank you and a nice video, for the music I have a volume button.

[@DanielSilva-oy3ur]

Oi boa tarde como que faço pra comprar essa Bancada

[@ashfakturuk3121]

Iski kimat kya hai

[@HandyFrank]

Thank you sir

[@markjarman7819]

Can’t watch no more the music killed it

[@keithduffield5239]

Fortunately my computer has a Volume control - check yours, it probably has too.

[@GospelOfTimothy]

Nice for cutting balsa wood and ice cream sticks.

[@ZipSnipe]

can it rip a 1x2 actually 5/8 x 1 1/2 ?

[@starvideoimages1]

Hello sir yes it would cut it but you have to slide it slowly

[@kunalkiranbehera]

Make and model please. I want one

[@ramsaranbasnet6050]

धैरै धैरै धन्यवाद छ

[@ajaylovesmamatha9249]

I would i buy this can anybody send the link..

[@HandyFrank]

I got it from eBay and I won't recommended, I am not liking it at all

[@ConcasicoWoodworks]

You think this might be useful for wood frame glasses?

[@HandyFrank]

No I wouldn’t recommend it.

[@HandyFrank]

I don't know but I got it from ray for $99

[@gigeo48]

i got it at harbor freight for $39

[@1953PE]

Is the saw still good as i`m thinking of buying one

[@danieladelatierra7751]

Same here.

[@mikej9062]

No riving knife and almost zero outfeed table space make this appear more dangerous than a standard size version

[@danielch6662]

A real one would cut through your entire arm before you even figured out what was happening. This one would give you a nasty cut. But does not look like the torque is very big. Look at how he slowed down the saw with his figures n the chuck. The coarse saw tooth and the low RPM is probably what is causing the poor quality cuts.

[@HandyFrank]

I like it!

[@LoveLove-iv6kx]

มีขายที่ไหน..ราคาละครับ

[@HandyFrank]

Then you choose the music and I’ll put yours in the future videos

[@canalsenhorpe]

good

[@ПашаТкачёв-о3е]

Станочек интересный. Что меня удивила. Так это упаковка товара. Обычно (как и положено), товар упаковывают в пакетах. А здесь в газету. И даже не пожалели. Каждый комплект целая газета. В России в газеты упаковывают рыбу, когда покупаешь.

[@EliosMoonElios]

Chinese newspaper, that is a symbol of a high quality product!