Using the WASP 250 plasma film light to shoot slow motion of a table saw cutting wood. WASP 250: hivelighting.co... Chronos 1.4: www.krontech.ca/
Пікірлер: 64
@spectrHz7 жыл бұрын
How warm do dark objects get when this crazy lamp is pointed at it?
@kolby40787 жыл бұрын
SpectrHz 300 degrees
@_BangDroid_7 жыл бұрын
K?
@whatevernamegoeshere36445 жыл бұрын
Kolby said degrees, Kelvin are not degrees, they are just Kelvin :p
@NickMoore7 жыл бұрын
Interesting, I'm amazed how much sideways force can be put into the little blocks in such a short time.
@lazaglider7 жыл бұрын
Astonishing. I'm speechless.
@locouk7 жыл бұрын
Stunning!
@Zertrebender7 жыл бұрын
if I had too much money and don't have to spend 2300$ or more for my driver License in Germany I would buy one of your cam's U r one of my favourite YTbers and one of the smartest guys on KZbin please poste more Vids I ❤U
@st_us7 жыл бұрын
Zertrebender Zerty wow, 2300 for a license here in Germany, hope you did the A klasse as well cause that's too much money for the B license
@tesla5007 жыл бұрын
Thanks! I'm doing the camera and KZbin channel full time now, so I should have more time to make videos, especially once all the Kickstarter rewards have shipped..
@ShaqShalom7 жыл бұрын
thanks man, clear voice, nice commentary
@DoRC7 жыл бұрын
hey. i saw on your Kickstarter page that you're using a helicoil in the bottom tripod mount. I am a mechanic with a lot of experience with helicoils and wanted to warn you that they have a bad habit of loosening up and backing out with repeated use. i quit using them myself for that reason and i really don't know how long one will hold up in that application.
@matthiasrandomstuff22217 жыл бұрын
the saw cuts MUCH worse cutting out of the grain (like when cutting tenons). It would be interesting to see a comparison of the blade cutting with different grain directions.
@tesla5007 жыл бұрын
So cutting with the length of the wood parallel to the blade shaft? If you have any cool ideas and would like to try out one of these cameras on your channel, let me know.
@Rlindagem7 жыл бұрын
Just subscribed yesterday and today awesome vid, thanks.
@chinitopinoy17264 жыл бұрын
Wow, so cool!
@erosion017 жыл бұрын
You should do more like this. band saw, scroll saw, jig saw, and others.
@NevinWilliams717 жыл бұрын
Nifty subject, and awesome camera!
@LazerLord107 жыл бұрын
Have you filmed a metal-working lathe with that thing? I think it would be really cool to see the chips being produced in high-speed.
@dos5417 жыл бұрын
I know he has shots of a cnc milling metal
@tesla5007 жыл бұрын
I'm going to do a video (or a few) on cutting tools cutting improperly (chatter, etc), because all the slo-mo of cutters on KZbin is marketing material so it's always working perfectly.
@dos5417 жыл бұрын
A few ideas I have would be cutting and drilling with dull blades / using too much force cutting stuff
@ficolas27 жыл бұрын
LazerLord10 hey man, you gonna cut me that 1" of dust or what? :0
@lakemanson80517 жыл бұрын
wait so you make this hardware? cool man. you are a cool dude
@mc_cpu7 жыл бұрын
Great to see this technology becoming within the reach of the "common man".
@dtiydr7 жыл бұрын
Thats was cool to see.
@darrellw827 жыл бұрын
very cool
@miplates79967 жыл бұрын
Hi, what camera do you use to film your youtube series? thank you
@tesla5007 жыл бұрын
Panasonic TM700
@somethingelse2lookat5027 жыл бұрын
That's quite amazing.
@nahuelmancogote23347 жыл бұрын
Te felicito por tan buenos videos, seguí así, te admiro mucho. Mis saludos desde Argentina!
@starwarz47267 жыл бұрын
Pretty amazing!
@maxximumb7 жыл бұрын
I'm sure there is more stuff that you can cut at high speed.
@the_ALchannel7 жыл бұрын
So, you didn't solve that thing about minimum horisontal resolution being at 640 pixels? Is there any hope still?
@tesla5007 жыл бұрын
Luxima just sent me some shorter wavetables to try out, that should get down to 480, or maybe even 320 pixel width while maintaining full pixel rate.
@userPrehistoricman7 жыл бұрын
Would this make the aspect ratio more square when at max FPS?
@tesla5007 жыл бұрын
Yes
@userPrehistoricman7 жыл бұрын
Awesome!
@the_ALchannel7 жыл бұрын
So, how's that thing going?
@Spirit5327 жыл бұрын
Man, now I want that lamp for my high speed camera! Too bad it's *FOUR THOUSAND DOLLARS*. I guess I'll stick to my chinese 100W LEDs and HID lamps for cars.
@skipad43067 жыл бұрын
i was searching this chann for this camera. forgot to sub last time i been here. well got a question. if i would like to buy this cam could i get it with nikon f mount? i only own nikon lens. and if its at extra charge, how much would be. thanks
@tesla5007 жыл бұрын
You can use a Nikon to C adapter such as this: www.bhphotovideo.com/c/product/577757-REG/bower_va304_c_mount_for_nikon.html Do beware of the crop factor which is between 2.5 and 4 depending on which sensor size you compare to.
@skipad43067 жыл бұрын
tesla500 hello. thanks for the answer. well all my lens are full frame and i own 20mm 1.8. 24 1.4. 35 1.4. 50 1.4 . and etc. the smallest apperture i got is 2.8 . so even cropping i will be covvered with the widest ones . and take advantage of all my lens and of the sweet spot .but my hoby is macro . a question, adding a adapter will be more difficult to focus to longer distances ? presuming will act like a extension tube . thanks
@skipad43067 жыл бұрын
tesla500 hello. thanks for the answer. well all my lens are full frame and i own 20mm 1.8. 24 1.4. 35 1.4. 50 1.4 . and etc. the smallest apperture i got is 2.8 . im good in low light so even cropping i will be covvered with the widest ones . and take advantage of all my lens and of the sweet spot .but my hoby is macro . a question, adding a adapter will be more difficult to focus to longer distances ? presuming will act like a extension tube . thanks
@tesla5007 жыл бұрын
The adapter won't affect focus, it places the lens at the correct distance from the sensor, the same as in a normal DSLR camera. You can easily add C mount rings for macro photography as well.
@user-ls7zp1me4q7 жыл бұрын
THESE LIGHTS ARE NOT SAFE. we used one on a production, our hands got burned from the stray Microwaves they produce, also a couple guys felt sick after a few days. that's why they cannot get proper approval.
@masaharumorimoto47617 жыл бұрын
Neat! Sub'd and liked!
@RodrigoVzq7 жыл бұрын
Have you contacted the slowmo guys?
@tesla5007 жыл бұрын
I thought about that, but didn't think the camera would look too good compared side-by-side to a $100k Phantom. They'd probably also want some tens of k$ for such a promo on a large channel like that.
@RodrigoVzq7 жыл бұрын
You can try, I don't see them as that. They seem cool guys. If you can afford it, you can give them one unit. Their feedback could be valuable apart from the publicity, don't aim it like you are trying to get advantage of them
@joeambly68077 жыл бұрын
they seem like "cool guys" because you dont really know them and they are celebrities ;)
@HitAndMissLab6 жыл бұрын
try capturing sound waves of human speech with Schlieren images.
@UpsideDownHamster7 жыл бұрын
Who's the heartless person who left a dislike
@blogsdey44637 жыл бұрын
qeria más información sobre la cámara
@tesla5007 жыл бұрын
You can find more information at www.krontech.ca Puede encontrar más información en www.krontech.ca
@blogsdey44637 жыл бұрын
El precio amigo...? Soy de Perú como lo obtendría ?
@tesla5007 жыл бұрын
The camera is $2999 or $3399 depending on options, this price is in US dollars. You can look at our online store at krontech.ca/store to find out all options. Please note that the camera and technical support are only available in English language right now.