Table Saw Stand and Outfeed Table

[@RkRk-xy9fx]

Wow! Perfect for my application! THANK YOU. Please do more!

[@dclaghorn2]

I’d love to see the instructional video of this, or get plans to do for my Grizzly contractor saw. LOVE this project!

[@oldokieworkshop]

Dave: Thanks for the nice comment. I was not making videos when I built the stand and outfeed table. I do make rough drawings sometimes, but do not publish them since they are so rough. On the Old Okie Workshop website, there are some still pics and a short explanation that might help you. www.oldokieworkshop.com/ Good luck on your project. I'm sure you'll do fine!!

[@joedance14]

Nice looking outfeed table. How is it attached to the table saw? Is the white surface Formica? Melamine? Painted? And what kind of wood was used for the border?

[@oldokieworkshop]

Thanks, Joe! The short table is supported by legs that extend up from the base and the hanging table attached to the short table with hinges. I used melamine with pine strips on the edges, unfinished. You can see additional information on my website: www.oldokieworkshop.com/ Click on Table Saw Stand and Outfeed Table. Good luck!

[@homie817x]

Nicely done, question, how did you mount the shorter outfeed table?

[@oldokieworkshop]

See the pic I added just for you at: www.oldokieworkshop.com/Table%20Saw%20Stand%20and%20Outfeed%20Table.html :)

[@homie817x]

thank you for confirming

[@mebubba3845]

What do your bands attach to? What you did is very similar to what I was envisioning except my hang up was the physical connection from the rolling stand I built and the saw.

[@oldokieworkshop]

MeBubba: Not sure what you mean by 'bands'. The saw mounts on the rolling stand - it really just sits on top of the stand. Then the short portion of the outfeed table is mounted on 2 legs that go down to the base of the stand. There are 2 short iron bars that attach the underside of the short table to the back of the saw. It is not for support, but rather for stability of the short top. The larger portion of the outfeed table is attached to the short part by 3 hinges. See oldokieworkshop.com or go directly here: www.oldokieworkshop.com/Table%20Saw%20Stand%20and%20Outfeed%20Table.html Good luck! Richard