TADO vs Meross - Comparing HomeKit compatible whole home smart heating solutions

[@MarksTechVlogs]

Purchase links and exclusive discounts... Meross Smart Thermostat: bit.ly/3QAnVH0 Save 10% with code marktech10 Meross Smart Radiator Valve: bit.ly/46NJNEr Save 10% with code marktech10 Save 15% when you buy directly from TADO with this link: referral.tado.com/r8nadaky TADO Thermostat (wired): geni.us/6mr9B TADO Thermostat (wireless): geni.us/CwwKwBk TADO Radiator valve: geni.us/217aL

[@farhada147]

Thank you Mark. Very helpful video as I am looking to purchase Tado vs competitors and the more of these I watch, the more informed I feel.

[@joeimber242]

Hi, great video - question, do the Meross TRV’s need be to in direct range of the hub controller? I’m thinking/hoping that as long as the TRV’s are on the same WiFi network as the HUB then that is ok. I know many setups require TRV’s to be in direct contact with the HUB. My house is large with extremely thick walls. However with lots of Access Points I have a great WiFi mesh coverage. Look forward to your reply.

[@MarksTechVlogs]

I think they just need to be in contact with their hub and the cloud does the rest

[@danielday4725]

Hi. Thanks for the review. Can you confirm? If a tado radiator thermostat calls for heat say in one bedroom, does that override the main house thermostat and switch on the heating. Heating only that particular bedroom and not the whole house, if the other rooms radiator thermostats aren’t calling???? Thanks in advance.

[@MarksTechVlogs]

Hey, The Tado is capable of doing that because of open therm. It will however head every radiator that doesn't have a Tado valve as well as the one in the room that has triggered it (if that makes sense). It's because the Tado valves control the hot water going into the radiators whereas the overall heating control sends hot water round the system. Hope that helps

[@danielday4725]

@@MarksTechVlogs thanks for the help. So does this feature require the use of open therm for it to work then?

[@MarksTechVlogs]

@@danielday4725 Yes but I'm fairly sure this is enabled on the Tado Thermostat by default (if not you can enable it yourself) so mine works fine 🙂

[@danielday4725]

@@MarksTechVlogs I’m not sure my boiler has opentherm capabilities I’m afraid.

[@JonasHamill]

Do you have a link to the back box you bought from screw fix for the meross? I want to make sure I get the right size!

[@MarksTechVlogs]

www.screwfix.com/p/1-gang-surface-pattress-back-box-47mm/4411d

[@JonasHamill]

@@MarksTechVlogs Thank you!

[@hessulipoika13]

Meross price is 50% cheaper, you sgould mention that

[@JMPDev]

0:47 he literally starts with price