Taig CNC Part 12 - ProfileCutOut Completed

[@yowgiaoart5630]

wow... interesting!

[@BuDWiskey]

Hello and thank you for watching. :)

[@meocats]

show us how you debur a part with your magnetic polisher

[@pauldiaz4273]

Hi Brian very nice video, what kind of driver box and stepper motors do you have? Thanks

[@BuDWiskey]

Hello Paul - and thanks for checking out my videos, and your interest. Yeh - my driver box was my first project in the CNC world. I built that for my small Taig mill. My mill has NEMA23 8-wire stepper motors, and I used the Gecko G540 motor controller/driver module. That chassis you see in my video holds that G540 controller, as well as the power supply. I included several ports/connectors on the front panel, so I could plug the motors in easily. The box also has a few relays in it - they allow me within software/G-code to turn on&off the spindle, or a shop-vac/coolant, etc. I have a cooling fan installed, as well as the "blue" colored panel meters for measuring how much current the motors/machine is drawing, and at what voltage. If you have any specific questions, don't hesitate to ask, I'll do my best to help you. Thanks again.