Tailgates and Chainsaws, Tuning big Vintage Power saws

[@justme8108]

The plug ---that's what I thought of after you checked the fuel. 62 year-old woman here, but worked with chainsaws, tractors (old) and trucks with distributor caps. Thanks for the videos. Love them.

[@Shane_Reynolds85]

BBR is always a voice of reason and inspiration. I can't begin to say how thankful I am for this channel and the community. Be Kind! Love Wins!

[@bertlemieux1410]

Hi Ray great to see does old saw good memories behind that , thank you for charing all the details with the community and the world watching and appreciate all the good things you have say about power saw , it’s so nice you take your precious time to explain all so we’ll ✊✊✊✊🪵🪵🪓🪓❤️👍

[@terrywhite9017]

Good morning Buckin, good to see you. Nice saws, old sparky, pulling a fast one. Got watch him. Love to all. Axe of Kindness Soldiers 2023.

[@jackwoodason9908]

Billy thank you for creating the content we all look forward to! I know I certainly do! Cup of coffee and BBR video is a part of my daily routine! Much love to you and the family from the UK 🇬🇧

[@riggerup]

Change is the only constant in the universe. Love you and your message brother!

[@robraines859]

Love your energy Billy, Oregon been watching your videos, appreciate you man.

[@itllkeal]

I got myself a 4.5lb Elwell tazzy, and I'll say Buckin watching your wood bullets and the tazzies then using a tazzy even with a hardware store handle. Your wood bullets Must be totally nuts. 🤪 I've been splitting knots all day. I've actually been trying to break the handle so I have a reason to change it

[@paulmcreynolds1774]

Always an inspiration brother. Stay safe and God bless you and your family

[@leonschufletowski8874]

Buckin. Another learning video with coffee. Appreciate the content and the time spent with you. ❤

[@stevetheriault4164]

THANKS BUCKIN FOR ALL YOUR HARD WORK YOU PUT INTO MAKING YOUR VIDEOS BEST WISHES FOR 2023 STAY SAFE BROTHER

[@BuckinBillyRaySmith]

thx Steve

[@thebradleysoncatbirdhill6849]

My friend, it is true that all of these beautiful people have created the community! But you, kind sir, have created the show which brings us all together. It reminds me of an old school variety show where all of your guests come on and we get to see their wonderful talents displayed! Love you all...❤❤❤ Lieutenant Bradley

[@stevenkeller518]

God is great you're awesome brother myself and a couple of my other friends have been watching you on KZbin for the last month for some reason we can't put the damn phone down you're so inspiring you give us hope so to you love and respect thank you Cuda

[@justinweaver8107]

Love logger wade to hes awesome. Stormin here tonight about to turn in hope all is well an u have a good week

[@twobeards6714]

The best thing about wood heat is wandering through the house in your shorts when it 10 Fahrenheit outside.

[@headspacehiker]

Came here from the algorithm, I had a feeling you were from BC. Cool vibe, great vids and educational!

[@rockkhound943]

That chain I mind blowing... so many unknown chain types I need to learn

[@denniswaggoner8056]

From eastern Oregon to western BC. Love you brother

[@anthonyoverbee2049]

Great content as always, Buckin!!! Love wins God bless!!

[@Patriot-Logic]

Most peaceful times a man can have is at an open tailgate on their truck! Working on a saw, tying on a jig or sitting enjoying GODs’ creation!

[@terryw.milburn8565]

Great Tuning Job For Rob ! Keep On Keepin' On Friends. Hap-E 2023 All ! ATB T God Bless

[@matthew-gn4qd]

thanks for today's video mister, always appreciate your time for us ✊ ... apart from the bread and butter of messing about with wood and saws etc there is much good stuff thats said on the interjections ... work hard * be honest * be kind * I got loads to do right away ... steady progress should see results. i think i gotta break the mold this year. it feels like the right time to do so 👌 look forward to seeing more from you soon. thank you mister. the vibes is helping me get places I need to be.

[@BuckinBillyRaySmith]

this is good , I turn fear or lets say uncertainty into excitement ..it works great

[@matthew-gn4qd]

fear into excitement.... I will do that ❤️ thank you 'buckin 😁

[@ishure8849]

Gday Buckin, when I went to to Tech High I remember our Automotive teacher talking about when a two stroke is running out of fuel and the revs climb he called it hunting. Oregon is making a baby C ! your a heck of an influencer 👍.

[@danshouseofsmokeandoutdoor7119]

I love them old saws. Especially that old homelite my dad logged with one in the 60s. If Rob want to sell them 900 homelite I am interested. Thanks for the video. Hope you and your family had happy holidays.

[@Patriot-Logic]

In the mid 80 my dad had a new John Deere chainsaw! It was a rebadged McCulloch! Loved that saw!

[@madisonhadley7906]

What model? Most older john deeres were echos

[@wildwestcoast8095]

Great words for Tuesday morning thank you Buckin.

[@yeahnahsweetas]

Love will prevail! Happy new year everybody!✌️

[@dougpiper6534]

HNY to you all, great content on the old saws.

[@tonyjones9715]

Happy new year's to you and your family from Alaska.

[@dingui875]

Bonne année 2023!!!!!!! Et surtout un bonne santé à toi et ta famille!!!!

[@randysavage8963]

Great positive video as always thanks buckin

[@joehackett9471]

Great video's those are some sweet saw's. I like your positivity. Happy New Year!

[@ToddAdams1234]

I was watching some stuff in his playlists when “the duty called”! lol

[@edwarddavis507]

I hope BBR and Buckin’ Army has a joyous, peaceful, and happy New Year! Let’s make it happen!

[@BuckinBillyRaySmith]

lets go

[@nateolmsted899]

Logger Wade is awesome

[@stuartramage5933]

Thank you so much Billy. We all love you. Stuart and Kelly. Peace and love the only way my friend.

[@bobbyscott8024]

Great content Buckin'! From Sophia, N.C. USA. Let's go!!!!!

[@richardrailey6291]

Ha ha I think Oregon's tryin to copy you brother. Love it. We are the creator of our own reality. Thank ya Buckin!

[@winterswijk1970]

👍🙏👍,,,lovelove.

[@paulgirard5284]

Hi Bill I cut sharpen all my saws after cutting fire wod

[@paulgirard5284]

I bought a two-sided patch that I used for splitting too

[@johnlattanzio9859]

Thank you for the daily videos friend, I watch and look forward to them everyday even on my birthday witch is today HAHA!!! I hope you and the family are doing wonderful and had an awesome new years and Christmas brother Buckin. I hope one day I can meet you man, You have been a hugely inspirational person to me and even got me back into powersaw's witch has brought me a lot of joy...✌😁 Again thank you for all your efforts Bill. BE KIND FRIENDS

[@michab8379]

Greetings from Poland Be kind💪

[@davidburchfield2720]

Happy new year buckin and family and the hole buckin army !!!!

[@BuckinBillyRaySmith]

thx

[@mhking136]

Happy New Year! 🎉 Stand Tall!

[@snowman6678]

Happy New Year friends!

[@BandfromGlad]

Happy New Year Snowman.

[@snowman6678]

@@BandfromGlad Love you!

[@michaelwhiteoldtimer7648]

Snowman hope you had a great Christmas

[@RGD-Games]

i have a McCulloch, that runs and cuts beautifully... Revs up the second you touch the throttle etc.... The only issue it has.... If im cutting into a tree or a big log.. and that chainsaw is going flat out... When i let off the throttle, Sometimes it dies out... ONLY AFTER letting off the trigger.. Drops its revs as it should, goes down to near idle.. then just dies out... Always fires right back up again though... When im letting off from a big cut, I have to sometimes blip the throttle a couple times, Just while the revs are coming down... To keep it running.... Its not the idle too low... Because i have it set to just where the chain doesnt wona rotate on the bar... Slightest increase of idle, Makes the chain start to rotate when idling..

[@harveystephens6115]

Happy New Year!

[@d.ahwooomazenkas8075]

Ahwoooo get one 👍❤️

[@daviddavies9996]

Happy new year 🥳

[@michaelwhiteoldtimer7648]

Welcome everyone to the greatest show on earth, pull up a stump and grab your Buckin coffee cup. Let the show begin

[@BuckinBillyRaySmith]

love wins

[@northernwoodsman]

Would you happen to know where to get a pioneer 1110 primer? I just bought one and its not working. previous owner by-passed it.

[@leonardvirtue5753]

Nice 😊 🤠👌🤙🤙

[@brianbutcher8216]

I think Oregon owes someone some money for that lol …..soon as I seen it I was like the baby c lol

[@BuckinBillyRaySmith]

Pretty kool eh

[@garengtutorial8923]

Oke lah bos 👍👍 bagus

[@ralphknudsen6299]

Im going the learn and get good with the flick, and learn to sharpen chain and to stand up and buck💕

[@jeffdutton2500]

My dad and grandpa used to always do the baby "C" but I always have gotten the gullet because I thought it was better.

[@EricaMTB]

Try some .404, Oregon 80 if you can find some.

[@ericeisenbeis336]

Hey there Buckin I recently bought a small husky at homer saw 18 inch brand new … and it is really cold blooded it will start and idle ( ish) but will not take any throttle just is like bra bra and wants to die out so I’m needing to adjust the carburetor for sure I’m assuming it’s lean on the low side but I’m not really to sharp on two cycle tuning … any advice would be appreciated…also I have a large stihl saw what do u think of the 084 model

[@OpenAirAdventure]

Good conversation

[@Toledowhitboy23]

I need help with something!! I'm a small scale picker ..and by that I mean once in a blue moon. I have a chainsaw made by hoffco ..I believe it's from the 60s and the model is the t-58.. cannot find much at all on this specific one online

[@taylormach1699]

Old friends and old saws you can depend on.

[@jamesdunn8893]

happy new year

[@dquinn8755]

Spark plug will get you pretty often. Had a newer outboard leave me stranded on the river. Rest the plug against the block - pure lightning storm. I basically rebuilt that whole motor and it still wouldn't run. Put a $7 spark plug in it and you can sneeze on it and it will crank and run. Lol. Lessons... even xomparing spark between the new and old plug there was no difference but it just wouldn't fire

[@twobeards6714]

I just went through that plug thing with my 357 xp. Three buck fix. Edit. Reminds me to get another plug today.

[@dquinn8755]

@Two Beards oh yes. I have a spare plus in my tackle box for the boats and in the tool box that goes with the chainsaws haha. Every 2 stroke has a back up plug

[@AuctionIndiana]

🌲💚🌲💚🌲💚

[@michaelwhiteoldtimer7648]

Happy New Year

[@AuctionIndiana]

@@michaelwhiteoldtimer7648 likewise to you Buddy!

[@BuckinBillyRaySmith]

Happy Happy new year friend

[@mrfirewood6215]

That 404 chai rob has is oregon 59j skip tooth. It's available in 59L which is full house.

[@BuckinBillyRaySmith]

thx bro . im actually interested

[@VintageSaws]

Hey bbr, just inhereted a stihl 08s from my grandpa and he said its been sitting since 90, 91 from his dad being not well and passing. Took it home cleaned the filter flushed the gas and fired right up. Had any experience with a stihl 08s? What's your opinion on that old saw? Seems torquey going to test it out later!

[@canadianboyee]

Buckin we need a full tutorial on carb tuning!!

[@tadghmaw7013]

He has some from before. Search " how to tune that old powersaw buckin' " and you will get a video 👍

[@canadianboyee]

@@tadghmaw7013 thanks! Thought I watched them all must've missed that one

[@ridgemyers4912]

How hungry are you your chains for falling vs. buckin

[@marcushaynes843]

Is that a Canadien PM 270?

[@justinweber1838]

You know training your body to pull a start cord with your left arm is no easy task...lol Kind of like trying to throw a baseball left handed.

[@ionutfilip3555]

Oregon Chainsaw Chain, 33Sl Pro-Guard Premium C-Loop

[@more536]

I just got that same chain to fit my newly acquired SP125 and had the same thought! Baby C! It’s 59J .404 .063 chain

[@t.texasty]

Hey Buckin, is that a 270 Canadien? If so I have a complete 270 here I’d send the man for a parts saw or another fixer upper.

[@BuckinBillyRaySmith]

ill check thx brother,, just checked 275 TT

[@t.texasty]

@@BuckinBillyRaySmith Ah, the big brother. Well I might just send a box of old powersaws your way 👍

[@dillgross6758]

She's a baby C! that's forsure!

[@tombarber1955]

Hey Buckin I have a Mac 250 super how old do you think it is let me know

[@earlwright9715]

I suppose, the mercury tailgate is custom?

[@BuckinBillyRaySmith]

Factory

[@earlwright9715]

@BuckinBillyRaySmith really, is this a Canadian thing? I've never seen it in the states.

[@NotQuiteAsianOG]

Buckin' can cut wood, split wood, and tune a carb. But can Buckin' cook?

[@thk98]

Can anyone help with the name brand of buckins flannel? Looks like a heavy duty one hard to find these days.

[@justinp7687]

Hickory shirt company makes nice flannels and hickory's.

[@1944chevytruck]

be kind

[@davec1835]

Just bend the arm to get more idle out

[@eddyarundale1566]

👋

[@kingsaws]

What is that blue and whit saw . Canadian?

[@BuckinBillyRaySmith]

yip

[@SteveRogers370]

👍💙

[@motodiver6720]

1000👍

[@tomtheplummer7322]

Those magnesium cases turn to powder one day.

[@islipfdchief]

Never seen of 58. Their is a listing for 58L,J and 58CL,CJ in .404 .058 Post a picture of the box number please. That under cut does look deeper then what I have seen. It's in the flipping catalog page 151. Just not on the web site. Can't find a the manufactures picture of the cutter.

[@steelcityperformancesaws]

yes sir!

[@stevenlaxton3618]

Happy new year Buckin your famjamly and this whole amazing community this year is going to be amazing one way pr another for my family mf girlfriend and I welcomed our second daughter into the world on new years eve(yeah yeah enter jokes about my questionable past here 😄) and this year my plan of change is to better my attitude as well as start hanging more and more axes. I've been having a tough time finding heads but I figure if I get good enough at it I may be able to make enough side money to play with more saws too and if nothing else to hopefully see less people camping with such meh axes lol take care yall

[@kenstoops3494]

no ty ty to god

[@bulldogtree4449]

hi billy

[@BuckinBillyRaySmith]

hey

[@leonardvirtue5753]

Teacher??? I hope that’s your doing not there’s😲🤔 with that chain🤨 🎥… someone is watching your Channel from Oregon😳

[@mmg6282]

Buckin…buddy…keep your shirt on… No offense….but it’s a thing man… Symptom of my upbringing….maybe so but it’s just not something us southern buys aren’t used to. Other than that…great vid on the the old saws…I was thinking ignition as well but wasn’t thinking plug…good catch

[@BuckinBillyRaySmith]

oh just wait til summer brother yer not gonna like it here,.. i plan on being shirtless as much as possible ,, just a friendly warning , oh! and I am un-offendable . great ta see ya

[@pm270100]

mate fire place is no good on the wall get it down low 😁😁😁😁😁😁

[@BuckinBillyRaySmith]

he he

[@pm270100]

@@BuckinBillyRaySmith i know where all the hot come from and it must be working well 😁😁😁😁

[@twotalljones4790]

what is the gas to oil mix on those old saws.

[@shootscoot883]

I got a question for ya I was cutting wood today and I started having issues with my throttle!! If I squeezed it about 3/4 of the way it ran perfectly but if I gave it all the throttle it would bog down any ideas? Thanks for videos!!! STAY MOTIVATED FRIEND!!!

[@matthew-gn4qd]

sounds like not enough fuel getting through. if i get a problem like that I check all the easy things first such as spark plug, compression / air leaks, fuel leaks, breather vent, try tweaking the high jet and see if it improves. if i can't fix a problem by doing the basic stuff then i normally take the carb off to see whats going on in there. it might be dirt or water blocking the main jet or fuel passage ways. or possibly even a gasket leak or float / needle valve problem - consider taking the carb off and taking it apart to check it. check the colour of the spark plug. if its running lean it'll be very light in colour (like a caramel white). if its running rich it'll be black. a good colour is light tan. hope that helps + hope you get it fixed!

[@BuckinBillyRaySmith]

its yer butterfly i reckon which is in direct link to yer throttle linkage its probably wide open when yer at 3/4 then when ya crank it maybe goes past ,, what saw?

[@shootscoot883]

@@BuckinBillyRaySmith unfortunately it's a walmart special poulan I can't afford the big name brand power saws!

[@DTD-no7wl]

Is Rob Billy’s brother I’m new here just curious

[@AuctionIndiana]

Powersaw Rob is a friend

[@andrewmagee1666]

The only thing i dislike about watching your videos is I can only give you ONE thumbs up until i get to the comment section Soo.....👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍. Thank you for what you do!

[@BuckinBillyRaySmith]

feelin yer gratitude

[@richardrailey6291]

Right on brother I feel the same way