Tap to unmute

NordicTrack S22i Assembly - How to Build NordicTrack S22i Studio Cycle - S10i and S15i assembly

  Рет қаралды 52,501

TailHappyTV

TailHappyTV

Күн бұрын

Пікірлер: 69
@beretta0222
@beretta0222 4 жыл бұрын
I found it easier to install stabilizers with base raised about an inch from the floor. That way there is no pressure on stabilizers and you can wiggle them easier for a better bolt alignment.
@johnboyd5025
@johnboyd5025 2 жыл бұрын
Got an 22i for Christmas and will assemble it later this morning. This video was helpful to know how easy it will be to put together!
@JavierCarrion
@JavierCarrion 4 жыл бұрын
Best assembly of the s22i so far. Even better than Nordictrack video.
@TailHappyTV
@TailHappyTV 4 жыл бұрын
Thanks Javier, that was the goal :)
@RogerClubv
@RogerClubv 3 жыл бұрын
Great video on the s22i assembly. Thank you! I found that it was much easier to install the monitor if you moved the swivel upward so that the monitor faced toward the ceiling.
@ElDiablo223
@ElDiablo223 2 жыл бұрын
Thank you sir you made the assembly much easier, I’d like to make one observation if I may, I took one of the small Styrofoam squares out of the box and placed it under the bike frame to prop it up, that made it much easier to line up the screw holes on the feet crossbar since I was able to wiggle the crossbar with one hand and put the screw in with the other since the styrofoam was taking all the weight off the crossbar. Best regards.
@joelbenevides1112
@joelbenevides1112 3 жыл бұрын
This guy skipped past a ton of headaches and made this look simple. Be prepared for a bigger challenge than this video leads you to believe. Screws dont go in easy at all. Wires dont feed through front rack easy at all. The monitor does not sit flush. This video is very little like the actua assembly.
@TheDasbull
@TheDasbull 4 жыл бұрын
I work on and repair these bikes. One thing to check is the crank arm "tension bolt." It's the small silver bolt that is in the center of the crank arm (3mm hex head). Make sure the crank arm is tight against the right shroud/belt guard. Tighten the 5mm allen head bolts after lightly tightening this silver tension bolt. Shipping companies have been a bit rough on the bikes lately - affecting the crank arms - if the crank is loose, the axle moves around and can rub on the belt guard or cause early bearing failure. Thanks for the video 👍
@TailHappyTV
@TailHappyTV 4 жыл бұрын
Wow, I would have never thought to check that. Thanks for the awesome tip and sharing your expertise here for everyone to see Jeff!
@TheDasbull
@TheDasbull 4 жыл бұрын
Always glad to help 👍 Enjoy your new bike 🙂
@erikpreston2393
@erikpreston2393 4 жыл бұрын
@@TheDasbull I just ordered the s22i today on the strength of these clear, cogent reviews by @tailhappyTV. I have a little trepidation since reading some of the "out of the box challenges" in various forums, and premature repairs needed. Understanding that these don't represent the whole s22i population, my question is: are there any other nuanced assembly tips that you could offer that will set us up for success?
@erikpreston2393
@erikpreston2393 4 жыл бұрын
Thanks so much for your channel! I've studied it like a Talmudic scholar and am purchasing the s22i after your robust head to head comparison... I was wondering if you might comment on the 3rd position taxing effort, and if there's a lot of monitor movement/handlebar movement. Your demos look so smooth, so it seems incongruent with some of the forum comments that have gripes about excessive movement. I haven't received mine yet, but I'm 6 feet, 240lbs... so just trying to manage my expectations in advance. Love your channel!
@TheDasbull
@TheDasbull 4 жыл бұрын
@@erikpreston2393 I recommend that when you begin assembly, that you "start" all fasteners before tightening them. This is particularly important with the front and rear base that require the large allen head bolts. I have seen a few bikes that the holes don't line up perfect. A few minutes with a round file (tool) can give you the needed clearance - this helps a great deal with stability and noise. Use care and make certain to properly tighten the handlebars and console using the bolts provided. The s22i console is big and somewhat heavy 🙂. Grab a friend when you assemble this part - don't want to drop it! Last but not least pay attention to pedal assembly - tightening direction (have had several customers not pay attention to tightening direction 😕). Enjoy your new bike! 👍
@DirtyDan71327
@DirtyDan71327 2 жыл бұрын
My 2022 s22i will be here in a couple hours. I'm so excited.
@marctronixx
@marctronixx 2 ай бұрын
2 years later, how is it!!!!???
@lloydfrancis9149
@lloydfrancis9149 3 жыл бұрын
Thanks so much, that's was difficult but worth it
@paulmccarthy6923
@paulmccarthy6923 3 жыл бұрын
Great video, I was able to use it to set up my S10i. I especially appreciated the advice on the stabilisers, they were causing me problems! Only issue I had was the saddle part, I had to go back to the manual to figure out how it was attached, but to be fair this might be a feature difference between the the S10i and the S22i.
@InBonesWeTrust
@InBonesWeTrust 3 жыл бұрын
Great video.... I wish I had last year LOL before I tackled this project. This was a brutal install. Glad I had the S10i...lol. He said, "I can't believe I'm going to put these pedals on, but that's what it came with." 🙄💯% agree.....SPD up.
@glennrowswell3007
@glennrowswell3007 2 жыл бұрын
Thank so much for this, made the job a lot easier than the Nordictrack treadmill I did! lol 😂
@MollyTyg
@MollyTyg 3 жыл бұрын
Thanks! Very helpful.
@Bettie_Noir
@Bettie_Noir Жыл бұрын
This is awesome thank you so much! I’m a bit confused by the pedals however. How do I clip in with my SPD cleat shoes? Do I need to buy an adapter? Thanks again I’ve enjoyed your videos!
@JoeMurphysGuitarlessons
@JoeMurphysGuitarlessons 3 жыл бұрын
Could you recommend a set of decent non cleat pedals for the bike ?
@Bryanaisawesome
@Bryanaisawesome 3 жыл бұрын
Thanks for the video! Is this the s22i? If so i can't see the same HDMI outlet u have one yours
@SrSospechoso
@SrSospechoso 10 ай бұрын
would you recommend the s10i? i'm between the s10i and the proform studio bike pro 22
@dwaynehicks6714
@dwaynehicks6714 3 жыл бұрын
My console backing mount thing is stuck at the 90 degrees away from the rider position......I'm assuming it's like supposed to face the rider, or am I to say "go go gadget neck" to see it? Also the m10 nut and bolt only tightens so far...nowhere near far enough to hold anything in place 😞
@maracanciano2773
@maracanciano2773 2 жыл бұрын
I have the same problem rn. Do you found any answers? I am afraid to force it, and brake anything. Thanks
@glennpauling723
@glennpauling723 2 жыл бұрын
@@maracanciano2773 same here .. did you find a solution?
@marctronixx
@marctronixx 2 ай бұрын
bro got a showroom in his kitchen 🤌
@ThatFlippingFamily
@ThatFlippingFamily 2 жыл бұрын
I am happy to know I’m not the only one with the bases, REALLY not a good start for me buying a $1700 bike… never have I spent so much money on something that so far feels so cheap..
@TailHappyTV
@TailHappyTV 2 жыл бұрын
Did you get the new 2022 model or the same model I have?
@lipiashok54
@lipiashok54 4 жыл бұрын
Great video . But is it too heavy to first take to the basement , if I were to do it alone ?
@TailHappyTV
@TailHappyTV 4 жыл бұрын
You will need help probably, it's very heavy
@GoLongAmerica
@GoLongAmerica 2 жыл бұрын
Looks like I have the 2021 version. Is it hard to easier to assemble?
@sc5102day
@sc5102day 4 жыл бұрын
How doea the max incline and max resistance on the s22i compare to the king?
@TailHappyTV
@TailHappyTV 4 жыл бұрын
Coming soon
@jljuliano1
@jljuliano1 3 жыл бұрын
Lest I forget to thank you in my post below, thank you, you might have saved an old man's heart: look below for my tail of whoa
@sonotaps
@sonotaps 3 жыл бұрын
It’s almost like the manufacturer tolerances are so unforgiving and non-user friendly that they want to make it so at least one bolt on each stabilizer strips.
@timothyharris7927
@timothyharris7927 2 жыл бұрын
After getting everything out of the box and laid out...how long do you think it will take to assemble?
@TailHappyTV
@TailHappyTV 2 жыл бұрын
2 hours for the old one seen in this video, the 2022 model is much easier and quick to build, I just put it together this morning
@suzannelong3914
@suzannelong3914 2 жыл бұрын
I have a disc with a screw in the middle that fell out. Can anyone help me with where it belongs? They are going to send a tech out in a few weeks but I want to see if it's an easy fix. :)
@SparksandBubbles
@SparksandBubbles 3 жыл бұрын
Does it do a gentle sound when you turn the pedal or is it completely silent ? I just installed mine and there is a gentle sound as the pedals are turned.... Normal or something to look into ?
@2023JCWMINICOOPER
@2023JCWMINICOOPER Жыл бұрын
Legend has it that you are still waiting for an answer one year later....
@CrimpKeeper
@CrimpKeeper Ай бұрын
Where’s the port for the power cable
@sharonthomas6904
@sharonthomas6904 2 жыл бұрын
Wish he would have shown where the port for power supply
@JethroXP
@JethroXP 4 жыл бұрын
I just got my s22i and the monitor does not have Audio out, HDMI, or USB. Is this a different version? A friend who purchased one last month confirmed his doesn't either.
@kellyshah6400
@kellyshah6400 4 жыл бұрын
Hope this helps. I just found out that the s22i which NordicTrack is now offering on its website is version NTEX02121K12F. I HAD been considering Best Buy's offering (as they do have an option to assemble for a fee). However, I found out that Best Buy sells the previous version of s22i, NTEX02117NB. This leads me to assume that there may be, perhaps, even older versions still being sold elsewhere? So things like HDMI, USB, etc may vary amongst these versions. This is really confusing when reading reviews out there as they do not inform you which version they pertain to. The NordicTrack rep (on their website chat box) said this newer version was released within the last week. Today is 1/23/21. Hope that helps.
@erikpreston2393
@erikpreston2393 4 жыл бұрын
@@kellyshah6400 I just ordered from Amazon. 1/29/21. Wondering which version it might be! I'll know on February 9th!
@zeuschowie7473
@zeuschowie7473 3 жыл бұрын
Its supposed to come with an Hdmi Port!
@murali1790able
@murali1790able 2 жыл бұрын
Where do you put the power cable. You missed the important step
@TailHappyTV
@TailHappyTV 2 жыл бұрын
The back, kinda under the rear frame tube
@LukaSpecial
@LukaSpecial 3 жыл бұрын
I like the S22i more than the Peloton
@thinkingoutloudcommentaryw2099
@thinkingoutloudcommentaryw2099 2 жыл бұрын
🚴🏽‍♀️💨 Yippee ‼️
@originalmatrixescapee
@originalmatrixescapee 3 жыл бұрын
Can a 45 year old female who is semi self sufficient do this assembly on her own or should I seek help? What's the worst part of doing the assembly that would be hard for one person? Is it the monitor?
@TailHappyTV
@TailHappyTV 3 жыл бұрын
the hardest part is probably moving the box around and getting it out of the box, next is getting the bolts for the base on. the monitor is tricky with one person but i believe in you ;)
@originalmatrixescapee
@originalmatrixescapee 3 жыл бұрын
@@TailHappyTV I got through the assembly by myself. The worst part for me were those inner bolts at the bottom. I tried several times to get the threading aligned and not sure if it was perfectly aligned in the end. Also the delivery crew would not put it inside my front door, only into my garage. So by myself getting that beast over the threshold step with a torn lumbar disc was not the best experience. I got the base put together in the garage so I could at least maneuver it through the house where I finished up assembly in the room it's going to go. Overall I'm glad I did it myself and I'm enjoying the bike so far. Really loving the outdoor series rides. Happy with my purchase and your video helped me get it put together.
@sheilam.sierra3989
@sheilam.sierra3989 3 жыл бұрын
Not helpful lol I struggle with the seat! Ugh
@TailHappyTV
@TailHappyTV 3 жыл бұрын
It's a pain, use your own wrench if you have one and careful with your knuckles
@juliekrause1056
@juliekrause1056 3 жыл бұрын
Same. I am currently struggling with the seat. Can’t find a video to show me how to do this.
@TheTruthHurts732
@TheTruthHurts732 3 жыл бұрын
My monitor is different.
@mrwilson6108
@mrwilson6108 4 жыл бұрын
Do you even need to read the instructions at this point? You could always start a side gig as a bike builder
@TailHappyTV
@TailHappyTV 4 жыл бұрын
lol, if i am going to create a how to build video of course i read every step, but no, def don't need instructions. that being said, this bike was pretty tedious to build, had difficulty getting bolt threading aligned for the stabilizers
@waltertorello4334
@waltertorello4334 3 жыл бұрын
They can keep it
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
8 Things I HATE about the NordicTrack S22i studio cycle!
10:18
TailHappyTV
Рет қаралды 65 М.
NordicTrack S15i Studio Cycle Review
22:22
TreadmillReviewGuru
Рет қаралды 55 М.
NordicTrack S22i Studio Bike - 10 Things You Didn't Know!
6:37
Steve Julien
Рет қаралды 10 М.
NordicTrack S22i How to: set up for proper rider ergonomics
5:52
iFIT vs. Peloton Scenic Rides: Who Does it Better and Why?
8:26
Connect The Watts
Рет қаралды 37 М.
NordicTrack S22i Bottom Bracket Bearing Replacement
22:54
Bob Krueger
Рет қаралды 12 М.
NordicTrack S22i Exercise Bike Review: Peloton, Take Notice!
8:58
Garage Gym Reviews Everything
Рет қаралды 12 М.
NordicTrack S22i Studio Bike Review - One Year Later.
9:47
Steve Julien
Рет қаралды 12 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН