Taking It To The Next Level! | RM250 Rebuild 29

[@michaelallen9784]

You are an absolute rockstar when it comes to dirt bikes!! I take pride in doing all my work myself, but I would love to hang out in the shop with you for a day or month!!! You've taught me to tackle things that would normally make me nervous!! THANK YOU!!!

[@jimmadonna1436]

Love the brushed handle bars. I use BOLT and am happy with them. Looking forward to seeing this build come together.

[@mxjman]

Cameron, Hope you are recovering well. My thoughts are with you and your wife. You got this man!!!

[@acefreely3556]

Cleanest bikes on you tube. Great job brother. Even more impressed you understand politics and love your country. Hello from Canada. Believe me you don’t want socialism. Stay free America!

[@nicolabedford6231]

I would just like to award you this🥇For KZbins number1 Motorcross bike builder

[@f1hotrod527]

This channel is one of the best on KZbin. Keep the awesome content coming. And I think this channel has single handily rescued 2 strokes. The manufacturers are going to have to start making 2 strokes again.

[@drzeldaglitch]

Cameron, i just wanted to thank you for all your videos over these years, i've been a proud subscriber for a long time and you have motivated me to buy my first bike, rebuild it and ride it, i am currently in the process of rebuilding a yamaha dt50r into a dirtbike, gonna do a fork swap to upside down ones, make the bike look as new and good as possible and maybe even do a engine swap, money is just my biggest problem, i have all the knowledge but not the money, but i won't give up and i can only thank you for the motivation, keep it up with the videos and the build!

[@ra5gto]

For an entirely new brake system on a custom bike like this maybe consider SILICONE brake fluid- it doesn't hold moisture like (glycol) brake fluid and doesn't ruin paint. Expensive but worth it.

[@justinmoto929]

Jimmy Albertson on the bolt kit 🙌🏼🤘🏼

[@macenbarmore1900]

Cam you have a great sense of humor ! I have an 04 RM 250 that's sick but nothing like yours but you are inspiring me to attempt a makeover !! Thanks

[@j.turner7487]

Loving this build. I not long ago finished a full rebuild and refurb of my 1998 rm250. Loving the little innuendos aswell. Wouldnt be a workshop without them pmsl

[@keiththeporkchop]

Brushed hangers look sick with the brushed casings

[@zacharydaring5454]

Always love when Cameron posts videos

[@aaronkirsch7381]

It’s getting close! Can’t wait to see what it looks like with a fresh set of plastics. Epic

[@mickeybeahl2233]

This build is absolutely amazing!!! Winning this beautiful machine would be right there with when I qualified for Loretta Lynn's 20 plus years ago.

[@robh3267]

A handy trick for brake pads is to sand or file a chamfer or beveled edge on the front edges of the pads, it makes installing the wheels much easier as the brake disc will slide in between the pads much easier.

[@robertwoods2505]

I remove the rear caliper guard and shark fin also and the mounting tabs. Much cleaner look. Looking sweet Cam. Can't wait to see it done!

[@ericsexton9110]

Cant wait to see this in action you have put alot of pride in this build and it shows,id love to have that bike its beautiful!

[@nearsightedfromthefarside6534]

Ooh that’s starting to look like a naughty RM

[@Cm-se4us]

Sick build man! I’m currently in the process of giving my rm250 2002 a bit of a birthday no where near as new and beautiful as your bike but you do motivate people to do have a crack with there projects! Much love from NZ

[@slagletoby]

I’m on the edge of my seat waiting for the RM build vid. 🥇

[@stevedouglas1654]

Can’t go wrong with a Smartcarb. I got the cast version on my 97 YZ285 and she runs great even at elevation in the desert outside of Bend, Oregon 👍

[@RezRydatwo3]

Got dang Cam, that bad Sally is coming along saweeeeet! Can’t wait to see the next vid.

[@kanehicks9321]

Good work Cameron. Love your little comedic slights throughout hahahaha. You are the bomb bud.

[@kellywatts4814]

Love your work cam I’m in lockdown in New Zealand so iv watched all your builds to date you do a fantastic job 👍🏻

[@3dbuilds19]

Got my first two stroke because of you and I’m doing a budget rebuild this winter

[@ktm250xcw]

Love the attention to detail. Bravo!

[@WTF.416]

Excellent attention to detail and your patience always pays off high level build as always and my inspiration for another RM 125 I am doing keep it up. Also get to a shooting range and it’s show some love to your firearms like you do your bikes

[@tobyleve6111]

Love the build I’m in the process of rebuilding and restoring my rm 250 all the way down to all the bolts and everything

[@katherinehill1493]

That is what I dream about. Craig hill Those zooks are bad ass!!!!!

[@mariosnikolaou5212]

Can't wait to see how it will turn up at the end.

[@blairguinea6811]

Precision job Cameron, the bike looks great

[@f1hotrod527]

I ran into the same issue doing brakes on cars. I wanted to back the lube in to keep the pins lubed and keep winter salt water out. If the pins don't have grease slots cut in them to let excess grease out, you develop hydraulic pressure pushing against the brakes. I still use plenty of lube, but if I feel any hydraulic force pushing back I remove grease or keep working the pins until there is no pressure pushing back. You can also burp the air pressure out of the rubber boots, push the pins all the way in then lift up the seal on the boot to let air pressure out, reseal the bottom before taking force off the pins.

[@rotax636nut5]

Loved it..the mouse hunt made me laugh so hard I nearly fell off my chair!

[@nicolabedford6231]

Bike is looking awesome can’t wait to see it finished

[@erichildreth7562]

The Renthal bars look amazing that way!! That was too funny watching you run after that mouse, too bad you did not get em! The brakes look incredible and the RM will stop on a dime the the CRF brake system! Thanks for sharing!! :)

[@stevedouglas1654]

Cam, yer builds are sick ! Better than a new RM250 💯🇺🇸🔥🔥🔥👏👍😎

[@Thewatson77]

Such an awesome looking bike and it’s not even done yet! Absolutely love the colors so far 🔥👍🏼

[@dylanswicegood471]

This bike is fricken beautiful as it sits now, cannot wait to see it finished and running! The mouse hunting was fricken hilarious 😂😂

[@somaaa5554]

how many dirty jokes you can fit in one video? Cam: Yes

[@Mcorlifeandworkstv]

Excited to see that bike running

[@vincentpatenaude9152]

I've been waiting all day for this video!

[@petermarco11]

Genius at work! Love the build ! Cant wait for this beast to be done

[@leewaken5059]

Jimmy Albertson AKA Top Jimmy.

[@chadvalliere8697]

This bike is going to be absolutely sick as hell

[@714_kx]

Are you going to do a full Polisport restyle kit on it or just the front fender?

[@Brian-xb6bx]

I like the bars. Original and they tie in the swingarm

[@adlywalker2012]

Jimmy Albertson is the fastest man on the planet!!!

[@0waverunner0]

LOOKING REALLY GOOD!!

[@alcopower5710]

You are a master builder……..this is such an awesome project⭐️

[@grahamwood1461]

Hi Cameron I have been following your rm 25o build and love it but I can not find any video s after build 29 I am wondering why love your work

[@Dont.....-]

So happy for you mate, What a life!

[@jeremiahsipaco6112]

Can't wait to see this bumble bee ripping the track 🤙🏻🤙🏻🤙🏻🤙🏻

[@emlervlogs5397]

Man, you do some great work! Super clean and you make sure to do it right the first time! BTW I love the brushed bars!

[@shreditude]

That clevus you guys made is awesome, I would love an aluminum one for my 04 rm 125!!

[@bradenqw3765]

that intire cockpit area is clean as hell imma do that

[@disneylandlover80]

This looks amazing! This is super entertaining to watch you rebuild dirt bikes, I would love to do something like this but I'm too afraid I would lose pieces, bolts, or important parts.

[@davew9360]

When tightening sprocket you should tighten/torque the nut not the bolt as the bolt is counter sunk . Very nice build though ,keep it up .

[@jabaribah5188]

Can’t wait till you start back posting the rm/rmz lol

[@kyleglassman237]

Loving this build Cam, keep it coming! Looking so sweet, ps Ive always thought Greg Albertson was Ronnie Mac. Hangtown is on in 20 mins, who you got Cooper or Lawrence?

[@keithdunlap2701]

Diggin' the Bars Man !! Coming right a long....

[@aderiley6592]

Was that 6 or 9 of Ronnie Macs bolts you used on that there front brake assembly Cameron? 🤩 I'm actually very surprised he put his name to any product with the word "brake" in it! You do know, "brakes'll only slow you down" right? 😆... RM69 legend... ...Always such a pleasure watching you work and learning from your videos. This build is coming together beautifully and was just the half hour of Zen meditation like content I needed right now to calm my mind and re-smile my soul bro X Keep 'em coming. Thanks man. ❣

[@dean754]

Great work Cam, bike’s looking sweet! 🏁 Just to mention, …Be careful with brake fluid near painted surfaces as it is corrosive and will strip paint! Not sure about cerakote ……🤔

[@dylcar]

So fresh and so clean

[@tejdz1337]

do you still plan on finishing this bike?

[@worpd_gamer270]

Beautiful work brother!

[@clinthenker6505]

What happened to the end of the RM250 build? I have been watching as a new subscride and it just stops here at Rebuild 29. This is some great work and very educational. Hope to see to complete of project. Thx!

[@robertwoods2505]

My buddy has a '08 KX450F and the rear axle nut (from a Honda) I gave him fit it. Looks nicer for sure. Any Honda with a 22mm axle will be the same (from '02 + on the 450s).

[@john-henryschwab5523]

Do a video on what you use to build the full bike

[@christophersharp1884]

This bike is next level! it would be hard to go out and tear it up or even put it on dirt.

[@HEAVYMETALJSTYLES]

Looking sweet!

[@alvarowanda]

Love the bars.

[@SweatzVr-r5o]

Hey Cameron. Love the videos. When are we gonna see more on the RM250?

[@liamwilson1948]

The bike is already looking great. I think not having the rear brake guard was a good thing because now everyone can see the beauty of the brakes

[@manny.9273]

Pretty sure that the guy who is ronnie mac is actually jimmy albertson

[@nubiandread4u]

Good day Cameron. I love your vids bro!! I just bought a 250cc super kart . My question for you is….. everything you do for rebuild does it apply to the rotax 257 250 as well? I need to learn how to do it all like you do. You are great man. Thanks Steve

[@eschrader]

How does that cerakote paint hold up to wear and tear? The engine covers boot rub for example

[@rawb9976]

Finally first! Love your builds man.....great content

[@jhackney210]

Looking great!

[@Bw-210]

I bought some Polisport handguards but my front brake line is obstructing it, what can I use to cut plastic cleanly without leaving rough edges? Any advice much appreciated thanks 😊 respect from 🇬🇧 uk

[@markkispeter]

That's James Stewart on the box. I got the same pants from 2014

[@jordanpanich]

Looks awesome!

[@jaker1160]

Lookin’ siiick!

[@someoneyouknow96]

I just bought 2 sets of ODI handgrips. They showed up yesterday. Cam, I forgot to ask. Who did your anodizing on the forks?

[@john-henryschwab5523]

Your jokes just cracks me up

[@-PlayMaker-]

"Just blew out the hole... not the first time I've done that..." 😏

[@clintonlied]

"It's not the first time I got carried away with the lube. Just ask my wife..." Lol

[@genysmenrunner1677]

That brushed handle bar will get stained with water? Same happens to a frame?

[@tobycutter122]

Awesome content love how the bikes turning out. When does the bike build contest start? I’m gonna be doing some stuff to my bike here soon, it got a little beat up when I wrecked it.

[@reelue2676]

Nice bike build cameron. But out curiosity would so happen to know what year your rear wheel hub is. Because on my kx125 the rear hub is quite right the rear hub for what ever reason needs 4 bearings and needed a wave rotor. And I am not sure what the rear hub on my bike is, the rim is a saxess just wondering if you might know :)

[@beardbuilds5140]

My mans out here saying shit like grease cream pie , going over board with the lube ask my wife , and I know a thing or two about blowing out some holes 🤣🤣🤣🤣 Absolute FKN legend 👌🏻👌🏻👌🏻👌🏻 Oh and the build is pretty sweet too 😝👌🏻

[@kawasakirule3707]

Great Job. 👍

[@Justin_104]

Ronnie Mac = Jimmy Albertson. 👍🤙

[@hericheelbachir386]

Ciao Cameron come stai sei veramente una grande meccanico da moto .sono contento che fai vedere a noi tutto montaggio di gruppo motore sei grande grazie

[@ProteinPounder]

your channel underrated 💯💯

[@thiagogarbellotto5259]

What kind of grease you used in te pins? We know how rubber can be damaged by greases in general...

[@kyleglassman237]

Cam, I hope all is well man. Any idea when the next video will be released! I check damn near everyday lol, yes I'm a junkie!

[@lex1945]

Great work again!

[@MintWorxTv]

Dude this video turned out sick!💥

[@Mr10usdad]

Cam are you coming to the Barber Vintage Motorcycle Festival next month to showcase your stuff?

[@Sir_Wilo]

Cant wait to see who wins this bike