TALARIA MX5 UNBOXING AND ASSEMBLY

Рет қаралды 10,936

Күн бұрын

Пікірлер: 58

@TechLineHD 3 ай бұрын

Luna Cycle makes the best tutorials. Everything is super clear, not even the smallest assembly step is missed. Thank you for your work. I used your tutorials to assemble my MX4 and Triple X, and gained knowledge to assemble other similar bikes.

@shockadellick 3 ай бұрын

For my MX-3 I'll be ordering an MX-5 controller asap

@AlexUnleashed222 2 ай бұрын

Can’t wait !!!! Just ordered !

@FYM.GBABYY 14 күн бұрын

Is it legit? Is the website legit?

@AlexUnleashed222 14 күн бұрын

Yes .

@AlexUnleashed222 14 күн бұрын

Came fast!

@DesertLifeRC 2 ай бұрын

@Lunacycle, thanks guys for making this video!!! Just got my MX5 Pro built using this video and it’s way more fun to do it this way than sifting through the manual. 🤣. Coming from years of MTB riding / wrenching, these are definitely straight forward in the build process but it’s nice to have the tidbits on tap when needed.

@CadillacCoopdaville23 3 ай бұрын

Thank you! This is great. I get mine tomorrow and was nervous it would be difficult to put together. Can you make a video on how to properly maintain the MX5?

@darenwilson451 3 ай бұрын

Thanks! I followed the same video that I used for my MX4 and only screwed up the headset spacer and put the front wheel spacers on the wrong side. Thanks to this video I was able to correct my errors. I also have my front brake line zip-tied to the front left mudguard because installing it like in the video gives me too much brake hose flopping around by the headlight. As a sidenote, I got some extra time in the garage due to having a Scud battery that I'm waiting on the replacement for. It should be here in a few days then I can finally test out the MX5!

@loganrogers5642 2 ай бұрын

Thanks guys! This made assembly an absolute breeze!

@JoeP921 3 ай бұрын

Dang you're tall! Nice shirt btw

@DirtyBob2001 2 ай бұрын

Thanks. Just assembled mine.

@tbgtbg6311 3 ай бұрын

Will the new batch still come with a fire extinguisher🙂🙃?

@shockadellick 3 ай бұрын

@tbgtbg6311 The MX-5 is so hot, it blows past eRide-Pros igniting them in flames

@johnmclaughlin4802 2 ай бұрын

😂

@tbgtbg6311 2 ай бұрын

@@johnmclaughlin4802 You Sir Are A Great Guitarist!!! Mr. McLaughlin😇

@brysonhollar 3 күн бұрын

Just curious but doesn’t the front brake line run on the inside of the fork?

@hustlasstory7611 3 ай бұрын

No grease on the axle?

@MarkFries-o7n Ай бұрын

You have the brake line routed wrong on the outside of the front fork. Needs to be on the inside.

@AlexUnleashed222 Ай бұрын

Do you guys have OEM parts for these like extra wheel spacers? Also, is it normal for a little rubbing sound for the front wheel on the desk? It’s not terrible, but it will probably just wear off.

@PTMG Ай бұрын

Can you confirm whether the mx5 drain plug is reverse threaded or not? I've heard reports that the new gear boxes are reverse threaded, causing people to strip it (thinking it's standard threaded) If true why tf would they do such a thing? Seems arbitrary, and more expensive (and more likely to completely destroy the most vital component).

@lunacyclerepair Ай бұрын

kzbin.info/www/bejne/eGbRlKargbFgabc Here is the steps for oil change on all models with a GB. No reverse threads.

@AlexUnleashed222 Ай бұрын

Do you guys have OEM parts for these like extra wheel spacers?

@casesaanthony 2 ай бұрын

Hey I ordered a kickstand side peg bracket and it did not come with the metal back part for the kickstand

@DanielDenev-h4l 3 ай бұрын

Thanks for the good review! 🙏❤

@gilmoregibson9184 3 ай бұрын

What is the max weight capacity?? Is it good for heavier riders because the e-ride pro ss has max rider weight of 300lbs

@TheTexasDuke 3 ай бұрын

Well done ❤

@djdrake6100 3 ай бұрын

Any idea why mine came without a regen throttle?

@paulg3012 3 ай бұрын

The right side connectors should be reversed so the overlapping rubber seals face down. IMO.

@dermotmacarthur7504 3 ай бұрын

Is there a way to unrestirct the mx5 other then cutting the wire????

@tannermuhle9524 3 ай бұрын

The wire cut is super easy though no reason to not do it that way

@levitvrdik 2 ай бұрын

You could even put a switch in to turn the restrictions on or off if you wanted

@dermotmacarthur7504 2 ай бұрын

@@levitvrdik how?

@levitvrdik 2 ай бұрын

@@dermotmacarthur7504 assuming it’s a single wire, you can just run a kill switch up to the bars. I would just cut it, and run a switch to the tilt sensor for wheelies

@rumczikas 3 ай бұрын

Hopefully the right and left front wheel spaces aren’t that much different. I don’t think I paid attention when I put mine together. Might have to take it apart and check. Lol

@knoxfoster8728 3 ай бұрын

yall will be selling the mx5 brakes just like the other bikes right i need me some of them think boysssss nowww

@nickovdub6131 2 ай бұрын

5 months and still waiting for my mx4 ...by the time i get mine the mx6 might be out 😒😕😞

@johnnygonzales8934 3 ай бұрын

When will the next batch be released? I see that you guys are sold out. TIA

@zlonny1684 Ай бұрын

Idk if I’m stupid or what but my front axel will NOT move

@lunacyclerepair Ай бұрын

@@zlonny1684 axle removal can be tricky , take your time and don’t force it . If it gets damaged you will not be able to ride . Find a small wooden dowel and use that to push it out .

@zlonny1684 Ай бұрын

@@lunacyclerepairI was able to get it out

@Sting-Productions34 3 ай бұрын

Stuck on this or the eride don’t know🤔

@MauiKrouseTV 3 ай бұрын

you see the comparison video talaria boys did.. youll know what you want after watching it...the mx5 has 20 more lbs to it but the parts are 10x better. the mx5 has faster acceleration and lower charging time. mx5 is the winner in my opinion

@Sting-Productions34 3 ай бұрын

@@MauiKrouseTV yes I’ve done my research I think so too

@andrewkrouse202 3 ай бұрын

@@Sting-Productions34 after I saw the two bikes drag race it was ez to decide lol enjoy bike bro!

@Sting-Productions34 3 ай бұрын

@@andrewkrouse202 thanks!