Talented mechanic helps factory owner revive ISUZU engine // Restoring and repairing vehicle engines ► Contact Me: wtgroupvn@gmail.com Thanks For Watching, LIKE, Subscribe & Share! ► Subscribe to channel:
Пікірлер: 196
@vicferrari938019 күн бұрын
This takes throwing in a set of rings and bearings to a whole new level. 0 clearance checked, 0 honing of the cylinder bores. Did they check the ring end gaps? They did resurface the block using the tread plate on the trailer. Fine job guys. Ive torn down and refreshed a few in the dirt myself.
@amazingrestorations111719 күн бұрын
thank you
@felipesants89363 күн бұрын
Greetings from Brazil for the great work
@amazingrestorations11172 күн бұрын
thank you
@ditherdather5 ай бұрын
I'm no mechanic, but I know what lapping a valve is and why it's done. I've never seen anyone do it that way. Interesting.
@amazingrestorations11175 ай бұрын
thank you
@vicferrari938019 күн бұрын
I have done that a few times! It might make a certified wrench sick to watch though. I fixed a sbc that had the worst valve job I have ever seen done to it.. I paid a guy then threw on the shelf for a few years. Out of warranty! Last valve job I ever paid for😮
@user-cq6og4ft6x20 күн бұрын
❤❤ انت تستحق أفظل استاذ في الميكانيك ❤❤ المغترب من فيينا النمسا الجميلة 9/4/2024/❤❤
@amazingrestorations111720 күн бұрын
thank you
@benycaluyosr.91285 ай бұрын
That is how durable the isuzu diesel engine because of it is gear driven...i love isuzu...
@amazingrestorations11175 ай бұрын
thank you
@user-bs2xg8zi5rАй бұрын
这是中国江铃生产的发动机,并不是日产的五十铃发动机。
@BITTYBOY121Ай бұрын
Fantastic Job ! - I enjoyed watching you restore this engine ! - Well done 👍👍👍
@amazingrestorations1117Ай бұрын
thank you
@BITTYBOY121Ай бұрын
@@amazingrestorations1117 You are welcome :)
@peterungson8095 ай бұрын
Buy a torque Wrench it's much better than just tighten it by feel. Good video
@amazingrestorations11175 ай бұрын
Thank you for sharing, I will take note and hope you and your friends will support me
@vicferrari938019 күн бұрын
No worries mate It looks like that bottom end should be plenty tight. I might to be a bit worried about a few clearances though.😂
@lectro884 ай бұрын
You did awesome job, Not in a shop or prescission tools, just impact, drill and a few hand tools.
@amazingrestorations11174 ай бұрын
thank you
@rockyj20084 ай бұрын
And common sense
@sanchezjl14 ай бұрын
I drive one of this engines at work, Isuzu , the best ever engine Mede 👍🏻👍🏻👍🏻
@amazingrestorations11174 ай бұрын
thank you
@s..simphaly11023 ай бұрын
You done a great job 👍
@amazingrestorations11173 ай бұрын
thank you
@darrentylor54733 ай бұрын
The music you chose for the end of the video was so fitting. This engine will have lots of fun adventures!
@amazingrestorations11173 ай бұрын
thank you
@sethblackman844524 күн бұрын
what a good dizel eagine two cool ass two
@amazingrestorations111724 күн бұрын
thank you
@mountainman50254 ай бұрын
It probably would have run like that without taking it apart.
@vicferrari938019 күн бұрын
I was thinking The same.. what was the engines problem that you are fixing.. why was it taken out of service.
@samirmamedzade2964Ай бұрын
Не, если бы видео называлось "Как окончательно убить двигатель не довезя его до восстановления", лайк от меня был бы жирный, а так...
@amazingrestorations1117Ай бұрын
thank you
@raulvaldez75334 ай бұрын
In 1991 i made the same with an Isuzu 1.9 ...that's kind of engines never die
@djamoulbenlahrech28034 ай бұрын
عمل احترافي متابعك من الجزائر
@IvanSpawarotti22 күн бұрын
second glow plug looks quite new :]
@amazingrestorations111722 күн бұрын
thank you
@ammarkhaib50795 ай бұрын
جيد عمل ممتاز و ذو احترافيه عاليه شكرا
@amazingrestorations11175 ай бұрын
thank you
@user-tm6nq3ou1v5 ай бұрын
After working with isuzu diesels they do make good boat anchors .
@amazingrestorations11175 ай бұрын
thank you
@D3M0ify4 ай бұрын
You must be thinking about (fraud)ford engines
@MouhamedByad-zx5do5 ай бұрын
ملاحظة: ربط الكيلاس او (راس) المحرك لم يتم تصوره كي يفهم المبتدء لأنني لاحظتك تربطه بمفتاح الهواء دون مفتاح الوزن وحتى الطريقة التي تعودنا عليها من طرف المهندسين وشكرا على الفيدو
@amazingrestorations11175 ай бұрын
thank you
@MendesDurandRival-iv9nt5 ай бұрын
Good job
@amazingrestorations11175 ай бұрын
thank you
@keithameerali94744 ай бұрын
Good job but I think you should use a non metallic mallet in some cases instead,of a hammer.
@amazingrestorations11174 ай бұрын
I'm preparing a masterpiece. Please wait. Thank you very much
@RestorationVideo6 ай бұрын
You guys are geniuses. Really enjoyed this restoration. Looks great. The paint color looks really nice. Thanks for sharing. Looking forward to your next video. 🎉....
El par de apriete en culata y cigueñal y bielas es muy importante.
@amazingrestorations11173 ай бұрын
thank you
@phuonghachuc52315 ай бұрын
Công an nó bắt là bỏ bố luôn ấy Con này tải nâng 2 tấn hả bạn ? Cũ cũng 50tr chứ ít gì 😅
@amazingrestorations11175 ай бұрын
thank you
@rayoscroft37755 ай бұрын
Absolutely fantastic well done 😮
@amazingrestorations11175 ай бұрын
thank you
@acaciobango42405 ай бұрын
Well Done
@amazingrestorations11175 ай бұрын
thank you
@ToyotaLEngine5 ай бұрын
It's easy to do the task if you have the proper tools.
@amazingrestorations11175 ай бұрын
thank you
@ailtonsantos97315 ай бұрын
Top parabéns Brasil 🎉🎉
@amazingrestorations11175 ай бұрын
thank you
@josemartins2564 ай бұрын
Vocês são feras na mecânica faz tudo com perfeição com bastante cuidado vídeo top parabéns valeo e nois.
@amazingrestorations11174 ай бұрын
thank you
@anteneupitra4 ай бұрын
Ele nao e emcanico so um otario que faz videos por youtbe, mecanicos nao trocam as valvulas todas elas tem de permancer nas devidas posoiçoes ate uma prendiz de mecanico sabe disso, so o cara do vidoe e que nao sabe...
@alvinthomas3033 ай бұрын
Good job
@ramondb003 ай бұрын
its disassembling and assembling vid, never check valve clearances, never used torque wrench, no repair has done
@amazingrestorations11173 ай бұрын
thank you
@vijaya74485 ай бұрын
SUPER SIR
@amazingrestorations11175 ай бұрын
thank you
@kennethkuek39694 ай бұрын
that's not isuzu engine, it's JMC engine
@amazingrestorations11174 ай бұрын
thank you
@D3M0ify4 ай бұрын
It is build by Isuzu....
@erik6194 ай бұрын
said so in the engine jmc isuzu
@rockyj20084 ай бұрын
Says JMC Isuzu stamped on block
@DennisFreitas-bn7nh2 ай бұрын
👍👍👍
@amazingrestorations11172 ай бұрын
thank you
@gasonzaseyan24415 ай бұрын
до ремонта был лучше
@amazingrestorations11175 ай бұрын
thank you
@gonzalorodriguez26704 ай бұрын
Cambio de aros y metales sin medir nada, eso es una"media suela y taco".Y los torques? y luz de válvulas? Trabajo muy chancho
@amazingrestorations11174 ай бұрын
thank you
@testingaccount67334 ай бұрын
Do JMC is also with isuzu?
@MegaDirtyberty5 ай бұрын
4JB1 2.8 engine.
@amazingrestorations11175 ай бұрын
ok pro
@wojtas-45 ай бұрын
Rozebrać wszystko tylko po to by go umyć i ponownie na tych samych częściach złożyć 😆
@amazingrestorations11175 ай бұрын
It's been restored for too long, I'm afraid it won't work. Thank you for watching my video. Thank you
@koushikblog87305 ай бұрын
Tata 1109 restoreing video plz
@tdubh6665 ай бұрын
Y? There crap anyway
@russellclement20585 ай бұрын
I didn't see tappet gap set with a feeler gauge ,,,, or a hone to take the glaze of the bores ,,, you blokes might be good but you are not that good ,,
@Ihavetruth224 ай бұрын
ha ha. agree. is that tidy bowl blue cleaning liquid for head??
@mazda6sc1013 ай бұрын
To be honest I don't see significant difference here. Same EURO 0 + leaking + engine smoke. I can keep eye closed on environment/place where the service was done.
@amazingrestorations11173 ай бұрын
thank you
@Nobo-ri5yl5 ай бұрын
三菱自動車のトラック~デイゼル、エンジン~ですかね
@amazingrestorations11175 ай бұрын
ok
@Steele90264 ай бұрын
whats a torque wrench?
@generlipio57495 ай бұрын
4JB1 or 4JA1 turbo engine, boss..?
@amazingrestorations11175 ай бұрын
thank you
@rockyj20084 ай бұрын
I love all the common sense…..something lacking over here in the USA anymore
@neillamontiii29115 ай бұрын
What's an engine doing sitting in the grass?
@amazingrestorations11175 ай бұрын
It's just a way to make the video known to more people, sorry
@OppoOppo-hf4qn5 ай бұрын
@@amazingrestorations11171
@ychansebilan24985 ай бұрын
Chanel yg bagus.. memperbaiki mesin sampai mesin hidup👍👍👍👍👍.. aku like dan sub😊😊😊
@chunhighlights80985 ай бұрын
It's a JMC engine
@amazingrestorations11175 ай бұрын
thank you
@D3M0ify4 ай бұрын
Was nice till that irritating music started!!
@ibmibm6915 ай бұрын
What did he poured at 44.08?
@amazingrestorations11175 ай бұрын
oil to test to see if the fungus is leaking
@David-xw6uh3 ай бұрын
No precision tools, no adjustment measurements. It's crazy. No, thanks.!!
@mannypickard4795 ай бұрын
I’m sorry, I would never let you touch my engine. This was an act butchery.
@PhongThanh-sd8hl6 ай бұрын
😮😮😮👍👍👍👍👌👌👌👌
@jeremecrane79246 ай бұрын
You do amazing work. What do you charge to work on an engine that large just wondering I know you make a living doing this
Restoring bollocks! Just stripping down cleaning & removing old paint ! I gave up watching after the crazy valve grinding!
@casadellaruggine65504 ай бұрын
Il motore andrà anche, bisogna poi vedere nel tempo e nei km, non è stata usata una chiave dinamometrica per nessun bullone nemmeno per le parti più importanti, e neppure le sequenze di serraggio. Alla fine quel motore è stato smontato e rimontato con i suoi pezzi ad eccezione delle bronzine delle fasce elastiche e qualche guarnizione. Posso permettermi di criticare perchè pur non essendo un meccanico ricostruisco i motori pure io.
@amazingrestorations11174 ай бұрын
thank you
@ingazagrjadina795 ай бұрын
Krutoitiberestauracimatora😉🫢🫢🤗🥰🫡🤘✌️👍.
@amazingrestorations11175 ай бұрын
thank you
@natashapolanco36644 ай бұрын
Estaba muerto y lo resucitaron una nueva vida una nueva oportunidad
@LeLe-qj9ow5 ай бұрын
10 điêm
@amazingrestorations11175 ай бұрын
cam on
@SamWoAiNi5 ай бұрын
What type this isuzu engine?
@amazingrestorations11175 ай бұрын
4JB1 2.8 engine
@SamWoAiNi5 ай бұрын
@@amazingrestorations1117 thanks
@terrancejohnson40834 ай бұрын
this is scary to watch!
@koushikblog87305 ай бұрын
Tata 1109
@amazingrestorations11175 ай бұрын
thank you
@andriesviljoen43094 ай бұрын
This is rubbish! That is no reviving, it is just a clean up of a dirty engine. The motor is still not running smooth which is not surprising. Just another cheap backyard job....