Master The Flipper Zero: The Ultimate 2024 Starter Guide With All The Latest Tips And Tricks!

[@lucaswilson5036]

00:00:00 - Intro 00:00:00 - Setting up Flipper Zero, SD card, firmware update. 00:04:22 - Installing custom firmware using Q flipper. 00:08:36 - Downloading apps, installing custom firmware. 00:13:03 - GitHub repository, downloading files, using GitHub desktop 00:17:07 - Q flipper, custom firmware settings, JavaScript payload

[@szymi_yt3752]

@@lucaswilson5036 thx man, u need more likes

[@rhyswiliams3447]

🙏🙏

[@Equal995]

@TalkingSasquatch Pls pin this!!!

[@lucasbittencourt2355]

Legend

[@derrickgeorge9463]

Bro, I literally was watching your videos two days ago in preparation for my Flipper. I thought I wish he would make a new updated video. I got my Flipper in the mail an hour ago, went to watch your old start up guide and BOOM you have a brand spanking new starter guide. Holy crap.

[@TalkingSasquach]

I did it just for you!

[@Nandopra]

@@TalkingSasquach you a good guy my friend 🫶

[@stevenmadamba8250]

Just ordered my first flipper zero along with a silicone case and a wifi devboard what other tools should i get to use my flipper zero to the best of its abilities?

[@mitchelldiggs586]

Did you get you flip from a site or online seller set up, please share

[@MAGICMESHROOM]

That just means the universe is at your side so that you can HACK THE PLAAANNNNEEEEET

[@marcovmedia]

Got my first flipper after one of your videos. It gave me a fun new way to interact with technologies I use every day and learn more about how they all interface and communicate. Thank you for your efforts, keep up the videos!

[@TalkingSasquach]

That's awesome, I appreciate you!

[@TheyalwayslieD-z2x]

Be careful with custom firmware I was testing spam I have two phones and got caught up in some b l e spam hack and it showed my email on their don't know how

[@TheyalwayslieD-z2x]

You should never connected to an app to use with your phone ever just use the flipper as is

[@lewiskelly14]

Video needs chapters

[@zoutewand]

@@lewiskelly14 you need patience

[@awdwsd1]

@@zoutewand i'm gonna touch you vro💘

[@orlandoservin5492]

@@zoutewand shut up

[@Mrblud22]

@@zoutewandAnd you need to get a life ☺️

[@zoutewand]

@@Mrblud22 when did it become normal to demand a free KZbin video contains chapters

[@shiruka2758]

its been 2 days since i got my flipper havent messed with it yet this vid came at the perfect time

[@NasibRahmanKhan-p6m]

where you purchesed i did not find in amzon

[@billnyeusesmywifi]

Simple easy and straightforward. Another Squach banger!!

[@TalkingSasquach]

I appreciate you brother! Would never have gotten this far without all your help!

[@martinospapantoniou4491]

Guys for the .json repository I couldn't find anything can U send a link pls ?

[@marcbeauchamp7376]

Just a note for the Ubers-SD-Files: the repo uses submodules to link to files and folders from other repositories. Using the "Download Zip" option will leave all of those files out. So the best thing is to use a git client with submodule support. For example, with the commandline git command, use the --recurse-submodules flag when cloning to gather everything.

[@LeHunkyDory]

I have no idea what most of that means but I think I'm having this issue.. 😅 My scripts folder is empty. Although, the executable he runs at 18:10 with file name "Windows_Exfil_GSHD" I actually found in another folder..

[@danieljamesbinderystu2968]

Yeah, I did all the steps with the Github desktop as he described. But since he already had the files copied, he skipped a bunch of steps. Left us noobies high and dry. I was like "yo wtf man, how/where do I need to drag those files from?!" He completely just moved on like we already knew what we were doing lmfao. I was pissed for a minute, but I found the files by clicking around on the guthub desktop menus. So I was able to finally drag and drop them. I knew I wasn't gonna be the only one, sitting here stuck, like wtf my guy, you just jumped ship. Lol

[@Zardoz66]

always good to see the getting started videos getting updated.

[@TalkingSasquach]

Especially when I totally forgot to mention Lab.Flipper.net on the last one and flipC.org is down

[@AgustinA-p3c1s]

I think the best step by step intro video out there.

[@HotelHero]

Learning C++, Java, Python and learning about the GPIO pins is what truly unlocks this units potential.

[@sharpie882]

I know Java but I’m a 1yr comp Sci student; what can I use it for here?

[@jmr]

​@@sharpie882 The OP might have meant Java Script because Flipper supports js now however Java can be useful if you want to make an Android app for Flipper.

[@macthesmac]

This device is maxed out. Time for flipper 2 or portahack

[@h6llyw66d]

Dude probably doesn't have a clue, he just spitting shit out to make him sound knowledgeable about the flipper, hence crickets since his comment.

[@jmr]

@@h6llyw66d Or perhaps the reply got auto moderated. KZbins AI deletes comments while letting the person posting believe they were posted. Ask any creator about the accusations they get for deleting comments. I have experimented and it's frequently unclear why the comments were deleted. It even happens to creators commenting on their own videos. KZbins moderation algorithm is broken in my opinion.

[@marcoortiz3375]

thanks a lot bro i got my fz at full capacity because of you, seen your videos made me understand it all. i made lots of mistake to the point of the wifi marauder stop blinking and the flipper crash to the point of not turning on but i got it all fix and running sweet now

[@jeffro.]

Good production value. You're a natural at making these videos! Good info, I esp like that you show the desktop view of what's going on in the Flipper, instead of trying to focus on the little screen. THAT'S production value. I've s'cribed, and I WILL be following you (no, don't look now!). I just recently discovered the Flipper, and realized that, as an embedded systems dev, I can use it for all kinds of handy shit. A great tool. No, I have no plans, nor impulse to do nefarious stuff, just as a personal tool. So, I ordered one, also a great case from Amazon to keep my Flip and all my extra PCBs in that I'll be making. Good stuff, glad I happened upon ya. Keep in up, dude. 🤪 👍👍 👌

[@Destination-Valhalla]

Dude , 2 months ago I decided to finally play with my left over Raspberry Pi rigs from 3d printing with creality (got 3 bambu rigs now) now I have boxes of assorted micro controllers and modules. The journey led me to your page and DUDE it's AWSOME! Had my flipper a week and already created my own wifi dev board ..... oh and the other stuff been building robots and learning all the fun modules to play with (GPS is by far the funnest). Customed out a badass case for my CYD Marauder too...... thanks for your bada$$ videos man. I don't normally watch beginner videos since my brain works fast enough to learn on the fly but watched the whole thing ... 2 times. And others too!

[@fr33b4ndjugg]

Thank you so much for this video! I never thought I'd be capable of doing anything besides turning on my space heater and playing Tetris haha. Please make more videos like this for beginners, it was super straight forward!

[@code1017]

Must be a sign. I was about to hit the buy button and wanted to look something up when your video came up. I just made the purchase. Can’t wait and thanks for the vid!

[@josephdgoodwin]

I have seen this comment a few times and not answered. After cloning ubers sd files and copying over to micro sd. The windows exfil GSHD is my only java script file and i get an error "checking for image...---ERROR--- calling non-callable at windows_exfil-gshd .js: 20 see logs for full trace. Could you please help?

[@JesseJames-v5r]

My flipper will be here tomorrow, and i need these video's to better understand my new device. thanks you TS for taking the time to upload this video, you are holding up the flipper community along with 0day. much love

[@MrBlaine5]

how much was it?

[@Jonathannnnnnnnnnnnnnnnnnnnnnn]

Are you planning on redoing this soon? Getting a flipper for christmas and would love to have an updated starter guide from a reliable source.

[@TheTubejunky]

Tips on diy esp32 boards. I would rather make my own than buy one. However there seem to be pitfalls with compatibility. Perhaps you could do a video on that my good man. Thanks for your hard work TTS.

[@TalkingSasquach]

I did this video what seems like a million years ago, it could prob use an update! kzbin.info/www/bejne/i2LXg3iDjZJ3p68

[@Kulderzipke123]

Best guide ever🎉we making the best flipper with this one🗣🗣

[@TalkingSasquach]

We have all new tips and tricks!

[@PogChump]

Perfect timing my flipper just came in the mail. I had the memory card and a screen protector to cut up waiting on it to finally arrive

[@greaseball2425]

One of the Best decisions of ur life. It's amazing.

[@quiknasty28]

amazing info!! great video explaining the flipper! for sure looking forward to content

[@Wotan1990]

Thank you so much for this video, mate ! I am getting an error on the windows_exfil script „calling non-callable an windows_exfil-gshd.js:20 Do you know what went wrong ?

[@rubenrichardson5866]

Gonna be receiving mine soon, so excited to see what it’s capable of, thanks for the great info!

[@mgscheue]

Perfect! Ordered my Flipper this morning.

[@gavsan8825]

I’m receiving mine in about a week! Can’t wait!

[@Thesh00tinggallery777]

Thank you so much for making this video! It was Uber helpful for starting out with a flipper

[@FulcanelliTrismegistus]

Great content like always! Chapters would be great to add to the vid so when we replay the video we know exactly which section we want to go to

[@taki1]

I tried downloading the scrips for javascript and it didnt work, could you please tell me how to download bad keyboard java scrips?

[@kikiboss7427]

my saved remotes on the flipper wont load did i do something wrong i am on the flippers release adn everything offical i downloaded then files from your video and extracted them all and put them on the sd card like u said any idea what i did wrong

[@45KevinG45]

Stumbled across this channel and its awesome. Now im subscribed and looking to buy a flipper

[@TalkingSasquach]

Hell yeah! I appreciate you!

[@mannyfresh2deff]

Had my lil flipper for yr and man the things u can do..and then havin videos from guys like talkin sasquatch thanks a lot.. keep up rhe good work..

[@josephmiles6694]

I installed all of your GitHub files onto my SD card the same way you did but none of the files work once moved over.

[@Supercazzola]

Hey Sasquach, would you mind telling me which 3D model you printed for the case? appreciate it !

[@Oraclelele]

i have already existing files from awsome flipper. If awesome flipper added more stuff to their data base say ir and sub-gz, do. I have to go over each individual so it doesn’t copy over twice or can i drag and drop and not worry about all the files being copied for the second time while adding new files

[@drjosephs347]

Thanks so much for this beginner video (and all of your others). There would be zero chance of me getting my WiFi dev board up and running not to mention getting custom firmware installed!

[@datboiplebs3029]

finally got my FZ and the Momentum site doesnt work lol might need an update video...there also doesn't seem to be a wifi app in your repo

[@TalkingSasquach]

Momentum site is up, momentum-fw.dev/ . I don't really have any apps in my files, since you'll get those with your firmware!

[@datboiplebs3029]

@@TalkingSasquach thats weird. i can't reach the site

[@EverythingisBinary]

Thanks for the video ! I saw you on the David Bombal's channel some time ago. I will be watching a lot more of the videos you have. Liked and subbed ! Keep doing what your doing. 🙏

[@proton7113]

If I record a signal and it is stored on the sd card. Will it be accessible if the firmware changes? Are the apps all compatible with different firmware? Thanks

[@AcuraInteg69]

My flipper is coming tomorrow. Super stoked. Love the video!

[@ThrowawaySauce]

quick note to make. it may be a good idea to disable your systems antivirus before downloading the scripts from github @14:30. waited 20 minutes for mine to download just to have windows defender just delete half of the files.

[@DLLION]

So I am just now setting up my first Flipper Zero and I am at the stage to DL all of the Github files. Issue is is my PC is just saying Trojan this and Trojan that. Is this typical?

[@TalkingSasquach]

Yup, dont worry about it. Also don't run those BadUSB scripts on anything you're not actively testing.

[@DLLION]

Thank you. And def will not

[@jonathancruz3701]

Wich is better, momentum or unleashed?

[@Quickeyz]

Holding that boot button while connecting the usb cable while mounted on the flipper running unlshd and here's what i am getting: Connecting... Error: Failed to execute 'open' on 'SerialPort': Failed to open serial port.

[@Ale-m5b]

Sasquach... very very nice video! I just wanted to ask you if you could give me some advice. I followed the instructions all the way to flashing, and my GPIO board does not read anything. Perhaps I made the mistake to go through the process again and flash another time. what could the the reason for not reading access points? Thanks a lot!

[@timh7931]

Getting mine soon and was curious how much you can do with out of the box standard firmware. I'm mostly interested in universal remotes and rfid stuff and sub GHz for daily use. Seen videos saying you HAVE to get custom firmware like xtreme but I typically don't like messing with things like that, unless I'd get bored with standard too soon.

[@fmonsterrr]

I get mines today. Been watching alot of your videos

[@jasondevault5066]

Just found you in my feed 👍. Where's the reputable place to buy a flipper?

[@TalkingSasquach]

If you're in the US flipperzero.one/ is the place!

[@General-error0]

What about UK

[@victorrqxt]

@@General-error0 JOOM basically works everywhere,costs like 160$ too

[@Blufyy0423]

This guide really helps me and I'm wondering that do I have to copy the files to SD card again if I changed to another firmware and back to momentum or there's an update, thx!

[@OneAndOnlyZekePolaris]

Me, I like them all and I hope more devs out there create more wonderful CFWs

[@Bubba-23nineteen]

I don't know how I got here from locksport videos. I have no idea what I could use this for, but this looks awesome... "Good soup"

[@Wes61]

If I extend the Subghz freq Band will it damage my flipper with normal/short usage of those additional bands?

[@BrAnarkey]

Just got mine a couple weeks ago so I’m definitely using this

[@abnpanzer8229]

Have had mine over a year now and keep coming back to your updates. Much appreciated. Quick question as I am now aparently doing something wrong. When I run the Windows_Exfil-GSHD.JS script... it opens and runs... but the text file doesnt 1) show near the same level of data and 2) no name/password. Any Idea what may be causing it? Looking forward to your next video as well! thanks.

[@alecm5170]

@TalkingSasquach Awesome video buddy, thank you! Upon following the steps to copy over the files from your GitHub repository, it seems there are already files with those same names on my flipper... should I replace those with the new ones, keep both, or just keep the oldies? (Not sure if this matters but I am on a Mac)

[@termometer3]

Can you use it to shut down bluetooth speaker at people who live next to you? Or you must first scan device into flipper first /? Or can i use bluetooth or wifi to connect and shut them down ?

[@baileysalvatore5332]

Whats the linked for the unleashed software i want to update it but i cant banned ages ago from the discord thanks

[@mongozzz]

I'm missing the "WiFi" option under Flipper Zero Apps -- anyone know why?

[@StreamingInSeattle]

This was a great video, but I'm not sure how to locate / view the files once I disconnect from the PC I exploited -- What folder houses the Txt File from the Payload Deployment when I move to a new machine? I can see it in explorer on the initial machine after the exploit is ran, but I cannot find the file once I disconnect and move to a new computer without running the exploit again on my computer locally.

[@GAFK471]

great video, just 1 question if i dont have a SD card adapter. Could i just use the Q flipper app and dump all the files in or do i need to know which files go where?

[@Freedom_and_Democracy]

Does the flipper have alert sounds or operation sounds? I heard some chimes near my apartment.

[@jmr]

I'm no beginner but I picked up a couple tidbits still. Great video.

[@TalkingSasquach]

Whenever I make these videos, I make sure to add in stuff that I've never talked about before. I also updated my files as well

[@Marcmaster2009]

Great Videos, how do make the Flipper transparent in the Flipper Lab ?

[@TalkingSasquach]

So that Flipper is actually transparent, but you can actually spoof it in Momentum Custom Firmware I'm pretty sure

[@dominiopublico1881]

Hey bro, thanks for all you do for us, I've followed the steps for installing momentum, nonetheless, when I want to install your files, on the video you copy the url but cannot find where to press to get the FILES option so I can clone it, tia for your answer

[@auvianalawson2266]

Hi. just here to say I am in love with you. You made so many things so much easier and awesome. I am happy to now subscribe to your channel and stalk you on all social media to learn your jedi ways. Thank you so much for how well formed your video was and easy to follow. This was a great start to my flipper journey. Keep on keepin on because you kick ass at it.

[@thatguyaust1n637]

Would you know why I don't have a WIFI Folder? Marauder works through the GPIO folder though.

[@Tips-r-us]

did the update as explained, but when i go to momentum, I get a popup says wants to connect to a serial port? I am on a mac, any clues how to over come this?

[@Huhh-db9wq]

When copying and pasting from your repo to flipper sd do i merge the apps or overwrite?

[@Huhh-db9wq]

New to this still learning

[@DJsparky2008smm-electrical]

on a flipper 0 how do i cgange from RADIO STACK from LIGHT as i have limited fuctions well in this mode please help THANKS

[@jesseschers9566]

Hey! love your video's!! Could you do a seperate video on how to install Java scripts like you did on 18:00 ? I tried it but it didn't work...

[@BINX-RR]

Me either, the scripts folder is empty, you get it to work yet?

[@jc2active]

im a little late to the party here, but how did you get the wifi folder and whats in it?? i've done everything you asked from the video

[@thatoneguy7566]

What’s the use of a flipper? I’ve been seeing ads for them & would like to buy one as they seem cool but I’m no tec guy . Would it be worth the $170?

[@granpajestaz292]

Appreciate you bro you got my sub this is the second install vid you have helped me with only had mine a month and a half

[@3nertia]

Where'd you get the clear case for your Flipper Zero?

[@TalkingSasquach]

PCBWay!

[@3nertia]

@@TalkingSasquach Where are the .stl files or whatever for it?

[@maltestephan8913]

"Why can't I flash my Flipper after using the Freeze Flasher and uploading the latest version 1.0.0 Morada to my board? What could be the reason? What might I be doing wrong? Can you give me some tips? Thanks."

[@Dudleydogg]

Where did the Pet NFC go still there and some of the folders were not in expected spots.

[@Rem1Xlv]

do a video on how to connect esp32+gps(with marauder) to do flipper zero wardriving

[@TalkingSasquach]

kzbin.info/www/bejne/oIfEhqR6a9KMnNU I did that a little while ago!

[@Passawa]

Mr.TS How can I determine if my Flipper Zero is an original or a duplicate?

[@donaldreid4193]

So when I try to upload Ubers SD Files when I go to it on the flipper most of the folders are either empty or the selections have question marks next to them. How can I fix this?

[@MH-xv2ed]

i am so lost. what exactly is the FZ for? i ran into this because i was looking for a way to open the gate to some tennis courts at the hotel near me. theyre charging $40 to use tennis courts for 2 hours and they give you a key card to open gate. will the FZ help open this gate?

[@quikdraw5203]

I appreciate you, i had no idea how to use this bad boi, now i have a a slight idea! 💡

[@jazzmoney4520]

My pc don’t have an as card slot ! Lol ! What’s the time consuming way ?

[@ikhouvanfortnite]

20:24 do i need to first flash it with the website and then flash that custom firmware thing with the app on my flipper like he does at 21:46 ?

[@Nightwing117]

I know that this is quite new, but can you make a guide on how to brute force?

[@jedi6185]

So I tried running the Windows GSHD script like you said in the vid at 18:13 but when I ran it PS did not open, and oddly Adobe Digital Edition opened... any ideas whats up with that? Also, where do we get all those other scripts you had on yours? TIA

[@Monkey7c]

Where can I find some of the gpio extensions or rather mods for my flipper?

[@Luclo233]

thank u bro, as always... greetings from Argentina

[@DeckUser1]

I just got another flipper after i left my last one in the washer. Perfect timing xD

[@DeckUser1]

I'm going to do the rgb and transparent mods soon

[@TalkingSasquach]

That's awesome! Hope you saved your old Flipper, you can practice on it!

[@bergamt]

Ironically the flipper does not like getting wet 🐬

[@jaredwolfe4042]

Rule 1: don’t tumble dry

[@DeckUser1]

@@jaredwolfe4042 gotta dry after a wash

[@dangerclosemofo6306]

In your last hacking WiFi video you installed a driver before flashing marauder on to the official dev board when using stock firmware but in this video you didn’t, do we not need to install the driver anymore? Great vids btw, best around.

[@AlexAlfarii]

It would be possible for you to give me the link where you install wifi marauder directly from the flipper to the sp32 development board please

[@diziscurran]

Tesla option is coming up transmission is blocked. Can we get a fix for that

[@Yuliakatmuse]

why do you recommend momentum?

[@monasser98]

What is the top or best firmware for flipper zero ??

[@TheLeopulido]

How do I change my region.. I want to control my ceiling fan but when I emulate, my kiddie dolphin fried reads “not allowed in my region” please help.

[@RowanBlackFx]

my computer micro reader is not working. is the a way to download Sasquach files directly to the flipper

[@Flobd]

If i got sandisk extreme 256gb it gonna work? Like on some devices it doesnt work

[@RichardPeterson-h1m]

What case did you print for the dev card? I've never been a big fan of exposed cards.

[@TalkingSasquach]

www.printables.com/model/179910-case-for-flipper-zero-wi-fi-module-v1 there are a few variants

[@myname-mz3lo]

the best firmware is not subjective ... xtreme and momentu are the best period . objectively

[@davidtreestone6478]

Can I add more files without a desktop? I'm not currently able to access my pc and was hoping there's a way to do it with just a phone.

[@joebotz1243]

I was wondering the same

[@Lyxres_fr]

I feel like you're repo isn't complete why did you remove the media player files :( the bad usb folder is a bit messy

[@TalkingSasquach]

People were complaining about how big the music files were so I pulled them. BadUSB folder is def a little messy, but its a start. Hard keeping up on all the files and making content every video. I used to just point people to Uber's repo, but this made it easier for people

[@Lyxres_fr]

@@TalkingSasquach 🐬