Tamiya MFC-01 installation tips for the King Hauler

Basically shows you what's needed to get your MFC-01 up and running. The box comes with many extra parts .

[@TeriWilde]

I leave the seats in and put everything in the Sleeper Cab.... and wrap up the wires so it's not a mess.... I do a lot of "How To" videos on my KZbin Channel showing how to set up and use the MFC-01 & MFC-03....

[@cmnyj2880]

Teri Wilde do you have a video of the wiring you did. I looked on your channel but didn't see it. then again i looked on my phone.

[@demofilm]

I like the looks of that plate on the back nice,

[@thewizard1196]

That sound is that little black switch on the mfc unit

[@romeromero373]

This helped a lot

[@oldwestrnwear]

there is a small white switch next to the two screw adjustments flip it up once and it will change the blinkers to blink both

[@cmnyj2880]

yup, thank you. i figured it out.

[@romeromero373]

This helped

[@tjw540]

How to install a Volvo FH16 Globe Trotter 750 tow truck

[@madtopp]

just a observation you can keep the interior with the mfu I have managed to keep mine in my grand hauler. for the indicator try 're training the mfu with your transmitter if it don't work then factory reset it and the train again. Do you have the fifth wheel servo cause if not the coupler plate ain't sitting rite that could just be the spring not located properly.

[@cmnyj2880]

I fixed the indicator it was a switch on the MFC-01. As for the seats I may rework it. Thanks

[@welsonnogueira1755]

Witch servo for this truck?

[@user-oj9zg8zy2n]

Hi when i try and set up my mfu o1. I press the little white button and engine stops and light keeps flshing so i cant go though the sequence. Am i doin something wrong all plugs are in the right places.

[@tamiyaclodbuster]

Is there any way to use a external speed controller?

[@simonhodgson2212]

Hi would it be possible to tell me how u get the lights to work on truck from the transmitter. .the lights work on the control panel but not from the transmitter. .help..

[@cmnyj2880]

Move the right trim to the bottom then move the directional stick down to the bottom.

[@191150john]

advise please im fitting a mfu im confused about j20 wire states colour yel yel bra....what is bra? thanks

[@cmnyj2880]

J20 is for the roof of the cab on the king hauler. The outside 2.

[@michaelchristianson3179]

Brown

[@cres29]

Does the mfc 01 provide a power source for the receiver? I see in the diagram all the connections for the different channels but didn't see where or how to power the receiver

[@cmnyj2880]

The Receiver does plug into the MFC-01, everything runs through the MFC-01. It's very cool addition to your Hauler

[@cres29]

I see where the mfc 01 plugs into the receiver in the channel ports but don't see anything from the mfc 01 to plug into the battery port of the receiver

[@cmnyj2880]

The MFC-01 Connects directly to your battery, thus giving power to the receiver, the Receiver plugs in the MFC-01 and the servos plug into the receiver as well.

[@rebeccabridewell3299]

i have searched and searched and cant seem to find a simple answer how does 1 get the coupler (support legs up and down) to work and not the horn :(

[@cmnyj2880]

The Left side of your transmitter, slide the bottom trim all the way to the right. then move the throttle stick to the right.

[@rebeccabridewell3299]

omg finally woohooo thank you

[@williamsantiago7303]

I put my globeliner together and then I wanted to buy this kit and when I saw how much they want for this I said to myself that my truck WILL NOT have this installed on it because the price that they want for this is highway robbery. They are out of their damn minds, i'm sorry but that's how I feel. Its bad enough how much the truck itself is and it comes without receiver, servos and radio and then they want another two hundred plus for lights and sound, they must be crazy. One hundred bucks for this kit is still to much. Great video bud, it's very informative but I just don't see spending that kind of money on that. Take care bud.

[@michaelchristianson3179]

William, the truck and MFC is worth every penny. It is not highway robbery you just can't afford it. I have 3 trucks all completely outfitted and over $1500 apiece. It is a very expensive hobby.

[@williamsantiago7303]

@@michaelchristianson3179 Micheal, do you know who I am? No you don't so don't tell me what I can't and can afford. I think it's very rude of you to say what you said. If you didn't like my comment then you shouldn't of commented back on it. If only you knew what I did for a living and how much money I make you would take back what ya said.

[@michaelchristianson3179]

@@williamsantiago7303 sounds like someone got a little butt hurt. Suck it up buttercup. If you make the money, whip out the card and get the MFC.

[@williamsantiago7303]

@@michaelchristianson3179 No the one that is butt hurt is you because you came out with the childish comment " you can't afford it." That's something children say when they get butt hurt and that's what you are lad. You have a good day lad.

[@michaelchristianson3179]

@@williamsantiago7303 trust me, I'm not butt hurt. Lol. If you need help paying the rent, hit me up. I will buy that truck off you. Cash money. Let me know.

[@michaelchristianson3179]

Bill. Please join our Facebook page. Tamiya Truck Open Studio. We would love to help you and share tips and stuff with you as well. They make brackets to install the speaker in the front under the hood. I hope to see you there.

[@NILOKONOSKO2002]

IT IS BETTER TO USE APPLE's horns they are improve hard sounds It can put the seats

[@manvirsingh3675]

Which radio control did you used ????

[@cmnyj2880]

Attack 4YWD 2.4G Bought from Towerhobbies

[@gabrielstefano3103]

sim