Tamiya Rock Socker CR-01 Step 12 Checking the RC Equipment

Hi RC Enthusiasts
Welcome to my channel and thank you for taking the time to view this video.
This is the Tamiya Rock Socker on Tamiya's answer to a crawler chassis. This awesome model comes as standard with a 540 size motor, a single speed centre gearbox, the ability to choose to have locked / unlocked front & rear axle differentials, front & rear barrel spring, with separate oil shock absorbers, metal chassis rails, four link front and rear chassis links, soft tires and detailed plastic bead lock wheels, the ability to choose to have the optional four wheel steering option, part ball bearing and part metal bearings and a highly detailed polycarbonate body.
If you would like to see the previous steps of the build, please visit:
1. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Chassis Unboxing
2. • Video - Tamiya Rock Socker CR-01 Chassis Introduction
3. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Link Mounts
4. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 2 Attaching the Link Mounts
5. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 3 Mechanism Deck
6. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 4 Ladder Frame
7. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 5 Differential Gear
8. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 6 Drive Shaft
9. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 7 Axle Housing
10. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 8 Attaching Suspension Mount
11. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Step 9 Coil Spring Mount
12. • Tamiya Rock Socker CR-... - Tamiya Rock Socker CR-01 Steps 10 and 11 Attaching Front and Rear Uprights
If you liked my video, please do consider subscribing to my channel, this really helps my channel. I always appreciate the support of fellow RC enthusiasts. Keep well and all the best to you. See you again soon.

[@SevenWelt]

Hello,

[@JoevsRc]

This is a very important step . Nothing like having to pull the servo out after it was installed because i forgot to center the steering servo LOL

[@maxmixrc]

Great build video, nice checking my friend 😊👍💯

[@HaydadRC]

Excellent proactive check of the electronics before installation John!

[@AdventureTimeRC]

Good stuff John I did a lot of modifications to my steering I have a aluminum servo arm on it now trimmed a few bits and got a good bit more steering

[@G9RCCar]

Great job, my friend.

[@Fortes_RC_Adv]

Almost done💪😉

[@countrycrawlers4713]

Great build as usual! Best wishes to you and your family!

[@rcdave47piges]

Hi John great build

[@RallyandTrail]

Nice one mate 😎 Getting close now 👍🏁

[@MarkBryanRC]

Oooh John, those sprigs are hard to get onto the servo saver! Funnily enough I just fitted one of those to my XV01. And centering the servos is definitely an essential step! Good work my friend, I hope all is well - cheers! 🍺😎👍

[@RcNickster709]

Nicely done John. AnImportant part of the process for sure. Once again watching while I work On my own rig. :)

[@RCBirds]

Great job John. Great you're you going for the 4WS version

[@mikesrcgarage]

Nice John I dont get along with servo savers... Lol! AWS is too cool! And if you put the servo saver up front you should be good! Very nice buddy, all the best to you and yours buddy! ✌🏼😎👍🏼

[@MauzyrockRC]

I have not yet ventured into the double servo vehicles...Interesting to see how folks center the servos. I usually fit a horn on temporarily, trim it, rinse repeat until I am satisfied, which usually minimizes trimming after install. Cheers

[@sparetimerc]

Hey John, that Servo saver seems to be a very strong one. Do you think you can install the other servo without a servo saver? The build is coming along. I can't wait to see this completed and on its first run 👍👍 Take care and best wishes to you and the family 💯💯💯

[@FastFreddyRC]

I like how I'm seeing the metal servo saver setup! Definitely makes sense for a vehicle like this and I'm glad you're doing the 4WS option. Question...what's the tire compound like on this one? As it's designed to be a crawler just wondering if the tires are nice and soft.