Рет қаралды 908
Hi Folks. This is a photo montage of the build of my Tamiya Toyota Bruiser. I got this kit in 2015 and at this time I was still working so it took me a couple of weeks to build as it is quite complex with a lot of metal parts including wheel axles with diffs and a three speed gear box and transfer case. It was also way before I started to post videos on KZbin but because of the complexity I decided to Photograph the steps. So there is a photo of each step from the guide, then the parts required and finally the finished item and I have also added some commentary.
Hope you enjoy!
Specifications
Item No 58519
Length: 525mm, Width: 278mm, Height: 275mm, Weight: 3.2kg
Tread: 200mm (Front), 218mm (Rear)
Wheelbase: 287mm
Tyre Width/Diameter (F/R): 60/123mm
Type 540 Motor
Longitudinally-Mounted Motor Shaft-Driven 4WD
Front & Rear 6-Pinion Differential Gears
Front & Rear Oil Dampers
Gear Ratio; 1st Gear=1:54.63 (4WD), 2nd Gear=1:40.49 (2WD), 3rd Gear=1:27.92 (2WD)