TANGO 2 how to setup RSSI 12 CHANNLES AND CRSF

Yes another one about the Tango 2
(you know me if someone asks)
Hello, if you like my content please consider supporting my channel with the links below. Or you could Buy me a Coffee 👉 www.buymeacoff...
AFFILIATED LINKS
DRONE AUTHORITY - droneauthority...
BANGGOOD - uk.banggood.co...
=========================================================
BELOW IS A LIST OF MY FAVOURITE GEAR TO RIP WITH
MICRO QUADS / ALL SUB 250g
GEPRC CinePro 4K HD www.banggood.c...
GEPRC GEP-CX CYGNET 145MM www.banggood.c...
GEPRC GEP-PX3 www.banggood.c...
UK/US 65 WHOOP www.banggood.c...
=====================================================
5INCH QUAD
GEPRC GEP-KX5 www.banggood.c...
=====================================================
ON MY HEAD
SKYZONE GOGGLES www.banggood.c...
ORT MICRO PATCH www.banggood.c...
======================================================
SOME MORE AWESOME FRAMES TO CHECK OUT
GEPRC MARK 4 www.banggood.c...
GEPRC CINEEYE www.banggood.c...
GEPRC PHANTOM TOOTHPICK www.banggood.c...
GEPRC MARK 4 HD5 www.banggood.c...

[@csselement]

Brief, simple, and clear. Thanks! Wish more videos were like this.

[@GeorgeCooper_LoneWolf]

Thank you. Glad you liked it

[@bianchispurs]

Thank you so much for your short and simple video's! I have a short attention span and I can follow you!Now I have RSSI !

[@GeorgeCooper_LoneWolf]

Great to hear!

[@SwellDrone]

Thank you so much for this video. I was having a hell of a time trying to get my tango 2 button c / aux 5 bound in betaflight. It turned out that my nano x was set to 8ch. and not 12 ch. Thank you!

[@GeorgeCooper_LoneWolf]

You're very welcome, glad you found it useful 🐺

[@nitronut1723]

George, Nice video this is helpful to me. I just updated to crossfire ...tired of having all this program nonsense on FrySKy gear. My Tango 2 has problem with low RSS readput 50% with quad just a few feetout. This video and comments section have been a great resource for tracking down my issue. Thank you for posting.

[@GeorgeCooper_LoneWolf]

Thank you happy to help. Glad you got it sorted buddy..

[@GhostFpv]

Answered exactly what I was looking for. Thanks !

[@GeorgeCooper_LoneWolf]

You're welcome!

[@HomeDronen]

That's an awesome little transmitter, wished I could afford it. Great detail on setup...cheers!

[@GeorgeCooper_LoneWolf]

Thanks mate

[@propgear123]

Awesome as always bro great detail and easy to follow it with you bro. Looking forward to getting your impression on it and x fire in general when you have had a few months use out of it 🙏🙏👊

[@GeorgeCooper_LoneWolf]

The way the bloody weathers going it could be a few months before I get out again lol Cheers Bro

[@doktordrone]

Thank you so much, George 🙏👍😁🙏❤️🥃

[@GeorgeCooper_LoneWolf]

You are so welcome buddy

[@doktordrone]

@@GeorgeCooper_LoneWolf i just didnt understand why my rssi is only 45, can i double it? i have followed your instruction in this video 😁🙏

[@GeorgeCooper_LoneWolf]

@@doktordrone. That's strange I have heard of that happening with other receivers but never a Crossfire. First of don't panic it's probably reading in DBM so your still getting a full signal even if it says 45% so you could just leave it and fly as it is and work out your range (eg. if the RSSI drops to 23% think of that as about 50% as normal. However, there is a way to change it in the command setting but it's hard to explain. I will see if I can find a video showing you how to do it. But as I said don't worry to much you can still fly.

[@doktordrone]

@@GeorgeCooper_LoneWolf thank you very much for this useful info, George 👍🙏❤️🥃

[@GeorgeCooper_LoneWolf]

@@doktordrone Hi buddy I bet you thought I had forgotten about you lol Hears a link to recalibrate your RSSI to 100 It doesn't work on all flight boards but give it a go. kzbin.info/www/bejne/mKebn5mplpuCjZo

[@ktmjay9920]

Great video 👍

[@GeorgeCooper_LoneWolf]

Cheers bud

[@RODPIKERDRONESUK]

Thanks for sharing cheers 👍

[@GeorgeCooper_LoneWolf]

cheers

[@shanedownhill]

cool thanks

[@GeorgeCooper_LoneWolf]

Your welcome

[@TheIncocognito]

hi i did exactly what you said, and my RSSI is a 8 porcent, why?

[@GeorgeCooper_LoneWolf]

Sorry to hear this. But without seeing your set-up it's hard to say. However see if this link helps. kzbin.info/www/bejne/bmbGnZ1_a7R7gcksi=UUoMYz4_MsSnD67T

[@ak-lk2nq]

Hi George, In my tango ch8 is LQ, and in Beta Aux 4 is Rssi ? thank you

[@GeorgeCooper_LoneWolf]

This is an old video now and a lot has changed --- LQ is much better than RSSI and you should be using it if you're using Crossfire. But on your T2 you can choose either or both at the same time as they do slightly different things, however, I only use LQ... Check out these links below, the first one by Bardwell and one from me. kzbin.info/www/bejne/bmbGnZ1_a7R7gck kzbin.info/www/bejne/jHzPp31vpdmmiLs

[@ak-lk2nq]

@@GeorgeCooper_LoneWolf hey. Thanks a mill, i thought it was the update again 😃. Btw had to refreash the update on XF in agent x as you said before i was able to push update on cross fire.

[@GeorgeCooper_LoneWolf]

@@ak-lk2nqYou're welcome, glad you found the info useful 👍

[@ptru]

This is what I was looking for. Thank You. I have just one question. If I have GPS rescue set as failsafe in BF should I still set failsafe in the Nano RX to “Cut”?

[@GeorgeCooper_LoneWolf]

Yes always. There are a few reasons why, but rather than going into a load of stuff, it's highly recommended to have it set to cut and leave it. Glad you found this post useful. If you're interested I have a playlist this a few more info videos about the Tango 2.

[@ptru]

@@GeorgeCooper_LoneWolf I will check it out. Thank You.

[@slapstickfpv]

Hi George, great video. Which additional wire would I need to put in to get rssi on my crossfire? Thank you

[@GeorgeCooper_LoneWolf]

Watch the video kzbin.info/www/bejne/hHaQimSoh5qSq5I it has all the info for wiretapping up for crossfire also crossfire comes installed with rssi to set it up is simple hears another link. kzbin.info/www/bejne/qaakooWeZ8uip5o hope this helps

[@CarbonGlassMan]

Why would someone just want 8 channels instead of 12? Is it about latency? If so, what's the latency difference? I've been beating my head against the wall over setting up a switch in channel 9 on my X9 Lite and Betaflight not allowing that to work as AUX 5. So I changed the CF receiver from 8 channel to 12 channel and the AUX 5 works in Betaflight now, but why is 12 channels not something everyone wants to do? 4 channels are taken by the sticks so that means only 4 switches are able to work if you stay on 8 channel. Most radios have a lot more than 4 switches. I want to keep my arm, beeper, mode and crash flip switches, but I also want to control my VTX power on another switch, so I am going to have to use 12 channel, but again, why doesn't everyone want that?

[@GeorgeCooper_LoneWolf]

It's to do with ( power / band width / latency ) Imagine a radio that only has 1 channel, the battery will last longer because it does not have to do much. The bandwidth will be super strong because there's only 1 and there will be no latency. Now Imagine all the information you send through the air from your Radio to your model has to travel through an invisible tube in the sky, the more stuff you try and push through the tube the greater the chance the tube will get clogged up (SORT OF) So the more channels you're using the more problems you may get (Right) Nooooo "WRONG" this would have been the case on older radios but nowadays the radios are so high tec you won't even notice. However, to answer your question why would someone just want 8 channels ? if you are a new pilot and your first radio has 12 or more channels it could get overwhelming, so I think that's why the Tango 2 ships set to 8 channels.

[@CarbonGlassMan]

@@GeorgeCooper_LoneWolf Thanks. I should be able to go to 12 channel and use all of my switches and the pot with no problems. Maybe slightly less battery life, but my radio seems to work forever as it is and I carry spare 18650 batteries anyway for my goggles and radio. Thanks for the explanation.

[@GeorgeCooper_LoneWolf]

@@CarbonGlassMan 👍 No problem buddy

[@E3GKintalo]

How do I fix incorrect values. Rssi shows 80% and lq shows -31, 6 feet away.

[@GeorgeCooper_LoneWolf]

It sounds like you need to calibrate the RSSI It would take me to long to explain it so check out this link it should help kzbin.info/www/bejne/mKebn5mplpuCjZo

[@WBBlocker]

New to crossfire-what would be a reason you need 12 channels vs 8 channels?

[@GeorgeCooper_LoneWolf]

To add more functions. The first 4 channels are taken up for controlling the model such as throttle and yar. that only leaves 4 channels and once you add a buzzer and a GPS you only have a couple left, so if you what to add more functions such as rate change / OSD switch / in-flight PID adjustments and more. then you need more channels, just like any Transmitter, not just Crossfire. Hope this helps

[@WBBlocker]

George Cooper that makes sense-thanks.

[@GeorgeCooper_LoneWolf]

@@WBBlockerYou're welcome buddy