TANGRAM Progression Knife Sharpening with Tormek

[Sharpening Store]
smartstore.nav...
[Knife Sharpening Service]
smartstore.nav...
[Blog]
blog.naver.com...
[Knife Forum]
cafe.naver.com...
[Contact Us]
Phone: [phone]
KakaoTalk ID: razor
Light Awash by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: incompetech.com...
Artist: incompetech.com/

[@sharpcokorea]

토맥 및 악세사리가 필요하시면 아래 스토어를 방문 바랍니다. [스마트 스토어] sharpco.kr ["칼과 연마" 카페] cafe.naver.com/razorsharp ["칼과 연마" 오픈채팅] open.kakao.com/o/gK83Zbre [연락처] 전화: 010-3590-7543 카카오톡 ID: razor (가급적 카톡 또는 메시지 바랍니다)

[@knifegrindersaustralia5158]

Thank you for taking time to make this video, I've enjoyed every minute of it. Controlled and neat sharpening, extraordinary sharpness in the result, and your last episode of cleaning the Tormek after use is the cherry on the cake.

[@sharpcokorea]

It would have been impossible without you :)

[@knifegrindersaustralia5158]

Thank you, but it is about you - you've got the talent, you can see and hear. Though my website and book have everything a knife sharpener might need, not everyone can turn those ideas and instructions into an ultra-sharp and plainly beautiful edge like yours.

[@knifegrindersaustralia5158]

I really like how neatly an cleanly you do everything - having watched your videos I realized how dirty my workshop is!

[@sharpcokorea]

@@knifegrindersaustralia5158 Thank you very much. I feel I have a lot to learn and things to improve. You are an standard of Tormek knife sharpening, so I think it's a great luck to be able to live in the same age as you.

[@travisbickle0815]

A true master at work, wonderful to watch. Thank you for sharing

[@sharpcokorea]

Thank you

[@TheBikerDodge]

I watched for about 5 minutes, then decided to watch some grass growing

[@schleifjunkieshannsplag8635]

Always if i want calm down from a stress day i watch one of Ur Videos. In a positiv way u are like a Panda Bear all Slow and step by step. As Vadim say to the cleaning of the Tormek at the End is the cherry on it. keep on Ur excelent work, i am very impressed.

[@sharpcokorea]

Thank you. I'll upload another Tormek sharpening video later.

[@mikel3269]

You are an absolute master with the Tormek! I was wondering 1.) What was the software you used to calculate the angle for honing, and 2.) Where did you get the strop you used in the video? Thank you!

[@sharpcokorea]

Hello. 1) knifegrinders.com.au/11Shop.htm 2) www.sharpeningsupplies.com/12-XL-Double-Sided-Paddle-Strop-P314.aspx

[@drakedoragon3026]

Awesome video. Thanks for taking the time to show your process.

[@dewarner12]

Excellent video. I appreciate how methodical you are in the knife sharpening process. Where did you get the containers you keep your wheels in?

[@sharpcokorea]

Hello. It just pot tray.

[@jamesanding1837]

Nice sharp knife, but I'd hate to live in the same house as him. He would drive me nuts in 10 minutes.

[@WoodyDeer]

Thank you for this video.It seems like you very enjoy sharpening on Tormek.I have a one as well,but I am not good like you.But I believe I will,after this video.. I wish you happy sharpening ! :)

[@sharpcokorea]

I think Tormek is not convenient tool so you need more practice and study. Come to Tormek forum. I learned a lot from there.

[@mike102069]

I love your rideos and I have just posted it to my tormek facebook group. Where to you get you cbn wheels???

[@sharpcokorea]

Thank you. www.woodturnerswonders.com

[@frankaloia]

@@sharpcokorea What are you using in the water as an anti-corrosive? As I understand it Woodturners Wonders indicates their wheels should not be run in water.

[@sharpcokorea]

@@frankaloia If it is stainless, no problem. But carbon steel, you should use Tormek ACC-150. I use it.

[@scottydudley5700]

I have asked before regarding the Wood Turners Wonders CBN wheels used with water. Do you dry them after use or perform and special procedures. Ken at WTW was pretty adamant about not using with water. Appreciate your time - and your videos. Thanks

[@sharpcokorea]

You can use it with water. But if you grind carbon steel, wipe water off after use.

[@koreasword]

참 좋긴 한데 그냥 숫돌에 가는 것과 시간이 같을것 같은데요. 시범자 께서 숙달안되서 그런지 너무 조심해서 그런지 아무튼 기계는 좋아보입니다

[@scottydudley5700]

Another great video. Thanks. What is the make/model of your Goniometer please? And where might I obtain one?

[@sharpcokorea]

You can find it on Aliexpress.com.

[@user-Eal68]

wonderful ....

[@maziluionut]

Cleaning your tools on the end one of the most important thing.Thank you!

[@john.home1]

Excellent video I really enjoyed it. If I may a couple of questions. What would be interesting is to see what you are looking for in the burr during the initial sharpening. I know there is a burr before you can feel it. Do you see something that indicates a burr before you can feel it? I noticed you sharpened at 15° and honed at 16.5°. How much difference does this make in the final BESS number as opposed to hand holding as shown in the Tormek training videos? Also what increase in sharpness do you see with the final work on the paddle strop? One final question. Have you tried using a paper wheel during the final stages? Again thank you.

[@sharpcokorea]

Thank you John. 1)I check the burr with naked eyes and light. 2) My freehand honing technique on the Tormek leather wheel is terrible. I think I can't get under 150 BESS. 3) I believe final finish is should be done with hands. So I used the paddle strop at that time, and now I use the nanocloth ultra. It lowers BESS score by 20~30. 4) Paper wheel? Yes, I used 10" slotted wheel only. But not anymore. I like the Tormek leather wheel much more.

[@bhuneshwarchandra1778]

@@sharpcokorea ?. मशीन काहाँ मील ही

[@granthoribe461]

I really appreciate this video. You do an excellent job of showing then correct steps , ones I can actually try to replicate on my own tormek. How do I get a frontal vertical base? How necessary is it?

[@sharpcokorea]

You can order FVB, contact to "Knife Grinders".

[@tomtd]

I use 15 degrees on my kitchen knives, using a tormek grit wheel and I polish and hone on a rotary buffing machine, not a prosaic but mighty sharp and it produces a slightly convex edge rather than concave hollow grind, this makes for a robust stay sharp knife for daily use. Not pretty but practical

[@kens4741]

Well done, Sharpco. Very solid technique.

[@sharpcokorea]

Thank you :)

[@granthoribe461]

Also, so much wonderful information and tips. Thank you!

[@sharpcokorea]

Thank you.

[@TheRobinj13]

I’m going to go and watch some paint dry!

[@pauldixon6654]

Christ I wonder if hes like that in the house cleaning that is. total OTT. Like your comment

[@pauldixon6654]

SORRY I liked your comment.

[@Mrplacedcookie]

So soothing

[@josephmetz3957]

These diamond stones, say absolutely do not use water or warranty is void?

[@sharpcokorea]

It's CBN wheel. Yes, the warranty is void when use with water. But if you are careful, you can avoid the problem. Be careful not to rust.

[@이상완-d4c]

프로님 ~ ! 육성(음성)을 추가시켜주시면 좋은작품이겠습니다.

[@sharpcokorea]

의견 고맙습니다.

[@CrisGar76]

Perfecto, 👌

[@binhluuuc2883]

Tuyệt vời...

[@vdog570]

Does this wheel give better results than the diamond wheel?

[@sharpcokorea]

Sorry, I have never used a diamond wheel.

[@charleschan2282]

Can you put the edge under a 40x telescope to see how it turns out?

[@sharpcokorea]

Course. Following is 200x view glesser.blog.me/221620190891

[@granthoribe461]

Im wondering if it is absolutely necessary to have a diamond 1000 grit stone to achieve these sharpness levels? I have gotten good results with the stone that is provided, but i need to "true" it every so often. does a diamond wheel eliminate that? and does it achieve a sharper more clean edge? thank you

[@sharpcokorea]

You can get similar score with SG-250. But if your knife is very hard steel like CPM-S110V, you should hone it with diamond or CBN abrasive. Tormek PA-70 wouldn't work. Diamond or CBN wheel is good, but I don't think it's necessary.

[@granthoribe461]

Would you suggest buying the diamond stone or the japanese whetstone? For best results with very had steel.

[@handikeramikdinoyomalang7587]

How much $

[@김종현-t2c]

안녕하세요 영상 잘 보았습니다. 토맥 XB-100 호리존탈 베이스 - TORMEK XB100 에서 수직지그 연결하는 부품판매처및 자작 가신 건지 궁금합니다.

[@sharpcokorea]

안녕하세요? 외국에서 구입한 것입니다.

[@Sergiotunes1976]

26/02/2020...quanto custa para o Brasil?

[@sharpcokorea]

I'm sorry but I don't take knives from foreign countries.

[@pillihp0631]

Does it hurt the CBN Wheels to run in water, why does it void the warranty.

[@sharpcokorea]

It's because rust. So if you sharpen carbon steel on the CBN wheel, you have to use Tormek ACC-150.

[@pillihp0631]

@@sharpcokorea are there any other specific steps other than the additive. Thanks

[@sharpcokorea]

@@pillihp0631 If you don't use additive, you should dry the wheel very well immediately after use.

[@emanueledefelice3299]

Quanto costa e come faccio per averla

[@johnkantar]

is it possible to damage the edge using the strop if not used correctly ,I've never stropped before

[@sharpcokorea]

There is a risk that the edge will be rounded if you use honing wheel with freehand.

[@theORIGINALtonasco]

Fine, careful work. But, in my humble opinion, when grinding and honing you dwell 'way too long in one spot - both at the beginning and end of the pass over the wheels. You are removing more metal at those two spots than the rest of the length of the blade.

[@sharpcokorea]

You're right. But the honing paste is average 3 micron and Tormek runs at about 120 RPM. So I think that not a big problem.

[@amazingwhooo6418]

Wow.....so richhhhhhhh

[@arishzida6090]

Nice job good can you send nam this machine or Email thank you?

[@sharpcokorea]

Yes, It's Tormek T-8.

[@kiyoungkim1125]

다이어몬드휠 대신 CBN을 사용하시는 이유가 궁금합니다.

[@sharpcokorea]

CBN이 내화학성, 내마모성 등이 더 우수하고 수명도 더 긴 것으로 압니다. 그래서 산업분야에선 다이아몬드보다 CBN이 더 선호됩니다. 하지만 가장 큰 이유는 제가 살 때 이게 최선의 선택이었기 때문입니다.

[@sean30641]

안녕 하세요 영상 잘보고갑니다. 조그마한 식당에서 고기손질을 매일하는데 연마기 t-8,t-2고민중입니다. 죄송하지만 추천 부탁드립니다.

[@sharpcokorea]

T-2는 사용해보질 않아서 잘 모르겠습니다. 하지만 건식이라는 점이 아쉽고, 연마제 없이 사용하는 호닝휠의 성능이 의심스럽습니다. 그래서 여유가 되시면 T-8이 여러모로 좋다고 생각합니다. 스톤의 직경이 커서 오랫동안 사용할 수 있어서 좋습니다. T-8, T-4, T-2 모두 최저가로 판매중입니다.

[@sean30641]

@@sharpcokorea 답변 감사드립니다.

[@서정복-i4h]

T8이랑 1000번 가격이 궁금하네요...!

[@bretgordon4927]

What’s the attachment that takes it from horizontal to vertical ?

[@sharpcokorea]

FVB. Knife Grinders make it.

[@kk_knives8449]

Tormek accessory check their website they have table too

[@sangminpark9317]

참 신기허네...

[@mike102069]

I also have a source for laser cut bads for your clamp. I f you are interested I can get you a link. THey are very good quality and very inexpensive and eliminate tape

[@sharpcokorea]

I already know that. But I believe my method is better for the perfect protection.

[@크르릉-r6u]

더보기에 있는 상점에 가도 저 기계가 없던데 판매는 안 하시는 건가요?

[@sharpcokorea]

기계는 인터넷에서 쉽게 구입하실 수 있습니다

[@sharpcokorea]

얼마전부터 판매를 시작했습니다. glesser.blog.me/221699879012

[@Ramblequist]

Hit it with the 4000 water stone

[@sharpcokorea]

I sold it. But someone give it to me, I will use it.

[@myxboxcnq]

Dull tip.

[@벅벅-x6m]

이러면 기계날 갈리나요??

[@sharpcokorea]

CBN은 다이아몬드 외에 지구상의 모든 것을 갈아낼 수 있습니다.

[@벅벅-x6m]

@@sharpcokorea 손조심해야겠내요

[@sharpcokorea]

@@벅벅-x6m 회전 속도가 느려서 손이 직접 닿아도 괜찮습니다.

[@벅벅-x6m]

그래도언제나 손조심하세여 ㅎㅎ 날붙이만지시니깐요

[@sharpcokorea]

@@벅벅-x6m 감사합니다^^