11 Cricut Mistakes You’re Probably Making

[@carolhess3781]

I have watched lots of videos and never thought I have seen where you burnish the design on the mat before weeding it. I hope that will be a great time saver, thank you for all the tips.

[@MakersGonnaLearn]

It does help so much!! It saves a lot of time while weeding!! You're so welcome, Carol!

[@Ny2SCandback]

I am a Cricut newbie. This is so informative. You have given me a great place to start and huge no-no’s that I would have made. Thank you.

[@MakersGonnaLearn]

Welcome to the Cricut world!! We're so glad you enjoyed this video! If you're looking for more beginner information don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@wilstarkey4418]

You are so right

[@DeliciaWanderer]

Lujo

[@sandrasteverson7531]

Thank you so much for your talent and sharing your knowledge. I am 70 years old, have had a cricut for some time now and totally overwhelmed. This was so much help God bless you.

[@MakersGonnaLearn]

You are so welcome! Glad it was helpful!🙂

[@partiallycrunchyfullysaved]

I just received my cricut explore air 2 for Christmas and I'm currently binge watching before I unbox it. Lol Your channel is great!! Thank you

[@MakersGonnaLearn]

What a smart move watching videos and gaining information before you unbox it!! The more prepared you are the less overwhelmed you'll be when you open it! :)

[@porchgal2733]

You and me both... Lol

[@cheergirl245]

Brand new to cricut. I watched a few different videos from other channels and thought I knew what I was doing. I’ve done 2 projects so far both of which had mistakes. After watching this video I realized I’ve made about 90% of those common mistakes. Excited to try again now that I have a better understanding.

[@lindaharrington3341]

I was ready to unload my machine. I’ve had it since Christmas and haven’t made a thing except an expensive mess. This video is so helpful. Going to give it another try. Thank you for this great lesson.

[@teonykkiastarr5099]

I have been stuck for days trying to find the right cursive font for my wedding thank you cards! This kern trick is all I need! Thank You

[@MakersGonnaLearn]

Aww, so glad you got some help!

[@terryleblanc7698]

Of all the tutorial videos I’ve watched, Makers Gotta Learn has been the easiest to understand and follow. I can’t wait to watch more

[@MakersGonnaLearn]

Aww, that's so sweet of you to say! Thank you!

[@nenealldayday8733]

Tip!! Only iron on vinyl needs to be mirrored 🤦‍♀️ learned that the hard way lol Love your channel ❤

[@MakersGonnaLearn]

definitely! Thank you!

[@angelashaw8255]

I’ve messed up a few sheets not knowing again thank you

[@xtina22e]

And don't forget to put iron on shiny side down... Wasted an entire 12×12 sheet last night, and I KNOW better! 😂🤣🤦

[@lindablasingame2438]

Best video I have seen!! Better than Cricuts! I'm a 70 yr old Great Grandmother and trying to learn. Having even attempted to use yet🙄 Thanku❤

[@ruthhyster5807]

I never thought of weeding from off the mat. I will do that from now on. Thank you.

[@MakersGonnaLearn]

Yay!! So glad we could help you. Weeding on the mat is a true game changer!

[@PrinceCharmThings]

When I clicked on this video, I thought for sure there would only be one or two of the 11 that I might be doing wrong. I was amazed at how good the tips were and how many of them I was doing wrong! I have had my Cricut for over a year and use it fairly often. I was very pleasantly surprised! We all have room to learn! Thank you!

[@MakersGonnaLearn]

Oh wow! Thank you so much for sharing that, Miss Kathy!! So glad this video helped you out, dear! :)

[@marygerringer7395]

I loved the kerning and welding tip. I couldn't figure out why the way that I created it, wasn't the way it was cutting. 💜

[@MakersGonnaLearn]

Glad you loved it!

[@MsFrances06]

Thank you. I am a new cricut user and I am so overwhelmed with this machine. I learned something new today and I am so excited. Thanks for the information.

[@MakersGonnaLearn]

You are so welcome!

[@ashleytoth8503]

Brand new to cricut: never knew to weld & never knew to move cursive up together!! 😱😱

[@amieshawilliams]

I am completely STOKED! I have watched many tutorials trying to get to know my Cricket Airr 2 and my Cricket Joy to no avail. This is the first one that has made me feel competent. Thank you, thank you, thank you!

[@MakersGonnaLearn]

Our pleasure!😀

[@CarlaHMaryKay]

I’m a pharmacist. Bottles of alcohol are still hard to get but we have plenty of alcohol swabs. I box of 100 is usually just a couple of dollars. One swab will easily clean a cup.

[@MakersGonnaLearn]

Great tip! Thank you!

[@21worldview]

Yes! That's what I've been using. Cheaper and available.

[@trevahillyard2307]

LOVE this tip, thanks

[@RachelSzmed]

Yes! I have a box in my craft room. No spills!

[@MsNailgun]

The dollar tree has them for a buck a box. I buy a few boxes here and there to stay stocked up.

[@laurieherndon251]

This is the best video I have watched. I have made many of these mistakes and have been frustrated. Total game changer. Thank you thank you thank you!!!

[@MakersGonnaLearn]

You are so sweet!! I'm so glad this helped you!!

[@margiewelch2068]

Been cricuting for 10 years. Love the advice for weeding on the mat, the reminder of what needs to be cut on each mat, and changing the pressure! I kearn my fonts but the way you did it was far easier! Bravo and thanks!

[@MakersGonnaLearn]

Aww, I'm so glad you enjoyed this, Sweet Margie! Thank you for your kind words!

[@SouthCakalacky]

Thank you! I just got my cricut yesterday and I wish I would have come across your video before I started using it today. You covered at least 3 things that I know now that I did wrong.

[@Tessiefaye]

Thank you. I've had a Cricut since 2005 and still learn something from these kinds of videos.

[@MakersGonnaLearn]

Glad it was helpful!

[@Annie-io6wc]

O.M.G. Probably one of the BEST tutorials I have seen so far. I am a newbie at crafting; have a Joy and became addicted at really small projects so bought an Air 2 - still yet to turn it on. This tutorial was amazing at explaining how to fix most of what was shown. You explain everything so well that even as a newbie, I feel more confident and look forward to plugging in my new Air 2. Thank you so much!

[@MakersGonnaLearn]

Thank you so much! You're so sweet! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@angelinavazquez2374]

I am a brand new user, and I've been messing around for about a week, however this video was a total game changer for me. I cannot WAIT to watch more. Your amazing!

[@MakersGonnaLearn]

Aww! Glad it helped! You're so sweet! Thank you!!

[@derrelynweeks1532]

I’m a beginner , but this video has told me what not to do in the future . My favorite was sizing with the shapes. Thank you for showing us these 11 points! I just became a member and I love that too. My only problem I have is that there are so many classes and videos that I can’t get caught up. But I keep trying to get there. Thanks Rachel! ❤

[@MakersGonnaLearn]

You're welcome!

[@jeanneclark7561]

Thank you for reminding me about all this info! Most of it I've heard from you before... but ALL of it bears repeating because I know I forget some things when I am in the heat of a project! OMG - Like saving!!! SAVE your work! It doesn't hurt for the experienced to watch this for GREAT TIPS of the TRADE!Thank you so much for your time Rachel!! ... OH and I always like to watch the kerning... it's an art. THANK YOU!

[@MakersGonnaLearn]

Thank you SO MUCH for your kind words!! We appreciate you so much!!!

[@barbaraf6226]

Rachel, thank you so much for a great video. It was so refreshing...no silliness...no salesmanship, just direct, to the point, and very informative about using the Cricut. Thank you!

[@marylackey868]

Weeding off the matt is what I always thought how it was done, simply from watching several videos. So thank you definitely gonna write down that tip!

[@MakersGonnaLearn]

Glad it was helpful! Thank you so much!

[@bscdesigns37745]

How do you keep to clean when weeding i get fuzz balls and glitter all over it...I tried cleaning with la and took all stick off completely

[@lindabaker4911]

I’ve had my maker since before Thanksgiving and never used it. I am watch your videos over and over trying to learn before I start. I just don’t want to mess up my maker. I love your instructions you are easy to understand. Thank you for these videos.

[@Joanne-yl2sx]

Ah ha, I need to get a purple mat 😂. No wonder why I had issues with my glitter 😬. Thank you for explaining 👍😊

[@MakersGonnaLearn]

Thank you for watching!

[@downtomarz2343]

Super helpful! Especially that tip for kerning and welding the letters afterward. Thanks!

[@MakersGonnaLearn]

Glad it was helpful!😊

[@hairbyjewelsalon1015]

Omg! I thank you for this video! I have been making all of your 11 mistakes and more... I haven’t been able to complete not one project and I almost gave up... thanks 😊

[@MakersGonnaLearn]

Oh goodness! Well you're very welcome! We have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@Kris14825]

So informative.. I actually took one of my mats and cleaned it with a baby wipe while watching the rest of the video and was amazed that it worked and the stickiness returned as well. Mind blown! Thank you for all the tips!

[@cleargreenfire1]

Using the shape in design space just saved me from ruining a project. Thank you!

[@MakersGonnaLearn]

YAY!!! So glad you enjoyed this hack!

[@catalinawoody6954]

Got my toy for Christmas and can not wait to get started but viewing lots of videos to hopefully save me some heartache when I get started. Thanks for the video, I learned a lot!

[@MakersGonnaLearn]

You can do it! Good luck!

[@Renegram3]

This is my first time watching a video! Wow, what a great teacher you are. Very specific, direct, clear instructions. Thank you so much! Excellent overview.

[@MakersGonnaLearn]

Thank you, sweet Irene!!! Your kind words have made my day! Thank you for watching and commenting on this video. Have a great day!

[@pklaus547]

I have watch a lot of videos since buying my Cricut Joy last week and your is BY FAR the most informative and helpful! I have to search out direct Joy related videos of your now! Thank You!!!!

[@MakersGonnaLearn]

You are so welcome! I'm so glad you are enjoying the videos! Thank you!

[@deannpierce6923]

I am getting a cricut for christmas and new to using it. This was very informative . Thanks for sharing this info and all the links.

[@MakersGonnaLearn]

Congrats on getting your Cricut soon!! Thank you for watching and commenting. Don’t forget to check out Makers Gonna Learn for all of the resources you need to learn and master your new machine, as well as endless inspiration with all of our other resources to keep you crafting. Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@leshaunbaker]

This is AMAZING! New Cricut owner here, and could not figure out how to get the cursive attached! This all Was SOOOOO helpful!! Thank you!!

[@MakersGonnaLearn]

Glad it was helpful! Thank you so much for your kind words!

[@StashandNotions]

If you have contacts at Cricut, could you suggest a future update to Design Space to allow fonts to kern automatically as other software can? That would be a game changer! 🇦🇺

[@MakersGonnaLearn]

We would love that too, but unfortunately I don't think that's possible. As only some fonts need to be kerned.

[@mclark2288]

Silhouette can "weld" letters together, so I don't see why a cricut couldn't do that. It is so much easier than moving each letter individually. I just ordered a cricut, and I'm very disappointed to learn cricut doesn't have that option.

[@oscargoldfield1593]

I'm getting a Cricut for Christmas, so I'm trying to learn a few things. When I saw that you had to move each letter, I was surprised! That just seems like a ridiculous step that must be made. For $500 I would expect the letters to all weld with the push of a button. Geez. Great suggestion.

[@ellynbraun7029]

Can’t you just decrease the letter space? I know some things are different from computer vs mobile, but that’s what I do

[@StashandNotions]

@@ellynbraun7029 you can, but it’s lazy programming when the software doesn’t do it by default. I now do all but my writing lettering in illustrator because it’s more efficient.

[@kimmorgan8602]

So glad I found an actual learning channel for the Cricut. I can hardly wait to get started learning about and using my machine. Thank you.

[@MakersGonnaLearn]

Welcome aboard! Congrats on getting the top of the line Cricut! While the machine does not come with any instructions, with a yearly membership from Makers Gonna Learn, you will learn how to master your machine in no time. From opening the Cricut box all the way to creating professional projects, we teach it all in our 30 Days To Master Your Cricut course. Stay inspired with over 6,000 cut files and 500 fonts. We also have a member-only Facebook group that has over 10,000 like-minded Cricut crafters there to answer all of your crafty questions and mingle about fun crafts. With the yearly membership, you will gain all of the education needed to learn your machine, and have access to endless inspiration to make sure you never get bored! We would love to help you master your machine! Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@rachelmercado1750]

I’m a brand new Cricut user. This is one of the best videos I have watched, thank you. I’m subscribed:)

[@MakersGonnaLearn]

Awe!! Thank you so much!😊

[@noraconnelly2584]

Me too!!! So informative!😁👍

[@shaunah7373]

I was just thinking the same thing!

[@marycosta3202]

Me too! And I totally agree! Thanks for all the awesome info!

[@MakersGonnaLearn]

@@marycosta3202 Our pleasure!

[@marshabeers4864]

Thanks for showing/telling the difference between welding and attaching when using the font. Loved this video! ❤️

[@MakersGonnaLearn]

Awe!! We are so glad you loved this video!

[@luvmywings]

Welding! Who would have thought? Thank you for the very informative tutorial. I have the Joy and am working on my first project. This video saved me so much frustration I'm sure.

[@MakersGonnaLearn]

Glad it was helpful!

[@barbarasisk3518]

Love this channel. I purchased my cricut maker at Thanksgiving but have not felt comfortable using it. Watching your videos has inspired me. Thank you!

[@MakersGonnaLearn]

Wonderful! We are so glad we've helped you! If you’re looking for more beginner Cricut training we have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join today for $20 OFF using code “MAKE” at checkout!: bit.ly/mgl-join

[@saraparis8634]

Okay, I love listening to you and Tanner talk...I’m originally from Bristol, TN, so right up the way from you guys! Makes me homesick! ♥️

[@MakersGonnaLearn]

Aww, well hello Sara!! You're so sweet!!

[@oscargoldfield1593]

Thanks for answering my question. I'm new here and couldn't place the accent. Thanks! Marti- N. Ga

[@christinetennyson2183]

As a new Cricut owner, these tips will set me up for success from the beginning! Thank you very much.

[@MakersGonnaLearn]

Best of luck!

[@jennifermorris9174]

Great reminders. I didn't know about pushing the blade housing down. Thanks!

[@MakersGonnaLearn]

Yay! So glad to have helped you, Miss Jennifer!

[@OkieAngel]

This channel is gonna be a lifesaver for me! I'm waiting on my 1sr cricut to come and I have no idea how to use one so I'll def be watching ur videos quite often...tysm!!!!

[@MakersGonnaLearn]

Oh my goodness! Yay! Congrats on getting your Cricut! While the machine does not come with any instructions, with a yearly membership from Makers Gonna Learn, you will learn how to master your machine in no time. From opening the Cricut box all the way to creating professional projects, we teach it all in our 30 Days To Master Your Cricut course. Stay inspired with over 6,000 cut files and 500 fonts. We also have a member-only Facebook group that has over 10,000 like-minded Cricut crafters there to answer all of your crafty questions and mingle about fun crafts. With the yearly membership, you will gain all of the education needed to learn your machine, and have access to endless inspiration to make sure you never get bored! We would love to help you master your machine! Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@21worldview]

Thank you! I've got two Strong Grip mats that I've never used and I've cut a bunch of glitter vinyl. And heavy glitter paper that would've been so much easier to keep on the mat. And the keyboard tip for kerning! Love you for that!

[@MakersGonnaLearn]

You are so welcome! So glad this has helped you!

[@bgvarra1]

I just got my cricut and I didn't use it yet because I want to watch as much videos to avoid mistakes! Thank you so much for this!

[@triciatrzemzalski792]

Yay! I must be learning (from watching your videos!), because I knew every one of these! :) I'm only 3 months into a Cricut Newbie. I appreciate your videos SO much!!

[@MakersGonnaLearn]

Oh my goodness!!! Great for you to know all of these!! You're amazing! Thank you for your support, Tricia!

[@ecbrent2]

This one video helped me more than all the videos I've watched on Cricut combined! Thank you!!

[@MakersGonnaLearn]

So glad it was helpful!

[@jodywilley9936]

Thank you for this video! We just bought a Maker and haven't used it yet...this video is going to help prevent us from doing things incorrectly! I really love your content--thank you!

[@MakersGonnaLearn]

So glad you enjoyed it!!! Congrats on your new machine! Don’t forget to check out Makers Gonna Learn for all of the resources you need to learn and master your new machine, as well as endless inspiration with all of our other resources to keep you crafting. Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@lisarudd9958]

So jealous...everywhere is sold out and I have to wait until January. So impatient Lol

[@wyml2121]

thank you for all your tips/tricks. the way you explain everything is so easy/simple. I have been working with my cricut for almost a year and you guys have been so helpful! Thank you :)

[@MakersGonnaLearn]

You are so welcome!

[@paulaburnett1019]

Very informative! I’m getting a Cricut for Christmas and this information will help when I start to use it!

[@MakersGonnaLearn]

Glad it was helpful! Don't forget to check out Makers Gonna Learn for all the education you need to learn your machine! Our membership was designed with beginners in mind! :) Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@suttoncaperton2188]

@@MakersGonnaLearn i am to

[@BeautyGuRew]

This video is so helpful. I just got my machine a few months ago as an early wedding gift. I plan on using the Cricut to make our invitations.

[@MakersGonnaLearn]

Glad it was helpful!

[@G-grandma_Army]

I always kerned one letter at a time and manually! Thanks for the arrow tip!

[@CarlaHMaryKay]

That was a game changer for me also!

[@MakersGonnaLearn]

So glad you enjoyed this video!!!

[@MakersGonnaLearn]

It is a fun hack!!

[@jessicacox8139]

I also use the letter spacing option.

[@janlindsey8718]

You are an EXCELLENT instructor! I learn something each time I watch you. Thank you!

[@patriciakuhn6302]

I've had my machine almost a year now & the only thing that I have to check on is my blade in the housing. Thank you so much for this tutorial!! Huge help!! 😃

[@MakersGonnaLearn]

Oh yay!! So glad you enjoyed this tutorial!

[@Iris-mj1gn]

This is hands down the most informative beginners cricut guide I’ve found. Thank you!!

[@MakersGonnaLearn]

Wow, thank you! That is so sweet of you to say!

[@lorettaperry5146]

Thanks for sharing your knowledge with us. I’m new and new all the help I can get!

[@MakersGonnaLearn]

You are so welcome! If you’re looking for more beginner Cricut training we have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join today for $20 OFF using code “MAKE” at checkout!: bit.ly/mgl-join

[@michellemorgan3778]

Beginner since Christmas 2020 and I thank you for having this tutorial for beginners. Life changer.

[@MakersGonnaLearn]

You're very welcome! Thank you for watching and commenting! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@tashatillman2898]

You are the BOMB! I just opened my Cricut this week to start making projects.

[@MakersGonnaLearn]

Yay!! So glad to hear it!! Thank you very much!

[@Healthylivingwithwendi]

Thank you for these tips. I will be buying a Cricut soon and I'm educating myself now so I won't make costly mistakes.

[@MakersGonnaLearn]

You are so welcome! If you’re looking for more beginner Cricut training we have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join today for $20 OFF using code “MAKE” at checkout!: bit.ly/mgl-join

[@joterry7928]

You're a great teacher, Rachel! ❤💟💖💞💗

[@MakersGonnaLearn]

Wow, thank you! You're so sweet!!!

[@mels6208]

I'm a new Cricut user here! I loved all of these tips, thank you!!

[@MakersGonnaLearn]

You are so welcome!

[@tammykramer1334]

Some great suggestions & tips, especially regarding the blade housing needing to be in correct position. And you've made me a convert to cutting on my mat ! That made so much sense, thank you.

[@MakersGonnaLearn]

Glad it was helpful! Thank you for your comment!!

[@debspickler3753]

Me too! They never told us to cut on the mat ..... Thank you so much!

[@ivybasabe7096]

The best video so far that I saw about activity! Very informative ! Thank you!

[@MakersGonnaLearn]

Wow, thank you!

[@rachelcorsey9]

Getting my maker in a few weeks and I am so glad you created this video 🥰

[@MakersGonnaLearn]

Have fun!😀

[@colettemcdermott1026]

Hey Rachel, I am abrand new Cricut Maker 3 owner. I really appreciate this video. It provides information that a beginner really needs. Thank you for this information, habits I don't need to learn. Thanks again, Colette

[@Happilyeverafteretc]

At the top of Design Space there's an option for letter spacing... decreasing this will automatically pull your letters together. Much easier kerning!

[@MakersGonnaLearn]

This is not a solution for all fonts, which is why we don't recommend it all the time because 9 out of 10 times you will still have to ungroup and manually kern :)

[@Rachy71]

The use of the arrows to move the letters I'd never thought of before. This will help with the letters staying lined up.

[@bettymccrory2250]

Just love your explanations of everything so easy to learn from you all :)

[@MakersGonnaLearn]

Glad you like them! Thank you for your kind words!

[@widgetsmom1946]

What a blessing you are!! No more hubby temper tantrums and insisting on doing it his way!!

[@MakersGonnaLearn]

Awe! Thank you for watching!

[@oscargoldfield1593]

Getting a Cricut for Christmas from my hubby. Note taken: don't let hubby near Cricut. Thank you!

[@omariscolon6947]

I love the way you explain!!!! Thank you for the tips!!! I appreciate it!!!

[@MakersGonnaLearn]

You are so welcome! You're so sweet!

[@janetmvarela8428]

Do you have a video explaining the use of design space on an iPad? I’m having some difficulty with it!

[@MakersGonnaLearn]

Hello! Miss Janet, in our membership we have an amazing printable guide ALL about using the iPad with your Cricut. It does an amazing job explaining how to use your iPad. Go check it out if you're a member! If you're not, what are you waiting for?! Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@janetmvarela8428]

Sorry can’t afford your membership, we are retired on a limited income. Thanks anyway.

[@lorraineradaker5592]

I got a Cricut maker for Christmas and am so glad I came across your video before I even got started. Thank you for sharing

[@MakersGonnaLearn]

You are so welcome! Congrats on your new machine!

[@MrsCoffee1]

These are excellent tips and Being a Newbie these are really Helpful, Question when you talk about measuring How would I do that with an acrylic cup? Do I measure fully around? I've been trying to do a full wrap but can't get it just right.

[@MakersGonnaLearn]

Great question! For sizing vinyl on cups, we recommend sizing them around 3". When sizing them, if you go too large your design will look warped if the decal wraps too far around the cup.

[@bscdesigns37745]

I use a cloth measure tape to see how big I want my work area

[@lindaf821]

Thanks for sharing these helpful tips. I haven't opened my new cricut yet but can't wait to do so. I'm waiting to move into my new craft room to set it up. I will be following you .

[@MakersGonnaLearn]

Oh yay!! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@WAlycia]

Thank you, thank you, thank you! I learned so much tonight.

[@MakersGonnaLearn]

You are so welcome! Thank YOU for watching and commenting!

[@jrandolph13]

OMGoodness! I've watched a few of y'all's videos but THIS video has just made me a subscriber! 😘. I'm super new to Cricut, have a Explore 2 and have been trying so hard to follow different tutorials trying to make a shirt for my teens but haven't actually cut anything because I haven't felt confident that I'm doing anything right and too scared to mess up and ruin the materials or the Explore. THIS video is so simple to understand ( so many folks make tutorials so darn complicated) and SOOO helpful. Also I'm looking forward to clicking the other links for more details on these tips! Thank you so very much for your help 👍🏾❤️

[@MakersGonnaLearn]

Aww!!! Jenniffer, you're so sweet!! Thank you for your kind words. I'm so glad you enjoyed this tutorial. If you're looking for an easy one on how to use HTV (the material you'll use for your teens), here's a good one: kzbin.info/www/bejne/g5WQiWOXp7-hp8k .

[@erika8913]

Ty so much for this video!!! Lots of useful tips to be more time efficient !!! ❤️👍👍👍

[@MakersGonnaLearn]

You are so welcome!

[@sandradelost4610]

Newbie here and all your hints are very helpful. I haven't worked with the vinyl yet but am looking forward to it.

[@MakersGonnaLearn]

Welcome aboard! We hope you enjoy your machine! Don't forget about our wonderful 30 day Cricut course that allows you to master your Cricut in 30 days or less! This challenge was designed specifically for beginners and you are sure to learn SO much and become confident and well equipped to make so many projects with your machine :) It's free to all yearly members of Makers Gonna Learn. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@just_jaiden4077]

I just got my cricut on Christmas and i was wondering if u could do a video of non-expensive things to practice..at the moment i use printer paper

[@michellemoore3353]

I purchase random things from my local dollar store. Socks, make-up purse, dishes, vases, etc...

[@MakersGonnaLearn]

Here you go :) kzbin.info/www/bejne/mp3deKdnZ6-IetE

[@MakersGonnaLearn]

Good idea!

[@mooncrazyga]

Oh wow!!! I was making about 4 of these mistakes & it makes Such A Difference!! It's so much easier & I'm wayyy less frustrated with my project! Thank you so much!

[@MakersGonnaLearn]

You are so welcome!

[@sharonbaughman7414]

Loved this video. The last tip was an aha moment!

[@MakersGonnaLearn]

Glad it was helpful!

[@angelashaw8255]

Yes for me as well thank you

[@sarahscreativemoments5562]

Just learning, so I haven’t made these mistakes, and never will have to now! Thank you for teaching me❤️

[@MakersGonnaLearn]

You are so welcome!

[@karenwidaman9860]

I just rcv’d my Explore Air II yesterday. I have had an older Cricut for many years but this one s intimating. I am so thankful that I saw this video. I am a subscriber now. ❤️

[@MakersGonnaLearn]

Yay, welcome!! We have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@zackfagan1209]

I just noticed this weekend with the cursive writing that it still cut individual letters. Thanks for the welding tip! I needed the last tip since November....yea Christmas projects sucked because of that. Just figured out that was my problem last week.

[@MakersGonnaLearn]

yay!! So glad you enjoyed the video!!

[@trevahillyard2307]

The tip about weeding “on” the mat changed my whole weeding experience. I hated weeding before but now it’s a breeze

[@MakersGonnaLearn]

Right?!?! We're so glad to have helped you with that! We love weeding on the mat!

[@jackeridge8213]

Wow! I certainly learned some really great information today! Thanks and I can't wait to watch the other tutorials. I'm so excited to learn everything about my new Cricut Maker. Thanks Rachel!

[@MakersGonnaLearn]

Woohoo!!!

[@trevahillyard2307]

😳, ok, the tip about using the keyboard arrow keys was AMAZING. I’ve been manually moving each letter over, which messes up the alignment. Thank You

[@MakersGonnaLearn]

Glad it helped! Thank you for watching and commenting!

[@emilyerin05]

Great tips. But what really had my attention was your wedding ring set! Love it!

[@faithfulimagination226]

This was so good! Thank you!

[@MakersGonnaLearn]

You're so welcome!

[@janegirl33]

Ungrouping text so you can change the kerning! THANK YOU!! I did not know I could do this. Bad kerning makes me crazy.

[@MakersGonnaLearn]

me too, drives me nuts! So glad you like it!!

[@stephaniedavis5773]

I wouldn't say all of these are mistakes, but more about preference. I have always used my light blue mats the most, even for vinyl and HTV because thats what I prefer. The green is ok but a little more sticky than I prefer. I also hate weeding from my mat.

[@heathergallant2361]

thank you! I was feeling like I've been pretty successful with the blue mats and weeding on my craft table. I was worried I was a total fraud!

[@MakersGonnaLearn]

So glad you found things that work for you!

[@MakersGonnaLearn]

Feel free to do whatever works for you! :)

[@webwarren]

FWIW, I need to use my blue mats on vinyl a LOT until they become unsticky enough to not cause my papers and cardstocks to stick to the mat and disintegrate when I try to remove them from the mat.

[@heathergallant2361]

@@webwarren same!

[@cindilevy7308]

Thank you! Just purchased the Cricut Maker. I am brand new to Cricut as an owner and creator. I have not done one project yet. Going to tackle a tumbler once I find a tutorial for it. You are very well spoken and informative. I will definitely be following you. I am so excited to get started and start my new hobbie!

[@MakersGonnaLearn]

You are so sweet! Thank you! Also, we have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join our membership and start crafting today for our BEST DEAL of the year at $40 OFF grandfathered in using code “BEST” at checkout!: bit.ly/mgl-join

[@maryvega1673]

Love, love your tips. The circle around text n curning was just fab. Thanks

[@MakersGonnaLearn]

You are so welcome! Thank you for watching and commenting!

[@desgoldhawk3886]

Thank you for this video, especially the section about kerning, its been so helpful.