Tanto Datsun 510 235hp Rebello Troy Ermish built

We are back at #SEMA in #lasvegas for this Episode and "we" Peter Shaw Ryan Gall were following Actor Daniel Wu's #TheTanto #datsun510 build in the lead up to Sema like a hawk as we had heard awesome things about a #TroyErmish Built 510, We were not disappointed!!!!!!! What a beautiful car!! cheers Datsun 510 Parts Outlet #wilwood #ToyoTyres

[@DarkflamedPyromancer]

This is what I like. No engine swaps.

[@antonioalegria1412]

How it should be

[@dbz739921]

I got two L's in both of my five tens

[@Legend-lc9bv]

. You are a bitch

[@LawrenceRoss1906]

Sorry...I love the CA18DET that I put in my '70

[@510Finnatic]

Troy Ermish is the Datsun 510/610/710 master. Really enjoyed watching this, and hearing from one the great builders and racers. Really cool! Thanks.

[@GrassRootsGarage]

510Finnatic thanks for watching mate. Cheers Ryan and Pete

[@fcon1enduro]

nothing beats the sound of twin carbs on a l series motor ...

[@mattapusswreks7741]

That is bar none THE most beautiful Datto ive ever seen and i love the 510..she is the epitome of Datto power who needs a V8

[@MarkJCarruthers]

I spoke with Daniel at SEMA and this has got to be the nicest 510 I have seen yet.

[@GrassRootsGarage]

Mark Carruthers mate Pete and I were speechless when we checked it out!! Thanks for watching 👌🏻

[@Dane_the_Pain]

twin carb L series .. love it. great video .. always enjoy listening to knowledgeable people talk cars

[@GrassRootsGarage]

Randy Package thanks mate 👌🏻

[@dbz739921]

I got Solexs on my shit too

[@darrelltuttle8298]

I congratulate Grass Roots Garage and all other shops that take cars from yesterday and turn them into beautiful works of art.

[@GrassRootsGarage]

Darrell Tuttle thAnks for watching mate!!! Cheers Pete and Ryan

[@Datsun510zen]

Always great to see one of Troy's latest 510s. Last time I had mine there at his shop, he was finishing up a beautiful burnt orange Bluebird Coupe with a Rebello L series. Dude does amazing work. Good on ya mates, keep up the good work and keep those 510s coming.

[@GrassRootsGarage]

Datsun510zen thanks so much mate!!!

[@cryptofreedom5731]

I want that car!! Georgous Datsun 510!!! 🚀🚀🚀

[@danielhillwick8430]

I miss my 510 and the life and culture around it!

[@GrassRootsGarage]

Groovy Dude great comment mate!!!!

[@510Finnatic]

Never too late to get back in, only the prices have been going up for these cars, but patience and persistence can pay off in locating a good solid car to have fun with.

[@danielhillwick8430]

510Finnatic I have been looking in my area. There are a few 720 trucks around but no dimes. Unfortunately I moved to the South from Arizona. Everybody's into 4 wheel drive jacked up trucks out here 90% of the people don't even know what a 510 is in North Georgia. My blood is Tainted with Datsun, I will have another one in the future

[@dr8note]

Me too...Black 72 with full flares all round weber 40 DCOE side drafts,full cam,5 speed,ported,polished,bored to 1860...balanced,lightened etc...

[@TigerTodd46]

same brother. troy is the man and same with rebello. they helped me so much when i built my 71' 2dr in the 90's. legends.

[@danielforrester9863]

I can appreciate all the work that went into this car to make it look so simple. It’s easy to make something look chaotic but this car is seamless 👌🏻. I start my Datsun 620 build soon and I think this made me lean more toward l20b than ka24de.

[@ToughGarage]

Another great vid guys. This datto is super clean. I loved builds that stick to a theme, so neat.

[@GrassRootsGarage]

Thanks mate!!! Yeah she something special in person!!!!

[@jamestorres5582]

I remember see these cars on the streets yrs ago . I had a 510 with a 300 zx Turbo motor in it . 1990 was the yr

[@MarckoUlises]

Datsun Roots garage, i love datsuns wagons

[@midrangetorque]

ME TOO!!!

[@cryptofreedom5731]

Beautiful 510!! ❤

[@jasonren666]

these cars are always cool

[@jasoncarpp7742]

Awesome video! I've alway liked old-school Datsuns and Nissans.

[@GrassRootsGarage]

Thanks Jason

[@bridges5659]

Excellent. Besides being a racing kind of car, it's reliable on long runs.

[@toYOder]

My dream car!

[@wolfcastle8409]

Perfect styling, love the exterior accent colour!

[@GrassRootsGarage]

WolfCastle it’s awesome!!!

[@roman_pt]

beautiful

[@LeeePowers]

For those who dont know,Rebello is legendary in Bay Area for Datsun Tuning.

[@3rd-eye-neenja563]

and over priced!

[@paulmiranda3281]

Very Rad 510 so clean great style.

[@GrassRootsGarage]

Paul Miranda it’s awesome!! Thanks for watching mate Cheers Ryan and Pete

[@tint661]

Talk about kicking yourself. I had a chance to buy a decent 510 several years ago. It was a 4 door and someone had painted it John Deere green. I passed on buying the car. They look like fun project cars.

[@GrassRootsGarage]

As a owner of one for 17 years I can say they’re the best!!!! Cheers for watching mate, Ryan and Pete

[@georgetreece9193]

That's soon dope bro !!!!! bad ass ride 😎

[@GrassRootsGarage]

George Treece thanks for watching mate!!! Pete and Ryan

[@dirkantoine1]

WHAT A CAR!

[@GrassRootsGarage]

Such an epic build by #troyermish

[@ianbarber311]

I want to know about the pickup in the background. Beautiful car!

[@GrassRootsGarage]

Yeah unfortunately we ran out of time to speak to the owner!! It looked amazing Cheers Ryan and Pete

[@kpkp1077]

Just subscribed...... beautifull car!!!

[@GrassRootsGarage]

Suck My_Duk thanks for watching and subbing mate 👌🏻

[@fourocker]

This Datto is shit hot, like it a lot !

[@GrassRootsGarage]

Thanks for watching mate!! Cheers, Ryan & Pete

[@sebsshenanigans]

man, as good as turbos and superchargers sound... there's nothing quiet like trumpets on some carbys

[@dattepo7534]

Damn now makes me regret not doing the 2.2 l

[@GrassRootsGarage]

Dat Tepo maybe the next engine???? Thanks for watching mate!!

[@bindabbin6067]

Yaaaassss 510

[@Suppboio]

i love Troy

[@w00tplayaw00t]

I have the same Datsun hat!

[@dbz739921]

AND?

[@sammygarcia4924]

Nice cars...😎👍

[@psavel274]

Nice 510. I like the powdercoat color. What's the story with that beautiful e9 3.0csl??? Any shots of it? Thanks

[@1Kartoom]

A true Datsun 510 with an L series motor, love your work, Troy. I like those seats. What brand are they?

[@GrassRootsGarage]

Gday mate, Thanks for watching!! best bet is contact troy direct and ask about the seats as we are not 100% sure Cheers, Ryan and Pete

[@carl_marks1626]

The houndstooth seats look the business, good styling. Would 4 gauze covers over those carburetor trumpets be a good idea ? Just thinking about little stones and bugs being sucked in them.

[@GrassRootsGarage]

Carl_Marks solid point mate!!! Thanks for watching

[@carl_marks1626]

I had some on a set of Weber’s and they did the trick. Cheap, easy and didnt look out of place. Great build man.

[@xyz-uz6me]

Can you also do a review on the 620 pick-up in the back please?

[@GrassRootsGarage]

We will try and get it next time we are in the States. Thanks for watching mate

[@sipposbft]

620 is a 2 door ?

[@shirokuro1720]

hermoso

[@tscooter22]

All of that money on the engine and it doesn't have air filters. I see it so often and it always boggles my mind.

[@tommurphy4307]

the '06W' 2.2 block is a boat anchor compared to the 'U60' L20B block. the L20B block is more rigid with its more robust skirt section. you can take the U60 bores out to 90mm with no problems. why use the Z22 block? also the U60 crankcase breather is right where you want it with the 46mm SU carbs. twin choke carbs not a good idea for a normally-aspirated street motor- no air speed at low rpm. the U60 crankshaft is fine with 10,000 rpm- the bigger cranks bend or even fail at that speed. never had rust problems in my cars and i use floor sound deadening in all my street cars. if you build a motor using a Z24 crank , then use the Z24 block. too bad it won't fit properly in the pl510, but it will work fine in the trucks, 610, 710, S10, or A10 510 (77-81), or 810/910. there's no substitute for cubic inches or long rods! the important thing about building 510s is never forget you are building a severe-duty STREET car- not a race car.

[@GrassRootsGarage]

Thanks for watching mate, for us this was the best build Datsun at Sema. We’d be more than happy with a 235hp Rebello boat anchor engine 😉 and Troy certainly knows his Datsun’s!!! But thanks so much for your comment! Cheers Ryan and Pete

[@scel62]

510s have become stupid expensive. used to be affordable to average people

[@GrassRootsGarage]

Yeah they definitely have become expensive!! Thanks for watching mate. Cheers Ryan and Pete

[@brianchong4134]

Insane Dime......but whats the story on the 620 back there?

[@GrassRootsGarage]

Thanks for watching mate!!!! Unfortunately we were unable to get a story on the 620. Cheers, Pete and Ryan

[@Mister006]

Funnest little go-karts! Nissan today sux. More cars, less looking at two people yakking.

[@GrassRootsGarage]

Mister006 thanks for watching

[@cryptofreedom5731]

What did this build cost? 😊

[@josephbohme7917]

Sadly no airbags to S Y A in an accident on the road. A must have when you have been in a face plant or two of a gun powder airbag.. At 68 we see a reality of life. and walking away,

[@stonebarnard5034]

ugh....that truck....

[@evilflowx]

235hp to the crank... i wanna know what it puts to the wheels. 210? 215?

[@juliominera9999]

Anybody please tell me the next 510 car show will be handled in LA. Today’s date is 8/21/2019 thank you

[@AlejandroPerez-vn2ib]

After seeing all these vids I see no datsun with sound system why is that?

[@GrassRootsGarage]

There’s no better sound than the engine!!! 👌🏻 Thanks for watching Cheers Ryan and Pete

[@wolfyhalfmoon819]

Lol small world, I remember looking for an old 510 near me in utah a few years ago...wonder if this is the same car...

[@GrassRootsGarage]

Alexander Familo could be!!!! Thanks for watching mate!! Pete and Ryan

[@mannypadilla9964]

Anyone know what Intake manifold this is?

[@anca2072]

It was made jealous LOL😂

[@blackt2710]

What size tires did he use?

[@sipposbft]

yeah I get he wanted to keep the L series engine... but SR would have been cheaper & more power productive.. but beautiful car

[@GrassRootsGarage]

sipposbft thanks for the comment mate, We totally get your point and I "Ryan" actually have a SR 510 but there is really something about that oldschool sound that can’t be beat!!! In perfect world I’d have my sr 510 and another one built exactly like this! Thanks for watching Ryan and Pete!

[@frankmick4900]

Restore a 510..... then U can be called the ''Master''.

[@spoonz1065]

What colour code is that ???? Its beautiful

[@GrassRootsGarage]

agreed! love this flat grey. It's a custom colour so no code mate.

[@spoonz1065]

GrassRoots Garage . Was it based around any colour ? Is it flat grey or metalic or pearl etc . Been looking for a grey for a while and that just pops !?

[@GrassRootsGarage]

Jay Bullock it’s based of a Porsche grey mate, it’s a solid colour with no metallics

[@spoonz1065]

GrassRoots Garage Thanks so much

[@dattepo7534]

I want to see the truck

[@GrassRootsGarage]

Yeah sorry we ran out of time!!!

[@twodub]

Dude looks like a young ass Ted Nugent

[@georgetreece9193]

That's so

[@johnjohnson-fe5ot]

anyone know the powdercoat colour code for those rims?

[@GrassRootsGarage]

john johnson hey mate! Thanks for watching!! It was custom mix so you may need to contact Troy and team at Datsun parts outlet direct Cheers Ryan and Pete

[@elvinmandujano2512]

i still dont understand how much HP comes from an 70hp motor.

[@GrassRootsGarage]

Elvin Mandujano years of experience 😉 Thanks for watching mate!!!!

[@dbz739921]

96 fool

[@Alexgarcia-uz3uo]

What’s the name of there shop in NorCal

[@GrassRootsGarage]

Thanks for watching m.facebook.com/datsun510partsoutlet/ Cheers Ryan and Pete

[@shanemcinnis6078]

Anyone know if these are the RScarbon flares?

[@GrassRootsGarage]

Speak to Troy and Ashley from facebook.com/datsun510partsoutlet they will help you out 💪 Cheers Ryan

[@MrRotaryrockets]

great build but what does it cost..

[@GrassRootsGarage]

This is at the top end of a quality build so we couldn’t comment. But for us the way it sits it’s priceless 👍🏻

[@Datsun510zen]

Cost is relative. All I know is it's not getting cheeper.

[@dbz739921]

Like the old saying goes, if you have to ask you can't afford it

[@josephbohme7917]

A roll cage does not have to be big round steel tube. there are better stronger forms- this is too rudimentary.

[@renaissancemanman]

you said mono balls

[@janeblogs324]

Not 1 single shot of the whole car

[@GrassRootsGarage]

????

[@janeblogs324]

Stand back, point the camera.....haven't you ever picked up a car magazine?

[@GrassRootsGarage]

No never in our life 😘

[@latupeni9797]

Nissan/Datsun so nasty

[@GrassRootsGarage]

Absolutely filthy 😊