How to Make a Tesla Coil at Home | Wireless Power Transfer

Learn how to make a tesla coil which can transfer electric power through air that is known as wireless power transfer.
Circuit Diagram on EasyEDA-goo.gl/vy3f1I
Required Material-
1. PVC Pipe 9cm
2. 28AWG Copper Wire www.flyrobo.in/0.1mm-copper-s...
3. 2N2222 Transistor- www.flyrobo.in/2n2222-switchi...
4. 2.2k ohm Resistor
5. 9v Battery and Connector
6. ON OFF Switch etc.
Thanks For Watching my Videos.
My Social Links
Facebook- / tapendramandal
Instagram- / tapendramandal
Twitter- / tapendramandal
Music Provided by NCS Release-
Different Heaven - Nekozilla- • Different Heaven - Nek...
Jim Yosef - Arrow- • Jim Yosef - Arrow | Ho...

[@garyberger]

First, thank you Tapendra for this excellent video! I made this and it works - but it took me a while to get it all right. Some speedbumps I encountered: 1. Be sure to sand or scrape the insulation completely off both ends of the secondary coil. Check continuity between the two ends (I used an inexpensive multimeter) to insure that the insulation is off. I thought I had a good connection until I tested it and found that I hadn't gotten all the insulation off. 2. Use a 22K ohm resistor, not the 2.2K indicated. Using a 2.2K will fry the transistor pretty quickly. 3. Be sure to wind the primary in the opposite direction of the secondary. Four turns seemed to work best for me, it can be tightly wound around the base of the secondary coil, and neatly taped to it.

[@kamleshkumaryadav9360]

How did u get the insulation on

[@garyberger]

@@kamleshkumaryadav9360 it is enameled copper wire. It already has insulation although you can't see it.

[@kamleshkumaryadav9360]

Tysm for ur prompt reply. Is there anything more to be considered while making this so that it works perfectly ?

[@gberger1951]

@@kamleshkumaryadav9360 I blew more than one transistor due to overheating so make sure you have spares (mine came in a bag of 200). I'm not quite sure why this happened - I'm an amateur at this. Using a fresh 9-volt battery seemed to overheat the transistor, which leads me to think that maybe the resistor needs to be an even higher value. However, at this point it is stable and working consistently with a 22.2K ohm resistor so I'm not sure. Just don't give up, it WILL work.

[@gberger1951]

@@kamleshkumaryadav9360 One more thing - I found that using a small breadboard to wire up the transistor made it very simple to replace it if it overheated.

[@_crazy_chinnu_07]

Those who are watching after 6 years from the uploaded date😅

[@brlinrainf]

me

[@_crazy_chinnu_07]

@@brlinrainf Do you play free fire?

[@djdj52]

Tari mar

[@tvaccount94]

Heyo

[@asesangtam8771]

❤

[@user-nj9my9ep9c]

Thank you for this circuit. I was able to power a multimeter from a few inches away with a receiver coil antenna,with six volts on the coil.But then I put nine volts on the coil, and I was able to power it without a receiver antenna! I made it with some plastic coated insulated copper wire. Also I could get an RF reading on emf meter a foot away from it! Thank you very much!😊

[@gracerhee3965]

what kind of bulb did you use?

[@AyushVerma-xh4hx]

amaaaaaazing my friend . lOVE AND RESPECT-> FROM INDIA

[@navneetsengar9722]

I made this coil and it didn't work at first then I started to search for flaws on internet and I got the solution What I did was I increased the number of primary coil turn from 3 to 4 it didn't work then I increased it to 5 turns also then it didn't work. Then I replace the primary coil connection that is one which was connected to transformer I replaced it to connection on the switch and vice versa And boom the flurocent tube light started to glow just when I was going to give up on it So please don't give up, search for solution and you guys will also be succeed 😉😎😎

[@zenmori6773]

Yes I highly agree! We were in the same condition when I was attempting this but I don't give up because I will fail in school.

[@you-know-who3873]

Please help me out as well

[@you-know-who3873]

I have been doing this from 2 days..,it didnt work...do u have any solution ?

[@navneetsengar9722]

@@you-know-who3873 try increasing number of turns of primary coil (which is the less number of coil) If then also it didn't work try to reswitch the position of the primary coil that is connect wire on the switch to the transistor and so for the other end

[@navneetsengar9722]

@@you-know-who3873 kzbin.info/www/bejne/d3PXaHVsbdFsa7s Refer this video for correction it helped me last time

[@OnEPuNcHFinaTIk022]

Nikola Tesla, one of the greatest minds in history.

[@pranjalbiswass]

Even greater than Einstein

[@SportsEntertaiment101]

The greatest

[@achyuththouta6957]

@@pranjalbiswass Nope

[@pranjalbiswass]

@@achyuththouta6957 yess

[@achyuththouta6957]

@@pranjalbiswass No. Tesla's inventions don't even come close to the complexity of general relativity

[@crypto9787]

Great idea bro you saved my school project

[@MrtmRber]

Idk if you are ever gonna read this but I made this as a physics project. It worked and I’ll probably get perfect grade. With that said, I just wanted to tell you that you are the best and a lifesaver. P.S: liked and subscribed with notifications on, so keep up the good work

[@galacticlava1475]

What type of wire did you use for the white wire?

[@tenagertena104]

​@@galacticlava1475 I think normal one

[@memo0206]

did you order the copper wire from the site provided in link.....if yes was it worth?

[@tenagertena104]

Sorry I was wrong you have to use enameled copper wire

[@MrtmRber]

@@memo0206 I bought it at a local shop

[@kairavb]

sir Nicola Tesla , my favorite scientist and this is one of many great experiments!

[@dragni1223]

He was an inventor

[@execuition9080]

Mee to

[@shivangshivang8514]

Me too

[@jayshreesalve3552]

Great bro this scientific projects

[@nurphurecarnium]

He was an inventor (2)

[@BEBOTPRO]

great man great !!! what a project

[@akitorisano9948]

Thanks bro for showing how to make it .it really helped me

[@maggielucy9824]

So simple - a fun and affordable project to do.

[@rajudriver1092]

Teri bhen ki

[@techboystoys]

magic idea....its new...great video...10k likes from my side

[@tapendramandal]

+TecH BoyS ToyS thanks bro.

[@rajmakwana5484]

no white colour wire

[@ankitchahal1386]

Tapendra Mandal sir help me which resistance to use 2.2k or 22k ohm?

[@FlickWiz]

Tapendra Mandal bro ek dc motor chala ke dikhao es tesla se please

[@tapendramandal]

Motor nhi chalega is se only cfl jalta h

[@rudrakajale854]

Yeh!!!!!! It is working. Thank you now I can take it in science exhibition in my school

[@kratikaagrawal3436]

Kyo fek rha h

[@syedasultana8403]

Can you please tell me the kind of the resistor? Is it 2.2K ? Or 22K??

[@AbhishekSHegde]

wire wounding part was the best😍👌

[@simorg99]

Çok teşekkür ederim çok güzel ayrıntılı ve net bir bilgilendirme olmuş eline sağlık

[@nishanthav7684]

Nice bro working perfect

[@pandurangasetty5860]

How many turns did you made

[@lizzhm4620]

Thank you very much! ❤️

[@shakalahammed724]

Crushed with this Technology

[@shreyassharma5081]

It works👍I made it for my school science competition

[@xyz8614]

Yes. I made it, it was working. I got a gold medal in my school exhibition.

[@durgeshjadhav5151]

😂😂😂😂badi badi fek aur

[@shivamkaushal2596]

@@durgeshjadhav5151 nice

[@ruchisah3006]

Bhai kaisa banaya

[@vinaypal3537]

Hlo bro

[@vinaypal3537]

@nirjhar does it work properly

[@tulemeritestm7624]

I liked the video cause of the song Arrow from Jim Yossef. ;) I love it. This tutorial is Really easy to understand, and really Cool ! thank you so much

[@kgmvines690]

Great experiment

[@prathmeshwattamwar3842]

I have made this project..and it works 💯💯🙏

[@ritikagautam7025]

Tell me how it works .. Coz my project isn't working.. Plzz help me

[@rasoolmohideen9001]

Pls tell me that what size copper wire should be uses?

[@eshansworldofcube9205]

I tried it and it is working , if yours is not working then try giving the connection of the primary coil in the opposite way or try using the 22k resistor and try adding a limiting resistor to the negative end of the battery clip

[@marwanhasan6449]

How i give the connection in the opposite way ?

[@ayushi991]

Hii,I am making this project done all the connection possible with 2.2 k and 20k resistor too but bulb is not glowing.Can you please help me with that?

[@aishwaryavernekar1878]

Can u plz tell me what is that white wire??

[@TRUECHAD13]

@@ayushi991it’s a 22k resister

[@karthikepk7668]

Thanks for your project video. It helps to my son for his science expo

[@sakthivignesh5519]

Really bro

[@farhatahad9688]

he was a great inventor

[@GOATAryan999]

THX bro, I will make it as my science project.😘😘

[@raybois]

Great soothing music to learn by and study electicity. Make sure you use it on all your videos (which I will unfortunately not watch...)

[@MUSIXATOMIUM]

kzbin.info/www/bejne/d4PaZJaqedapg7s

[@baburajanpv5542]

I made this Tesla coil & it worked ! Good Video👏👏

[@himanshusoni1340]

Bhai coil ko kitna raud kiya tha

[@theranjansingh1]

lol ye chutiya jhut bol raha aisa nhi hota hai... its fake... common sense... tesla coil aise nhi chalta...

[@sayaprasad2679]

Thank you for your vedio... It helps me a lot

[@BhartiPatil.]

Well done keep it up!!!

[@wearefriends1165]

Which wire you use to lap around the copper road

[@somnathbanerjee1673]

Great tutorial and damn easy to make. Thanx for teaching such a easy way to make Tesla coil 👏👏👏

[@tapendramandal]

+Somnath Banerjee thanks for ur nice feedback

[@shubhtejani5]

@@tapendramandal bro can you tell how many meters will come if i order the 28 awg wire from your given link?

[@cowboyzgirl3285]

Can someone give a list of what the items are needed and written instructions to make this.

[@aplacetoimproveteslacoilin3721]

The Tesla coil is a device that uses high voltage to create an electrical discharge. This discharge can be used to create sparks, or it can be used to power an electrical load. The Tesla coil is named after its inventor, Nikola Tesla. There are several ways to create the high voltage needed for a Tesla coil. One way is to use a spark gap. A spark gap is a device that creates a spark when a high voltage is applied to it. A spark gap can be made from two pieces of metal separated by a gap of air. When the high voltage is applied, it creates an electric arc across the gap. This arc will produce sparks that can be used to power an electrical load or create sparks in the air. Another way to create the high voltage needed for a Tesla coil is by using a transistor.

[@dusklightyt9054]

Did it work?

[@jerryholmes2963]

Badass.. I like the music better too 😆

[@janani7622]

This experiment had worked for us 💥💥

[@hannahmaenacasi742]

For real?? Coz I have some questions 😅

[@ligerbs2639]

The copper wire pipe looked like max level hidden Tesla in COC 😂

[@zoyakhatoon3998]

Exactly😂😂

[@Niyornellimray]

Yes

[@Noah-zz8uw]

Red Alert Teslas are where it's at

[@vishvgamer8830]

Yes

[@AlphaCreativity001]

Yes

[@suhasiniburkule8389]

IT's working✌️✌️✌️👍👍👍👍👍

[@nishadhassan1748]

Can i use ani light ?

[@lalucyx369]

Thank you so amazing!!

[@shivam.s.dangwal2467]

Thanks bro for it Its fabulous keep it up bro

[@harsha5m]

Ultra legends are only searching here about this ...either works or not! Can u raise u r ✋.

[@sumit_rider_0787]

😁

[@asthamaurya7512]

fake hai 200₹ phuk dale proper way batate nhi 😢😢 tesla coil to hota hai but ye pata nhi kis trh banye hai 😢

[@kinggamerz5805]

​@@asthamaurya7512bhai 1000 phuk diye phir bhi ni kaam kar ra dc bulb chahiye ya ac pta ni😭😭

[@asthamaurya7512]

@@kinggamerz5805 ek channel hai Mr.indian hacker name se unhone proper way batay hai usse kam kr jayega bas unka channel ka name aur tesla coil likhke search kro

[@zenenberg3268]

I miss those days that I used this experiment in our Science Fair.

[@jijijija1448]

How do you do it on your science fair?

[@zenenberg3268]

@@jijijija1448 I followed this video and got an awesome outcome.

[@zenenberg3268]

@@jijijija1448 I think I've lost it, but I am not good at constructing research paper.

[@mindeddudedesk4441]

@@zenenberg3268 Hello how much does it cost to make tesla coil??

[@poovarasi..]

@@zenenberg3268 please tell how much u spend for it please I want to do for my science exhibition

[@yor5151]

Exellent work thank you

[@shivani99999]

tapendra!!! very great👏👏👏

[@Jeffrey314159]

I recently constructed a Solid-state Tesla-coil just like this one here with no affect on fluorescent tubes or such bulbs. It only generates Theremin sound effects in a nearby AM Radio Receiver.

[@Rohitkumar-dr8jy]

Watch this tesla coil 100% kzbin.info/www/bejne/amXQZIOvbpiSoc0

[@Jeffrey314159]

@@Rohitkumar-dr8jy This video posting was no help - - Just cool to look at

[@Rohitkumar-dr8jy]

@@Jeffrey314159 what help u want

[@parabsainath]

created successfully. only use 2.7k ohm resistor. 2.2 was not available on the local shop. thank you so much.

[@kingdreadlxrd]

Bro what kinda ball you used

[@gauriagrawal3974]

Can we use 22k ohm resistor????

[@oropyt]

@@gauriagrawal3974 yes that is better than 2.2k ohm

[@oropyt]

@@kingdreadlxrd any thing that is circular

[@hariwibowo9026]

thanks it works, works with TIP41C transistor too, im using 5v phone charger/powerbank

[@hariwibowo9026]

and I suggest to use tip41c for thermal stabilisation, cus 2n222 just too hot, and tip41c is easy to equip with heatsink

[@trevercole4644]

Will any transistor work? O4 at least most of them? Like one from a tv or...?

[@hannahmaenacasi742]

And what resistor did you used? 2.2K or 22K?? Please reply

[@akshatkumarmishra424]

so cool thanks for helping me out with my science project man

[@ijazahmadkhan939]

What is the AWG of 3 turn coil

[@hannahmaenacasi742]

Hi! I just want to know what is that white wire with 3 turns

[@newideas9073]

It really works. I have made it for science project . Thanks for Project.

[@pradiptabeura2421]

Bhai tera phone no dena

[@pradiptabeura2421]

Because I need it for my son project

[@shivukumarkr6711]

I did this experiment , It's working Thank you 👌👏👍🏻👍🏻

[@mercyscientific9608]

Shivu Kumar KR it's working

[@usamaansari7903]

what value of capacitor u used 22k or 2.2k?

[@jericrabe8900]

How did you do it? Pls. Tell me

[@KamalKumar-sr7ow]

Bai ye sachme kam karta hai plz reply me

[@aditifavorites2071]

ma 1 month sa lagi hui hu mera nhi chal raha

[@codycann4737]

Imma use this for the science fair thanks :)

[@AkashYadav-ic3ny]

Superb !!

[@ava-gz5sn]

Thank you so much! This totally worked amazing for my science fair project. Thanks!!!

[@memo0206]

did you order the copper wire from the site provided in link.....if yes was it worth?

[@ava-gz5sn]

@@memo0206 I actually didn’t even realize that there was a link. I bough the copper wire off amazon

[@memo0206]

​@@ava-gz5sn can u pls provide the link?

[@ava-gz5sn]

@@memo0206 sure

[@ava-gz5sn]

@@memo0206 also this is a good time to mention I had the wrong gage wire by 1 but it still worked

[@girishmohan3348]

Bro can u give me the list of apparatus?

[@prnutrition3068]

Super amazing wow exellent 👌👌👏👏👍👍😎😎🙏🙏🇮🇳🇮🇳

[@sanju9326]

Bro super bro Vera level😅💕

[@user-ik1cg4ci5l]

本当に素晴らしい！ Excellent! I make it ,too!!

[@sciencetutor635]

Please can you eplaine?

[@Kurtfruelda11]

@@sciencetutor635 explain

[@tridentgaming5887]

@@sciencetutor635 You can also find this kind of videos here..kzbin.info/www/bejne/lZ_Qg3mpqqiUm7c

[@tridentgaming5887]

@@Kurtfruelda11 You can also find this kind of videos here..kzbin.info/www/bejne/lZ_Qg3mpqqiUm7c

[@Ophelie_daisy]

Really wonderful! Excellent! I make it , too!!

[@aspeckt69]

Can we use another copper wire awg? The link you mentioned next to the copper wire in description leads me to a 38 awg wire?

[@zidelectricalmentor]

Good job

[@siddiqali2177]

Op brother.Good job😁😁😁😍😍😍

[@afthabgaming2762]

nice

[@mohsinaanzer9084]

Thank you it worked for my Science project.but how much Wt was the bulb

[@oldgangster4119]

Doesn't matter

[@childrensaregiftofgod3396]

Thanks brother

[@sujalchoudhary5159]

Very nice 👌

[@KatharinaBachman]

The great Genius - I’m a great fan of Nikola Tesla 💕

[@apbe2q35]

Mi 2

[@MUSIXATOMIUM]

kzbin.info/www/bejne/d4PaZJaqedapg7s

[@user-gn7bo6yc9j]

It is not fake. I used copper wire instead of white wire, and it worked. you can not skip toroid when you make this

[@vijayalakshmim.n9434]

He man how can't it work it only works on ac voltage

[@nattuthuraimallika5351]

Bro it is working 💯

[@dusklightyt9054]

wait its actually working?

[@vikash39r44]

Bro littrly insane

[@sreesanth7298]

Bro so much thanks 😊 I did this project and worked at 3rd time Thank you so much 🙏

[@manvigarg9307]

Hlo

[@prestontingley8914]

You’re awesome man, I appreciate the clarity(: I need it when it comes to circuitry

[@dhyeyparmar7089]

Can we touch the aluminum foil if switch is on and how much volt is going

[@palward1996]

@@dhyeyparmar7089 well it is a 9v battery

[@DeFi.Nabeel]

@@dhyeyparmar7089 Can you tell what was that white wire??

[@hannahmaenacasi742]

@@palward1996 can you tell what was that white wire? Is it a spring on the notebook?

[@mrpchead8223]

@@DeFi.Nabeel aluminum wire

[@savogameing1518]

Nice video Thanks 🇧🇩🇧🇩

[@MehakGupta]

Thanks for the idea it's working I made it and today is our science exibition 😊😊😊😊👌👌👍👍

[@madhivanan9213]

Mehak Gupta plz tell how to do😥😥😥

[@rishabhtandon7960]

What length of copper wire is needed

[@sunilkt1322]

I am study in 8th class and I make it but it is not working pleas help me my my electronic teacher says that is impossible and I challenged to teacher i will

[@MehakGupta]

Yes it is possible all you need to do is following this video surely it will work 👍👍 best of luck

[@MehakGupta]

Just make sure that you are using the correct transistor and resistance and solder all connections properly

[@cichildtinfoil1743]

Nikola tesla was way ahead of his time. So much creativity and intelligence in the same person. Words are less to describe him.

[@TefnutRe999]

And thanks for the excellent vido

[@rhymesrahasya664]

Awesome awesome 🔥🔥🔥

[@iamsai7052]

Iam useing dor my sience project taq

[@jeffcarpenter7721]

beautiful coil bro gonna try it myself il be back with an update love the videos

[@abdalmajeedafandi5805]

Is it work

[@jeffcarpenter7721]

@@abdalmajeedafandi5805 i made it just like the video but transistor just gets really warm no wireless energy

[@abdalmajeedafandi5805]

@@jeffcarpenter7721 thank u

[@samrudh7177]

does it work bruv?

[@jeffcarpenter7721]

@@samrudh7177 it just heats up transistor alot not sure why

[@mainaksome9027]

So simple that everyone can try it ..........

[@jillwright2239]

Thank you

[@priyanshurai7595]

Ok, I'm going to try this

[@tendilvignesh1508]

Whether the measurements of pipe can vary or same as in the video

[@erikszmolniczky9601]

ty for tutorial ezaf

[@STFocus]

Good work

[@OGdrodro]

Big up my man Tesla what a great man

[@back2earthhealthretreatand829]

Hi there, looks amazing. Do you sell them?

[@tridentgaming5887]

You can also find out this kind of videos here..kzbin.info/www/bejne/lZ_Qg3mpqqiUm7c

[@seyyedhafiz]

Greate work bro Keep it up impressive

[@zidelectricalmentor]

❤❤❤❤❤ ﷲﷻ آپ کو سلامت رکھے آمین

[@technicalmind1199]

Nice bhai

[@renumeshram7157]

Can we take any value of resistor in that model?

[@jagdishkumawat5163]

No

[@jaysharma4766]

You can watch Resistor calculation by freak engineer And Tesla coil by freak engineer

[@faizakhtar5329]

33 ohm 1/4 watts

[@MUSIXATOMIUM]

kzbin.info/www/bejne/d4PaZJaqedapg7s

[@TheRealSpaceC]

Just a question... I was wondering if the resistor was added so the transistor did not blow, or if it was so this was not actually dangerous (i mean its only 9 volts)

[@vibhasurana3169]

They could have used heatsink

[@user-wc1qu8jd7h]

takes fooorever

[@nizeyimanajacques8617]

Good project

[@sumanshaw8011]

I made this 👌👌 its really works 😍😍😍

[@uveshkhan5023]

Please tell me bro

[@chandimahewavithana5740]

how much meter copper wire did you use

[@GeeksfromIndia]

Pretty cool 😎 bro nice PROJECT dude....😘 I WILL TRY DEFINITELY... 😋

[@tapendramandal]

+deepak pendyala thanks bro

[@Notlegendshadowyt]

Don't try it's just a waste of time... it doesn't work

[@pushtech6999]

@@Notlegendshadowyt its working..

[@avijitkotwal62]

I like "Nikol"Tesla I always try this experiment.👍

[@Best_football_shorts871]

Bro thank you 1 got the first 🥇🏆 rank in science fare

[@obesity259]

Will LED get lighted too? Or we have to use flurocent bulbs only?

[@NoobGamer-1233]

pretty sure its only flurocent'

[@sampreethsj4951]

What is the potential difference across coil L2 ( the one with 3 turns)? Can you please check in multimeter and reply.

[@delli5608]

After 2yrs is your project done 🤣

[@akshaymenon6751]

Great video

[@wicked9299]

Because of battry current passes through coil and making induced current increases the no of tones and area will provides more induce emf

[@HASANEN-ws8so]

How can an induced current be generated when a direct current is used?

[@leenbajhzar2044]

i love it i love it i love it tanks so much ❣❤ i ll'l do it in my school 😭😭💙💙

[@chhatraymajhi635]

How does it work tell me please