Taranis QX7 Setup + iRangeX 4-in-1 Multi-Module

[@laytonblance]

Hey man thanks! I was scratching my head on how to setup the module and you saved me a bunch of time, so thumbs up!

[@stevenjohnston1788]

Is their a way to keep the throttle speeds adjustable when binding to E011. I hear a lot of people mention that theirs feels stuck in the lower setting after binding. How about setting up for keeping the option for flips?

[@williamsfamily5]

I'm help my dad set this module up on his qx7 and for some reason MULTI does not show up as a option under external rf mode. How to u fix this?

[@Jackal_FPV]

Did you flash opentx to the radio with the multiprotocol box checked in firmware options?

[@williamsfamily5]

@@Jackal_FPV it was firmware related we reflashed it and it worked. Thanks

[@w.t.fpipedreamwithhopefull5538]

The video skips when you choose Multi. My transmitter wont give me the option?

[@w.t.fpipedreamwithhopefull5538]

I had to give the Transmitter a specific update. not the latest version.

[@southernsawyers6543]

hey brother you sure helped me with the open tx and qx7,when u set up i see some set the auotbind to on,but i didnt notice u did,and i was wondering about the special function switches are there other things i can set up,like the modes or other without having to go the the flight programs i know nothing about,

[@Jackal_FPV]

Depends what you are setting up, what kind of quad are you binding to?

[@southernsawyers6543]

sry replied wrong place,x5c ihave a x-16 im sure its gonna be fun lol

[@southernsawyers6543]

Jackal FPV iwas guessing when i bind ,i have togo into setup then scroll down to find bind,then i use the arm switch you showed how to set up,i seen u reply but a error 404 come up

[@dronexfun8469]

Once you have your toy quad bound how do you change the rates? Or are the rates locked, and which rate is it in? Thanks a million.

[@Jackal_FPV]

DroneXFun you’ll get the maximum available rates. Sometimes this is even faster rates than the highest rates on the stock controller. You can lower the rates and set up multiple rate modes for each model by programming the Taranis.

[@dronexfun8469]

Hot Sauce Final Boss I found that some models (mould king) are slower when using the multi module, and I read that rates are on an aux channel you just have to experiment with which one. I am a moron and don't know how to do that.

[@Jackal_FPV]

DroneXFun I haven’t had that experience, but I don’t have a mould king.

[@dronexfun8469]

Hot Sauce Final Boss I think I figured it out. You have to set up aux switches. Once you have your switches activated you have to flip switches while you fly to figure out what switch will do what you are looking for. Now the taranis has most of the functions on the stock tx. Not only can you change rates but if you like to you can even flip a switch for automated rolls/flips. Its different with every model though. Thanks a million for the replies man.

[@djs134]

Why is there no multi mode on my irange irx4 plus?

[@jebrc]

Wish I could get mine to work soon as I switch from flysky it goes to 130 and then starts beeping

[@VeronicaSlayzz]

I have the same issue

[@JerryCalverley]

I am really struggling with this Irangex plus setup.

[@Jackal_FPV]

what problems are you having?

[@JerryCalverley]

I've tried setting it up as you mentioned, but I can't get my beebrain or inductrix to bind.

[@TexasWaters]

I have this module as well, have you had any issues with Telemetry at all?

[@Jackal_FPV]

+ReganGTX I haven’t tried using telemetry with the module, I really only use it for controlling toy drones. Everything else I use FrSky receivers. What problems are you having?

[@TexasWaters]

Hot Sauce Final Boss I find that it works with some frsky Telemetry receivers but some it does not, I'm using it in my X9D as I ruined the backboard tried to do the antenna mod, haven't tried it in my QX7 but yeah it works great on my blade inductrix, wltoys v686g and QX90's

[@Jackal_FPV]

+ReganGTX It’s definitely awesome for toys. I’ve used it with Syma X5C and X11, Hubsan 107, E010/11, Nihui U807, JJ1000, Attop A8, MJX X400 and it’s worked great.

[@franklyfpv1909]

Hello Friend!! I enjoy a lot of your videos, you do a great job, I have always used flysky stations, I also enjoy a turnigy evolution, I have enough quads with receivers compatible with these protocols, with this multimodule for the qx-7 could control fly sky receivers type fs a8s, fs rx2a, fia6b etc etc ???

[@Jackal_FPV]

+Francis Fpv Sorry but I don’t have and Flysky receivers to test with 🙁

[@aarem01]

yes (at least the fs-a8s) works just fine

[@mafiafpv3469]

Was wondering the same thing I have 9 flysky quads I wanna fly with my new qx7

[@aarem01]

Does it work with Flysky fs-a8s receivers?

[@franklyfpv1909]

Rob Hi, I'm interested in the same thing.

[@Jackal_FPV]

+Rob I’m not 100% sure I dont’t have an A8S to test it with

[@aarem01]

Hot Sauce Final Boss yes it works, got the unit in today and flies perfect!

[@aarem01]

Francis Fpv yes it works!

[@Jackal_FPV]

+Rob great news!

[@jah5075]

Thank You very much for this video :-)

[@Jackal_FPV]

+Ja H Thanks for watching! 😃