TAROT 450 RC HELI ROTORHEAD & SWASHPLATE | UPGRADING ALIGN TREX 450L DOMINATOR

[@johncgibson4720]

I like that you are free being interchangeable parts from different vendors. I also find every replacement parts from different manufacturers for my 250 gram heli. From fuselage to bolts and nuts. I think it is the first step toward mass production 250-gram drone swarms. Million drone scale deployment is when things start to get into the productive realm.

[@mickeymch876]

I know this video is old but I have a Trex 450L Dominator that was probably flown once for 5 minutes. It's almost a new heli but it has about 1/8" (about 3.2 mm) of free movement of the blades all because of the sloppy swashplate. If I move the blade by hand you can see the top portion of the swashplate "lift" or just start to separate from the bottom portion. I have never seen this before on any helicopter, even cheap junk like the Hausler450 (it's so cheap it has servos you can buy by the dozen for $10 USD) someone gave me doesn't have swashplate play.

[@RCnerd74]

I had the same experience with my Trex450L. This is my last Align helicopter. I will change to SAB I think.

[@trebor1973j]

Thanks for sharing

[@flouserve]

Hello, I have a T-rex 450 LP dominator, do you know if these spare parts can be adapted without problems to this model? Thank you

[@RCnerd74]

Hi. I didn't try this. But frame looks the same on 450L and 450LP. So it should be no problem to use the parts of both frames.

[@flouserve]

@@RCnerd74 Thanks for answering, they are indeed very similar, I already take into account the possible differences. I will first review what data I can find before making the change. a greeting

[@RCnerd74]

@@flouserve That makes sense. Hope you will have success.

[@rcas350pilot8]

Good Vid. They should have this right in the first place. Slop and play in helicopter mechanics is not good.

[@nutleighgrove3658]

Hey buddy, great video 😀 Do you know how much current (Amps) the motor draws at max?? 🚁😎

[@RCnerd74]

35A continuous and 60A peak. Just check the following video for all details of motor and esc. The shop links with all specs are mentioned in the video description: kzbin.info/www/bejne/b4S0pIGvmNKZqac

[@nutleighgrove3658]

RCnerd74 Great 👍🏼 Thanks buddy! ✅

[@Rotorandi]

Nice! :)

[@lechiffre2617]

what are you doing ? - i would fix the align parts and not buy "other" parts with new problems - you cant fly with an imbalanced swashplate, missing two balllinks. upper half spins with full headspeed.

[@RCnerd74]

Flies perfect. No issues at all.

[@trebor1973j]

Is that not an align motor and esc

[@RCnerd74]

No. This is from ALZRC. This is the video about the motor and esc: kzbin.info/www/bejne/b4S0pIGvmNKZqac

[@fastfrank61]

@@RCnerd74 Or origianl Aligin Terex or nothing . Its like you have a cheap old car and put Ferrari on it !!!!!!!!!!!!