Tarot 650 Sport Rebuild!

[@Cmensailing]

Great to see it flying again! Folding props look excellent ! From Melbourne Australia!

[@groundrush04]

Happy to see you new Drone and you.

[@randygrinter2800]

Very nice build! Glad to see it in the air again! I have a 650 Sport also and enjoy your progress. Keep up the good work and keep us posted.

[@alphaadhito]

Nice! Happy to see it flying again :)

[@DrJ3k4lMrH4d3]

Crashing is the best part. It sucks but that's what makes it fun. Good thing you replaced the motor mounts.

[@CFCVal]

finally, been waiting on this for ages

[@pieterpretorius1014]

one thing i'd like to add to my 450 build would be a parachute for incase a motor gets fried. simple piece of plastic with some strings attached just to slow the fall and make sure i don't destroy the frame. i had a 3.5kg nitro plane that crashed because a an aileron control rod come loose in flight. instructor tip stalled it trying to save it. dented the back end of the receiver pack and busted the balance plug. the rest of the airplane was completely destroyed on impact. a week later right before my birthday my dad ordered a new airplane and i was back to flying that weekend. took an entire afternoon at the rc club with three guys helping to get the new airplane in the air. when the first one crashed i was ready to pretty much give up on the hobby. but i learned the hard way that its better to just keep trying

[@nacorti]

Great job, and nice vintage ford! Any thought of putting a companion computer on it?

[@palerider16s]

i like those tri propeller adapters.... can u share the link where you got them?

[@builtfromhome9207]

I just added the a link to them in the video description, but heres the link here too: amzn.to/37BUkqo

[@BrjanBuckmaster]

I am going to build a Tarot 650 Sport with retracts like yours. I bought MN5008 400KV motors but will be using an APM 2.8 controller as my needs are pretty modest. I'm hoping for 15 min endurace using 17" Tarot two bladed props. Stuff has been ordered, just waiting for deliveries.

[@marcusj_farano]

I was looking at the specs of the new motors you are using and it appears that they can run in an 8s configuration. However, you would have to upgrade the speed controllers and get new batteries. I’m not sure how the motors would handle in terms of heat with the props you are using, but it might be possible. Nice job on the drone though! I’m building a drone myself and I’m making videos about it. I’m using an f450 drone frame and it’s a great place to start. I was thinking of upgrading the frame so I can be set if I ever want to upgrade things like motors for a heavy lift drone configuration. If I end up doing so, I will probably switch to a Pixhawk system as well.

[@pierre.a5324]

hey, amazing build . I think for better footage you should set your gopro mode on linear with hypersmooth .And for future acquisition the gopro hero 9 with it's max lens mode could give you the horizon level feature for even better footage. I love your work

[@PcandTech]

Nice flight I have mine just collecting dust

[@builtfromhome9207]

Mine was collecting dust for a while too! felt good to get it out.

[@robertparenton7470]

Also the retractable landing gear? I'm having a hard time finding that landing gear!

[@NicksMind21]

Brother beautiful truck, awesome quad, then you see the end of this video... and you are inspiration! I'm about to build 690mm tarot soon, what gimbal do you recommend? Your amazon link doesn't work. Keep up the good work.

[@dronepilot1333]

Looks nice

[@mariofpv]

Good to have it back in the air! But in my opinion it is still too heavy. Replace the LiPo battery with a Lithium Ion pack. Same capacity less weight. 👍

[@builtfromhome9207]

I will have to look into Lithium ion packs.

[@mtcdrones]

I was considering using a 6s liion pack but was not sure if lipo was better. Lots of conflicting info.

[@mariofpv]

@@mtcdrones a large quad like this will not do crazy acro. It’s mainly for long range, easy relaxed flights so you don’t really need the Amps of a lipo battery. Li-Ion batteries are more suitable for large quads.🍻😊

[@DDRCNetwork]

Thanks bro

[@marinemarine]

In my copter I'm getting 35 min with same 5008 400kv motors

[@mcv-m]

Hello, successful setup. Is the image from the fpv camera the same as in the movie? ...... and besides, your car is in good condition :)

[@robertparenton7470]

Where did you get the two long carbon tubes under the drone that hold the cameras?

[@groomlakefisherman]

Great job. A lot more stable than it was the last time. Were you flying strictly with just the radio or are you doing the autopilot with the mapping software? Looked it you were just using the radio. Will you be doing a video on using autopilot with point to point software? I think that could be an interesting video.

[@builtfromhome9207]

Yeah i was only using the radio to fly it around. I would like to try some missions in mission panner though some day.

[@robertparenton7470]

What video transmitter brand/model are you using?

[@gagantech]

what is the light time of it?

[@djammisaddai]

What do you think about using a DJI Naza V2 controller??? BTW amazing project, it looks so great

[@djammisaddai]

Also about the tri fold adapter, do you have another link where to buy it?? This product can not be delivered to Germany. Thanks for your help

[@jackwritter1302]

I have the same motors and i cannot get them on my motor mounts and mounted.......

[@JohnDoe-eo8gi]

Whats the payload capacity

[@duanebowman9595]

trying to find a 3 prop hub. you didn't list it. Is it better than a 2prop for power and size? will be using tarot 5008 330kv

[@leonardocostacamara]

amigo. você poderia me orientar de qual foi a calibragem dos ganhos da controladora naza (P/R/Y/V). Para eu ter um ponto de partida? Friend. could you guide me on what was the calibration of the naza controller gains (P/R/Y/V). So I have a starting point?

[@bionicaerialfilms]

How big of a camera can it hold

[@robertparenton7470]

Please disregard the question on the landing gear. It comes with the type frame on Amazon.

[@wilfredprins9718]

Is there a difference in performance lifting wise with a 3 blade or 2 blade prop? And in decibels is there a difference? I like the 4 prop 650 for surveying works

[@marinemarine]

What is the maximum flight time??

[@Sabritelol]

Hey man im glad it worked out! Please can you make a video or send me a guide on how to mount the fpv camera and gimbal to the pixhawk! I have the same tarot frame, how can i make the landing gear open with the servos is there any programming thing to do ?

[@gtaitbiz7787]

What's the difference between a MT4110 vs The one you use?

[@GM6DroneMapping]

I've been seriously considering the tri-blade props from a build I'm working on. It looks like they work well. Do you still like them after a couple of months?

[@spacemandaxx]

What is an APAC ESC? Says only for Asia when I check it?

[@ARK-yh1ve]

What is the max thrust from each motor

[@KainLongShot]

Hi, looking for some help. I'm running a similar setup, I'm running the Tarot 4008 330kv motors with folding props, how are you able to stop the props from crashing into the motors when you stop or disarm the quad? My motors stop super sudden and combined with the momentum of the props, crash pretty hard back onto the motor itself. Granted I'm running a dual blade 1555 tarot folding props, they get dinged real bad. I think its in my esc but even "brake on motor stop" in blheli can't seem to fix the problem. Can you screenshot your esc screen or give any advise on my setup?

[@groundrush04]

Hallo from a small town of Germany, I have a question, I started to build a Tarot 650 with Pixhawk 4, my problem is my Pixhawk 4 muted start-up boot sound. How can I regain it, a complete reset?? oder there is anotherway, thanks in advance.

[@mtcdrones]

Experimenting with same frame but 240kv motors with 1555props. Trying to decide on flight controller. Any advice from anyone would be great

[@kshitijkesharwani1521]

Can you make a viedo on programing of DJIN3 flight controller.

[@TheUrbanBeekeepers]

People who pronounce silent letters are a blight on society, lol.