What I WON'T Miss About CLOSING My Shop

There comes a day when Taryl must close his shop to repairs and focus only on videos... That time... has not yet come. BUT! Soon he will be closing and there's lots of things he won't miss when that time does come. It'll be here sooner than later as he's no spring chicken and inching closer to retirement. So here's some things that really peeve Taryl about the current state of the industry and the likely doomed future for mechanics and equipment. What will small engine repair be like in the future? It's not looking good. And here's why.
Subscribe Today for all the latest videos! (Click 'Subscribe' on this channel!)
TFA Skits Channel: / @tarylfixesallskits
FACEBOOK: / tarylfixesall
INSTAGRAM: / tarylfixesall
TIK TOK: / taryl.fixes.all
MERCH: www.TARYLFIXESALL.com
THEME MUSIC: tarylfixesall.bigcartel.com/p...
Get Your Parts From
www.ProPartsDirect.net and Tell 'em "Taryl Sent Me!"

[@JDG1958]

I cut and sprayed commercially for 25 years. My Gravely and Stihl dealer was my go to guy for most of that time. I trusted him. He was honest, sincere and his shop took care of all of my needs. He was just thinking and planning for retirement when his cancer returned. He had been cancer free since the 70’s. I’ll never forget the empty feeling that I had the day he told me that he was closing. You will never fully know the impact that you have on many of your customers. He helped guide me through many of my purchases and repairs and, the best way to properly maintain my equipment. 28 years later while not in business anymore I still have and use most of my commercial tools. Make no mistake, your customers think more of you than you may realize. As you too wind down, I wish you much happiness. I enjoy your videos!

[@cliffordbowman6777]

Unless, you mock them disrespectfully.

[@skippymud]

Well said

[@Dickerson888]

Yea well said.

[@majwor3763]

I feel you Bo...Owned and operated my shop for 38+ years...Still get phone calls from old customers 5 years later. My folks getting old and passing away...Had to deal with all that so I decided to retire because of too many headaches.

[@bbaaspencer1]

It’s called planned obsolescence! I worked on a 2015 Honda Civic in Feb 2023 and the seat belt assembly and air bag module were no longer available! 😢I was forced to send them off to a reconditioned company.

[@BearE9090]

Glad to hear you're not stopping the channel .

[@cliffordbowman6777]

When are you closing. The queer world has taken over THE LAWN MOWER WORLD

[@Francois_Dupont]

maybe picking up one mower from hell from time to time to make a video about it.

[@user-ck7bg3et2g]

North California, have my own small engine shop. I completely agree with this Man. California makes it very hard to complete a paying job. Most people are ignorant to what we have to do. Sleep with the shop on the brain, no rest. Very tuff in 2024. Taryl is a good Mechanic. My ears are open , like my eyes. Thank you young man for your video's.

[@joecurmaci5880]

You don't know how many times you helped me 2 years you're the best brother God bless you and your family

[@freetolook3727]

Remember when you had a Sears Craftsman tool or lawn equipment that was over 25 years old and you could get every single replacement part??

[@Darjan_Spasojevic]

My pops bought a Sears Craftsman mower in 2003. He still uses it every weekend. Great mower. He has changed the deck belt 3 times in 21 years.

[@freetolook3727]

I have an Ariens snowblower I bought new in 2002 and I can still get every part for it.

[@alb12345672]

@@Darjan_Spasojevic I have one with a 20HP Briggs opposed. It runs great, almost no issues. I can live with scuffs and scratches. I was in lowes and some customer was fighting with them about some 3K mower that threw a rod after 30 days. It lost all the oil when it blew and they said its not warrantied because he didn't check the oil.

[@tonydigiovanni9077]

@@alb12345672 what a joke. Blame the customer.

[@eugeneoreilly9356]

​@@alb12345672 any excuse to cover their ass.

[@5ryane]

Retired 24 years ago got fed up with the repair business ( semi trucks and large equipment ) after 30 years. A independent truck owner operator feeds his family with his truck.If I could not get parts fast enough to get his semi back on the road his family suffers.I am better off now not having huge head aches.I some times miss working with my hands.Good luck Taryl .I turned 83 years in may and I don't like what I see happening in this country.

[@chrishensley6745]

You paid your dues for sure and so True what is happening to the once...best Manufacturing...U.S.A.....Now China ownes us and there is NO pride in people like your age group had for certain! Happy 83rd B-Day.

[@AlexJonesWasRight1776]

Sir. Thank You for your hard work . I am 45 years old and I agree in half life time to you I have seen the height and the fall of this country in so many different ways. I totally understand the frustration I restored my 1972 Chevrolet Caprice in 1995 Now I am going back through and replacing a lot of parts that lasted 28 years. Its time consuming and frustrating to find OEM spec quality USA made parts and components. I have spent more time chasing down simple little fasteners or seals than I have actually spent working on the car. Its frustrating and sad to see I end up buying 2 or 3 different interchange parts online from Summit or Jeggs and from someone online and I find the best manufactured item once I get my hands on them and then pick the best quality one based on my physical inspection of the item and then i return the other ones i didn't want. Again time consuming and expensive. Local big chain parts stores are worthless for anything but car soap all they sell is junk made you know where and unless you no the exact manufacture part number of what you need forget about. I live in the Pacific Northwest WA state I'm 30 min from Big City with all of it' "resources" I end up buying online anyway to avoid the hassle and idiots that I have to deal with in person. Don't get me started on how frustrating it is to get quality engine components for a simple very common Small Block Chevy motor. This country's is the Roman Empire , its falling quickly now.

[@5ryane]

@@AlexJonesWasRight1776 I agree with what you say!

[@DTD-no7wl]

Start voting out all democrats beginning with Joe Biden and his incompetent administration

[@williamworth2746]

It's sad my neighbor got a brand new Troy-Bilt few years back and it was throwing belts the first day.

[@jeffburk4210]

I've been doing small gas engine repairs on and off for 45 years, and I still learn things from your videos. Thank you for helping educate me through the years. Enjoy your time.. Thank You, Millions!!

[@idfears54]

Thank you Taryl for what you do and what you have done.

[@Tommyr]

63? I guessed mid 50s. I just turned 66. My body thinks it's 85-90. Staying busy helps keep you alive Taryl.

[@maggs131]

Taryl is the type that won't be sitting in a condo in Florida doing nothing. Hes going to switch gears from obligation to passion

[@penguinistas]

I thought he was a lot younger too.

[@alexjonessellsvitimins]

Some of us fat people found Carnivore diet you may wanna join us for awhile

[@Tommyr]

@@alexjonessellsvitimins I'm not fat. Never was fat. I do like meat of course.

[@alexjonessellsvitimins]

@@Tommyr Ok if you research Carnivore its helping people we should help people find it.

[@oxyfee6486]

I passed on your videos for the longest time, I found your shtick a little silly at first. Then I actually started watching, and listening to what you had to teach. Now I regret not subscribing sooner, for some odd reason you guys feel like family. Thanks for everything Taryl, I hope you continue making awesome videos.👍

[@andyburk4825]

Shtick

[@incognito5986]

@@andyburk4825 Such a Shtickler!

[@oxyfee6486]

@@andyburk4825 Thanks for the correction, much appreciated.👍

[@jjock3239]

@@oxyfee6486 Came to watch Taryl, stayed for the english lesson.

[@oxyfee6486]

@@jjock3239 😂🤣 Class dismissed!😂

[@tweivoda]

I was shocked when I read the title about the shop closing. I was sure it was the end of our friend Taryl. Thankfully I watched the entire video all the way to the end and was relieved he is here to stay. Keep the videos coming.

[@smilinbrad7712]

Retired ( sort of) 13 years ago. I now run a consereige mower and motor service. Just like a Dr's office, I only take the customers / patients I want. And to put it bluntly, I selected the top 25 riches people I knew to get things rolling. As time went on I added more rich people to the client list. ( getting the picture?) and soon I found just the right number of clients to make it fun again. No business cards, no business phone, operating on the down low. I check the cell phone 3 or 4 times a day only. I answer when it's appropriate. On a related note, as soon as Our Gubment gets back some sanity we might see some relief! Gawd a mean tweet would feel goid again Flyin' low in Ft. Worth. The city with a fence around it. Never ever retire in anger, your new customers will never know your pain. Don't show them any. Just take their money. A lot of it.

[@drgdieselfrenzy7707]

As long as Taryl continues to fix all I'm on board. I learn a lot about small engine repair from this channel.

[@stravis3269]

Your welcome here is rats love getting greasy

[@stravis3269]

I love you teryl, those extra characters voices all ways makes me laugh

[@williamcarl4200]

Soon there will be no repair facilities for anything. Remember the TV repair man? That was my dad. He and his loyal men also fixed all the appliances and the stereos too. He even financed used appliances for poor people, allowing payments of a few bucks a month on a handshake. What happened to society in my lifetime?

[@RickaramaTrama-lc1ys]

Yes, I'm 78 and have seen plenty and actually glad I am about push up Daisies but feel sorry for my grand-kids~!!

[@williamcarl4200]

@@RickaramaTrama-lc1ys Notice the numbers, and how banned I am for speaking wrong speak.

[@kameljoe21]

The tv tech went beyond test tubes to computer chips that produce realistic images. Mass production has brought down the price of a TV so cheap that its made with a single board and several wires. Nearly all tv fails require parts that are not sold to the general public because no on repairs tvs anymore. The cost of the parts and labor would exceed the value of a brand new tv. The same applies to fixing mowers and the likes. Its cheaper to swap a engine on something older than it is to fix it. I will use an example that my neighbor did. He said that his wood splitter was no longer running. Not sure what was wrong with it. I told him to just order a new motor and swap it. I told him to pick one up at Harbor Freight for 150 bucks. He was like nah I will just take it to the small repair guy and he will fix it. I told him that he is going to spend about 200 dollars or so for the repair guy to fix it. Which requires loading your splitter on a trailer and taking it to him. He took it too him and his bill came out to be 225 dollars and all the guy did was add in a fuel filter and clean out a nasty tank of fuel. My neighbor is pissed because he could have got a brand new machine that was a big more power than the original one. He even tried to barter with the guy as well. The kicker is he had the splitter for nearly a month before he got around to it. Some of the fee was yard storage till he got to it. FFS I was going to town a few days later and could have picked one up and installed it the next day for free or 20 bucks. Would have been back up and running so fast. He would have not had to pay the fuel to pick it up since I was going that direction. He did the same thing with a mower. I told him that he needed to replace a couple of those plastic guard things on the mower as it was throwing the belt. Google told me this. He spent something like 250 at one place and another 250 at the guy he now goes to only to find out that I was still right. Keep in mind he gave someone 300 bucks for the mower. I had told him to just buy another one or fix the one he has. I think the parts cost 30 dollars.

[@Auguur]

Everything is made disposable today. I'm surprised they even sell parts anymore for anything.

[@David-yo5ws]

​@@kameljoe21As an ex laser & inkjet printer technician, I know exactly what you are talking about. You sound like you have golden advise, but your neighbours character is 'stubborn as a mule'. Don't ever feel guilty because they won't listen to you, it's just the way they are made. But people who want to do it their way, pay a dollar price for their satisfaction. At the end of the day, just walk away happy you offered help.

[@sirvayr]

Teral...we will miss you. You remind me of my uncle. Funny to beat hell. You are a good person. Always clean humor and a living repair encyclopedia. Unfortunately, it has become a throw-away society. Remember when your TV tube went bad, went to the local store and there was a display that had an assortment of tubes, stuck it in and fixed. Nowadays when your TV craps out, you throw it out. Yeah...I'm old.

[@chucksterock]

My main mower is a 1974 Wheel Horse no name 8 hp 4 speed. A vertical shaft engine that is looked down upon in the Wheel Horse community. I have mowed with it. Plowed lake effect snow, more or less ramming into the snow. It came with a tiller that has seen a lot of use. The original engine did throw a rod through the block and the second ate itself somehow, but a 12 horse B&S just keeps on going. I have a collection of old Wheel Horse tractors and spare parts to keep them going far into the future. Congrats on the impending retirement. I have about 3 years to go as a minimum before I can pull the trigger and do something else. I look forward to your future videos!

[@tedoyle61]

When you close it, you'll miss it. While you have it open, people are a pain. You can't win for losing!!

[@calholli]

Gratitude.. we could all use a little more of it

[@willienm]

Can't blame you for wanting to retire but so glad you will still be making videos. Always look forward to Sunday morning video.

[@umajunkcollector]

Teryl will work for yotube sponsors... cha ching you know those dam stupid commervials that interupt and annoy us with crap we hate. Anyone notice that they are more frequent, longer, and over played over and over?

[@derek876544]

@@umajunkcollector yes 283k subscriptions 🤔he's making a bigger wallet

[@carlmorgan8452]

Follow the money 💰 ,losing the headache. But customers will miss you. But I understand. 😊

[@isscotty2hotty]

Totally feel your pain, working on vehicles same pain, same frustration, working harder and harder and continuously buying more tools to keep up with changing fasteners and components, nobody wants to pay and always mad, all the fun gets squeezed right out of the work.

[@hotpuppy1]

EVERYTHING is throw away>>>>houses, cars, appliances, you name it!

[@danbasta3677]

You can thank ronald mcdonald reagan for all of this, he screwed this country up big time in the 80's and we all are STILL suffering from this to this very day because of him. All he did was break the unions, and sent our work over to foreign countries, yet when it comes back to this country, it costs more than what it's supose to cost to get things fixed, then the big shot CEO's are the ones making money while the poor working man gets nothing at all to live on, and after so long on the job, these outfits want to get rid of you so they don't have to pay social security benefits, WHICH ronald mcdonald reagan STOLE money out of the social security benefits fund, and now in days, this so called government has raised the retirement age upwards to the point that you can't afford to retire and they want you to work till you die, all because of crooked, good for nothing politicians and ESPECIALLY ronald mcdonald reagan who caused all this disaster in the first place.

[@sammyjimsmith6100]

People too

[@kevincampbell3943]

You are looking good for 63 and are the salt of the earth.Continue to ramble on.

[@scottcrowley2061]

For a Dactyl, dinosaur, lol.

[@Terry_Baker]

Briggs and stratton is owned by KPS Capital Partners which basically is a golf club and cruise line company. Not a equipment company..

[@MartinParsons-tr6wi]

Hedge funds

[@publicuser2534]

They are starting to build equipment that fails and the only option is to buy a brand new piece of equipment. The company wants to save money because it is more money to maintain a vehicle then it is to sell a new.

[@davidlaws1438]

Yeah and KPS is probably owned by Blackrock.

[@TheOzthewiz]

That makes sense. Boeing is run by "financial bean counters" instead of engineers! How did that turn out? LOL

[@chrisstromberg6527]

Most of these corporations are run by crooks looking to boost short term gains at any cost.

[@Wayoutthere]

The chaos is by design ppl, while we struggle to get basic stuff done Big Corp is running off with the money and power.

[@luvkountry]

This man is the best of the best. Always right on with his instructions and first rate videos. Makes repairs & trouble shooting appear simple and shows the easiest methods of carrying out those repairs. Having the correct tools is always essential and Taryl lets you know where you can get them. Hope to see you in your future videos. Five stars always and thank you for sharing your expertise.

[@andybecker2693]

Good luck with that retirement. My father is 76, owns his own business, and still in the process of “scaling down” and being more selective of work. His health issues are the only thing that’s going to bring everything to a grinding halt.

[@umajunkcollector]

who will replace us boomers? there will be a huge shortage of coloege egekated kids, they just want to play station all day in gramma's basement.

[@jameswordenjr.7628]

I worked in the Appliance Industry for numerous years. We found that products manufactured by China, offered very few parts when needed to allow timely service repairs. I seldom purchase anything that is made in China now. The quality of China Manufactured product (of any type), just isn't there. As the Ole valued saying goes, "You get what you pay for".

[@brnmcc01]

@@jameswordenjr.7628 True but not so fast. Times, as they say are changing, (again). I've found recently that some, but only just some like a small minority of some things made in China that fortunately or unfortunately are pretty good quality. On the flip side, esp post Covid, I'm starting to find some things that claim "Made in USA" are like poor quality, or at least poor quality control (Boeing), sloppily made, or just like the fit/finish is off. It seems to me to be like a repeat of the 1970's era, like with the automotive industry. In the USA, car makers got lazy, made horrible shitty products, the EPA didn't help, but Japanese cars were just as bad if not worse in some cases. Also in the 1970's: Very high mortgage interest rates, high unemployment, and very high inflation, coupled with a couple of useless presidents. Ford and Carter were both a joke. Sound familiar? By the 1980's, Japanese cars and especially Japanese audio equipment quickly became top quality, and USA stuff fell way behind. If we keep sitting here like we are now, you're going to see less and less high end stuff made in USA, the only things left will be things that are simple to make, high profit margin or able to be made by robots etc. Just look at the 1980's Hi-Fi equipment, you can't go wrong with old brands like Sansui, Technics, Marantz, Pioneer laser disc players or today's Toyota, Honda etc, compare a good Toyota with any late model GMCrap. Ha. Made in USA doesn't mean "the best of the best' anymore. In fact, it hardly ever was except for brief periods of the 1940's, 50's and 60's (maybe). In the 1950's my parents and grandparents told me stories of how they made fun of "Made in Japan" on cheap imported junk just like today we complain about seeing "Made in China" on a lot of stickers on stuff sold at Wal-Mart. Well in my parents generation, those things were sold at five and dimes, some of which were started by Sam Walton. My dad's father told me once about the only good thing that said Made in Japan on the bottom in the early 1950's was ash trays. And now look today, or at least from 1980-2010, Made in Japan became top quality, and if we just sit here and complain, history will repeat itself. The problems with USA is not limited to: Hard to find dependable employees, high cost of doing business, lots of regulations that are only selectively enforced (unlevel playing field), supply chain issues, and just general lack of pride in their work. You can look at even a cheaper Japanese car, and see all the panel gaps, and door gaps are like accurate to the last 1/10,000th of an inch, but I have a 2023 Ford Van built with "UAW" pride in Kansas, it's pretty good, but I can see a difference in the panel gap on one side of the hood to the other. Does it affect the performance of it? Of course not, it's just cosmetic, it's not that bad, I've seen worse, but it just shows the "I don't GAF, I'm just here to collect a paycheck" attitude of whoever was on the assembly line that day when it rolled down the line. Workers in China for the most part (there are always a lot of exceptions to any 'rule'), tend or at least used to tend to be more conscientious and take more pride in their work and take their job seriously, and try to not show up late or hung over etc. The reason for that is, at a lot of industrial factories in China before all the Covid nonsense hit at least, was there was always 1000-2000 people outside the factory gates every morning that everyone that worked there had to walk or drive past up to the guard shack every day to go clock in. It served as a stark reminder to anyone lucky enough to have a job there that, if they didn't like their job, or came in and slacked off, that there was 1000's of people waiting outside, just waiting for that one chance that maybe you would make that one last mistake, or show up to work 2 min late, and gone. Today however, workers have caught on to the fact that they're being treated as slaves and now the current thing in China is just refusing to work, and they call it "laying down". It was kind of a silent protest against the latest horrible 996 initiative introduced by Xi, the "Work is 9am to 9pm 6 days a week". How productive would people be, if they were forced to work 72 hours a week. In Germany and France, they proved that people can actually get more total work done in a given year by limiting hours to 35 hours a week, and taking a minimum of 4 weeks of vacation per year. Yes they have to work a little faster and harder (and SMARTER) to get the work done, but they can do it and not feel as burned out as someone working 72 hours a week, but they're working 3 times as slow as a well rested well paid worker in Germany because they're just tired as hell. TL'DR: "Crappy things only happen when good men do nothing"; ie. keep failing to learn from history and you'll be stuck in a sicko version of the GroundHog day movie, enduring the same mess over and over again.

[@TheOzthewiz]

@@jameswordenjr.7628 The problem is...........hardly anything you buy is NOT made in China! Even OEM (not OEM replacement) parts are Chineseum! To find "American Made" products, just walk down the "paper products" isle. You will find GENUINE American made TOILET PAPER!

[@thebrokenspokepoco270]

I’m a parts manager at a dealership that carry’s scag, exmark, cub cadet, hustler, & stihl. Brother I know your pain and can relate. Who would ever think a lawn mower could be so stressful. And the world that we live in were scamazon has introduced us to the “I can have it tomorrow and it’s cheaper”. All I say is that’s fine. In my mind i’m saying have fun replacing it, your going to get good at it cause you’ll do it multiple times buying that junk. I can honestly say too I have been “factory trained” and I have learned more watching your videos over the years. Keep up the good work and I hope you can hang it up sooner than later and enjoy doing what you wanna do.

[@chrishensley6745]

So True man.

[@kameljoe21]

I can tell you that I have bought from amazon and have had parts put on from parts supply vendors. This one part we bought to do ourselves and never go around to doing it and was at the shop and he said he could install it for next to nothing. He called and got the part dropped off. It was in the same package, same box and same everything as the one sitting in the trunk. This is from Napa auto parts store, the part I bought was from amazon. Nearly all the parts sold are from the same vendors, sure there are some really cheap parts out there yet not all OEM or parts supply vendors are better or worse.

[@gregsrepair5623]

Absolutely hit that nail on the head Taryl. This is my life too. Frustrated and overworked on what should be a great industry in small engine repair. Very tough on all angles.. thank you for this video. I know now I'm not alone in this.

[@KubotaManDan]

Taryl your sharing of your expertise is much appreciated, I'm 66 and retired and on a budget. I've been considering a small riding mower, but after seeing this video I'm going to pass. My all wheel push behind still works and I never had a problem with it and it lives all winter long outdoors under a tarp. It has a Kohler engine. But when a shop owner can't get parts, that's enough for me to change my mind about a purchase. Thanks again for all your honesty. Belts & blades sound like a low key way to slide into retirement. Good luck with your new path.🍀

[@PowerEquipmentMan]

We sold our shop in 2020 and it was the BEST thing I ever did! There are way easier ways to make money nowadays. Now, I work half as hard and make twice as much money, with less headaches!

[@endsina1270]

Name the ways thats easier to make money nowadays please.

[@WeSRT4]

@@endsina1270 Something that doesn't require inventory or physical labor... INSURANCE!

[@Guillotines_For_Globalists]

@@WeSRT4 LOL, you think selling insurance is a viable career?

[@WeSRT4]

@@Guillotines_For_Globalists I know so 😂

[@stevewilliams6667]

As an owner and mechanic of a small engine shop,I am extremely busy, make a good living but it comes at a price.Alot of bs in terms of cheap parts, unreasonable customers but luckily small percentage and you work yourself into the ground in order to make a go of it.I laugh out loud when people say to me you are lucky you love your job,I have grown to hate mechanical work and advise anyone to stay away from this industry.

[@sparkyjerred419]

It's not just mower parts. I'm an electrical contractor & many basic electrical parts are on backorder.

[@moparnut6286]

100%

[@garyalford9394]

Thanks Biden& Dem's !!

[@santaclause2875]

True. Go WOKE, Go BROKE.

[@mountainplumbing]

Plumber Same thing. Parts are at least 50% higher than just a few years ago. I can't afford to do my own Plumbing Work. Something has to Give Soon.

[@Wayoutthere]

It's by design ppl.

[@openBrandon]

So happy you’re not going to stop videos, thank you so much for all you do to help us Taryl!

[@ronbesig4307]

Just a home owner here,. I know I speak for many.... Hate to see you go but, I am really happy that you are going to keep your videos going. You are my goto guy when ever I have a problem with equipment.Thank You, for all you do. Good Luck with your retirement.

[@TimeWarpTom]

You're right on the money on Availability. I'm having the same issues. Breaks and Scrapem has been bad, as has Schtenz. When I order from Schtenz, half my order is on back order, no more free shipping over x dollar amount, and they've promised to send their rep to my new shop multiple times and she's never showed. Angry customers are a huge issue with waiting on parts. Plus, most of the shop owners I know are Taryl's age (Taryl and my dad are the same age, learned the trade in my dad's shop. They're all hanging it up and retiring. I have been 3-4 weeks out all spring, even with hiring a full time and part time mechanic. It's crazy times for everyone still in it, I think.

[@umajunkcollector]

and now Honda crap... Honda, prices go up, quality goes down. I see many Honda clones on the curb, including mine, and I don't bother with them. What happened to Tecumseh?

[@donaldwcash4653]

I quit working on other people's Mowers because of the same issues you mentioned. The industry has gone to crap. As always, great video.

[@michaelbenoit248]

It’s the whole parts industry. Parts quality is garbage. I bought a set of batteries for my F250 in 2020. 4yrs later one of the batteries is still working. I had a set from advance that took a dump only 1.5yrs in, & resorted to the ones I took out cuz I didn’t want to drop $300 on batteries again. The 4yr old battery is from Walmart. I used to be an auto tech, & we had defective parts except OEM left, & right. Duralast batteries are the worst. We’ve had several that were less than a year old, & it got replaced. We had bad power steering pumps, steering racks, & defective alternators out of the box. The advance auto parts we had failed when we replaced them last. We then ordered the only one in our city I drove nearly an hour one way to go get it. Ever since then we always go to the dealer. If it’s back ordered we tell the customer, & if they ok the aftermarket parts then we do the go ahead but we can’t warranty it as long.

[@mikehagan6576]

Thank you for all the great videos Taryl . I'm not a mechanic but try to fix things my self and you guys are so much help. I'm 68 and a semi retired truck driver. Go ahead and retire and do things you enjoy. Good luck to you and all the crew. I will still be watching, God bless ❤ There's your dinner 😄😄😄

[@jaryljackderriere1232]

Wow, Taryl! How exciting! Last time I stopped by for a visit you told me about your plans stop taking in retail work and only produce videos. And now you are moving forward with those plans. I'm so happy for you and the gang. You've come a long way and now a new chapter in your business is starting to unfold. I look forward to see it all come to fruition. Best of luck to you.

[@drfalcon4102]

due to things beyond my control. I was forced into retirement in 2018, I was 63, after 50 years in Automotive, Im tickled to have gotten out of that,, now after retirement,, I started flipping old lawn equipment,,,, did it for 2 years,, finally gave up, as you stated, PARTS!!!, its just not worth it anymore..

[@stevebrueggen800]

This episode really resonated with me. I was in this business for almost 40 years. I saw the decline in service and support happening 20 plus years ago. I retired from it in 2013. I see that it has gotten worse (parts quality, availability, and timely support) from the factories. I loved being in the industry in the 70’s and 80’s, but damn glad I’m not in it today. Taryl, I hope you don’t leave us entirely. 😢. We still need our “Taryl fix” on Sunday mornings.

[@andrew4403]

I feel you there I've watched this man for years and learnt a lot from him. I repair stuff myself fix mowers up and sell them. It would be nice if he would continue all of his. Taryl fixes all skits.😊

[@joswaldomendoza]

Well Taryl, thank you for sharing all your experiences. I am tinkerer your videos as well others, got me to start working on my Stilh ms311. I made lots of mistakes but that is how I learn, your info is appreciated. If you want slowdown, that is totally understandable. Best of luck and I know that many of us will miss you videos. I also agree that companies are getting greedy and engineering replacement work into an expensive experience or impossible event. It's like talking to the cell phone companies and trying to keep your old plan.

[@1425race]

You're doing the right thing Taryl, as long as you keep your sense of humour and continue making videos your subscribers will continue to grow. I only feel sorry for some of your regular longtime good customers who rely on you to keep them going but I'm sure you will continue to give them good advice. Without experienced, knowledgeable and , above all, practical people like you I would never have had the confidence to tackle my own small engine repairs and complete a job siccessfully. All the best from a Kiwi subscriber.

[@user-on2lr4hu6q]

one door closes another one opens may god bless taryl and friends

[@200HOetec]

That is what it is like to fly on a new Boeing aircraft.

[@DarkVegetaman]

This is why I have learned to work on my own equipment thanks to channels like yours Taryl. Mostly push mowers with old briggs on them but also a John Deere GX85 and a few smaller riders. Parts is still such a headache. Fortunately i have a spare mower in case things go wrong.

[@jeffvickers9390]

Same here. I bought a mower for the engine so I could pull mine and re-ring it, it’s a great bagger and I need it for fall leaf cleanup. Because of all this spare parts controversy I’m going to keep the old engine for a spare instead of putting it back on the older mower and selling it.

[@TheOzthewiz]

I still maintain my 2005 MTD "Yardman" 46" rider. Thankfully, parts are STILL available. Although, so far I have only needed the "wear and tear" items, like belts and an occasional bearing or two. The 20yr+ old "breaks & scrap-um" mill STILL runs near-new. I still haven't changed the plugs and it drinks about a tablespoon of Dinosaur Neckter in a season! The engine MUST have been built on a Wednesday! LOL

[@chevy4x466]

Small push mowers r king. Run em for ten years or so and buy another for $300-$400

[@johnsanders5641]

You are a great guy and I love your personality my friend and everything in this video makes perfect sense..We live in a crazy world today and the small engine repair has definitely went in a different direction with parts and availability. I totally understand where you are coming from and couldn't blame you if you do decide to shut down the show. I love watching all of your videos and will always continue to do so. I am from Birmingham Alabama and run an onsite repair service and after being diagnosed with leukemia almost 2 years ago I have slowed down a lot and only take on easy small projects.. Either way try not to get too stressed out and only take on easy projects and just take one day at a time. Love you Taryl and have a blessed day..

[@laarshegdish6016]

Taryl, I feel your pain and I don't blame you one bit. I used to do television and stereo repairs and ran into similar issues: parts not available, customers bringing in basket cases that had one issue on the surface that was caused by another issue before that one and so on. Those customers were the ones that often did a lot of damage to the unit before bringing it to me, and they expected a miracle for cheap. I'm glad you are going to keep making videos, but won't have to deal with all the stressful things you pointed out in this video. Wishing you all the best in the days ahead, Taryl!

[@KevinMn1]

I think this episode was a therapy session for Tarryl 😂

[@maggs131]

Yea he was venting here lol

[@mattdillon853]

He's telling the truth even if it is venting.

[@publicuser2534]

It’s a good therapy session and a good lesson on the state of the industry.

[@taterbites]

Looking at reality in the face!

[@mikewerner3797]

That John Deere mower is a homeowner grade mower, that owner(borrower) used like a bush hog. It’s not designed for that kind of use(or abuse)

[@davidpotter9462]

I retired in 2018 from fixing mowers except for close relatives and myself. I was working at a shop in town. I had everything in the shop fixed, along came Thanksgiving, and I told them that I thought I was just done. I was getting my social security check by then, and like you said, didn't need all the hassles and stress associated with the job. It was almost as good a feeling as when you played hooky from school and went fishin...But in a way it was better because I wasn't going to get into trouble for skipping. Most of the stuff they are making now is garbage anyway. I don't miss it any. 😅

[@TheOzthewiz]

I feel the same as you. I was FORCED into "retirement" at 64. I worked as an Electronic Tech for a small "Electronic Power Equipment" manufacturer in Minnesota. The company (Mom & Pop) was bought out by "Sensata". Sensata decided that they did not want to REPAIR old equipment, instead wanted to sell ONLY NEW units. I had to start collecting SS early, but things are working out okay. I live in Clark County, Wisconsin now where OLD people can live CHEAP. Public Housing is only $602/Mo (30% of GROSS income). We have a 2-bedroom house with garage and NO maintenance EXCEPT lawn maintenance and snow removal, hence the NEED for a lawn tractor and snow thrower! Healthcare is VERY AFFORDABLE too! We live in Thorp, a one horse town where they "roll up the sidewalks at 9PM (even Friday), BUT there is ABSOLUTELY NO CRIME to worry about, you hardly ever see the ONE cop car that the city owns. I believe "Officer Bob" only works part-time! I think they should rename the city "Pleasantville", it is STILL in B&W, but hopefully go to "color" one of these days! LOL

[@phantomcharger568]

Been watching you for years, worked in a mower shop when I was a kid, your stuff reminds me so much of the jokes and good times with the ol guy that owned the shop back then. I'm so grateful for your channel here.

[@timpope1221]

Wow I was worried, so glad you will still be making videos I sure learned a lot from you over the years so much so when I retired from EMS as a Paramedic for 30 years I opened my own repair shop and your exactly correct parts are harder to get they are more expensive and they are usually made in china, thanks Taryl and enjoy your retirement !

[@harveysmidlap]

You have to get with the times, like when I go to the doctor for a physical and ask about a skin rash and she tells me I need to schedule another appointment.

[@oldmanwinter3597]

She didn't offer you a free "Vaccination"?

[@backachershomestead]

Or ask if your wife knows.lol​@@oldmanwinter3597

[@obc1500]

Or go the hospital and being handed an iPad to triage/diagnose yourself….

[@mikea5923]

@@oldmanwinter3597that’s got nothing to do with this, leave your politics out of here, no one wants to hear it.

[@mikea5923]

Get a better doctor. My doctor went the opposite way and prescribed me stuff for a skin condition I wasn’t there for.

[@maddog6493]

I retired from large toro dealer ship many years ago ,people started dropping off equipment at my house ,I told everyone no but I would leave the house ,come home and there would be a dam lawn mower with a note on it won't start ,sometimes I would not even know who dropped it off, i still get calls in spring ,I got all kinds of job offers from dealers wanting me to work for them but I had my fill of it .I just putz with my own stuff now ,and you are sure right on with parts availability its tuff ,the manufactures started shiting on the dealers years ago....glad you will still do videos ,

[@XenaTheQuadCamBikah]

I’m up here in New England and have been doing basic seasonal service on mowers for fifteen years now and even then sometimes end up with bs issues such as these late model John Deere’s that the deck belts keep falling off because there’s no friggin adjustment. Just serviced one that only has 23 hrs on it. And I’m not a welding fabricator expert like you. Too many annoying issues with some of these machines. Glad you will still be on YT! Have received lot of help from your channel over the years. 👍🏻

[@brightonsmallengine140]

I feel your pain and exactly why I closed my shop 6 yrs ago, kept my good cash customers and do not miss the stress one bit ,thanks for all the vids and tips and good luck in the future.

[@sandrosbackyard343]

God bless you mister Taryl! They still need you out there so stick around for another 10 years at least!

[@dirtyburd71]

I understand. Back in the 80s, I was a general mechanic at a small two man shop. I saw the writing on the wall and the future of the auto industry, making electronics take control of everything. I enjoyed working on mechanical things but electronic diagnostics wasn't my thing. Ultimately I ended up as a sheet metal fabricator and did a little welding and such. I have now retired being just one year older than you and I'll tell you, the stress of customer problems that seem to grow once you get involved is OVER!! 😊😊😊😊😊 Happy retirement!!

[@anthonytosi4218]

I'll tell you this even the ATV's these days have an ignition control module but with small engines or car or semi, you need air fuel mix and spark or for diesels you need fuel flow oil pressure and the ficm to be operational to fire the engines but yes if there is something electronically wrong that doesn't turn the fuel pump on which now on gm' s and fords there is a solid state relay either in the passenger compartment fuse panel or the engine compartment one and these eventually go bad so then you have to bypass it and install an external relay temporarily or you just put the fuel pump on a switch like I did with my excursion. The fuel actually has 2 relays due to the inertia switch but the main fuel pump relay is the solid state one inside the fuse panel, very bad idea on gm and Ford not a good thing to do they should just have made the fuse panel with a relay you can just plug into the panel, because these panels new are like $300+ and used ones can be $150, if a mechanic has time there is always one add on slot for relays but would have open up the fuse panel and take the 4 wires from the solid state one and get oem relay connectors and plug them into the open relay slot holes for the permanent fix, ford and gm did this for all there suv's and trucks, but with the excursion 2000 to 2002 had external fuel pump relays then in 03 it was changed to the solid state one and for the power stroke engine as well the only difference is you have one fuse for the ficm and the other fuse is for the fuel pump and they are in different slots but the fuse panels are exactly the same

[@whathappened2230]

Thanks for letting us know what your doing Taryl.. We all like and respect you out here man!

[@neilstern7108]

Im glad you will be around. I have a craftsman dlt 25h its a gem and it will start only if while i engage the starter i choke it just for a second and she pops right over. Cant leave it on choke long at all. But then i can get it to run more smoothly if i tweak the choke a little. I have had this mower for 7 years used put together by a guy like you. Thing runs beautifully, and engine was rebuilt he was proud about putting 2 together to make it run burns no oil no oil on plugs at all. I just cleaned all contact's and was going to check the gaps on valves. But no sputter no backfire. And after ur rant on how hard it is to get parts i was thinking of getting new coils and do that soon. Great stuff

[@SunriseLAW]

Needed a fuel pump for my 2003 Ford Focus last year Ebay had Bosch fuel pumps for $38. I called Bosch, they looked up the item, confirmed it was a FAKE BOSCH PACKAGE. The really crappy fuel pump came with a 1 year warranty. I paid $115 for the part at a local auto store, it has a lifetime warranty.

[@calholli]

You just gotta set the right expectations Tayrl.. When you tell them that you have to use scamZon parts.. Just make it clear that you can't warranty them....... When you get basket cases from the other shop-- just make it clear to the customer that the price may snowball and talk them out of it that way. If they still insist and don't care about the price-- then you can take on the job without stress, because they already know that it's coming. Setting expectations is the key to keeping this stuff stress free. As far as getting too much work-- you could hire another guy or two. :) ... but otherwise, it's a good problem to have.

[@halleffect1]

for basket case jobs get at least 50% up front, non-refundable

[@markw2266]

My buddy has a sole survivor tooth that he wore to introduce himself to the GC on a construction job. The guy smiles back with the real thing. That is a joke gone wrong! Congratulations on retirement. I really appreciate all the helpful content over the years.

[@joeturner2375]

I worked to I was 70 years old. Had all the same problems,a yard full of machines waiting for parts makes no money and no where to put fresh work to keep the wheels turning over, I am retired a number of years and I don’t miss it,no longer pushed to breaking point over the summer and wondering where my next meal is coming from in the winter, Taryl I enjoy your videos understand your problems and wish you a happy retirement.

[@daveo532]

I understand. I spent 28 years as a marine mechanic, factory certified Mercruser tech. ( I do know shit). Had my own shop for 17 years. The people that pissed me off the most were ones that came into the shop,picked you ear for a half an hour, asking the same stupid questions, and don't spend a dime with you. Glad to be out of it. I'm almost as old as you, now I have a part time job at one the largest auto parts chains (66K stores). And even THEY have trouble getting parts, and I swear half of them come back for warranty replacement.

[@Montana_horseman]

I've been watching and learning from Taryl for a long time, he's got me through a bunch of mower, whacker and trimmer ordeals. When I get 'em fixed I say: "and there's your dinner" 😅 The Led Zeppelin reference just reinforced I'm hanging out on the right channel. 👍 🌾🐀

[@davida1hiwaaynet]

Taryl, thank you for sharing your feelings about how business is going. I can sympathize with you. I work for a major OEM and do field service; much of which is remediation of other dealership's bad workmanship. Those are the worst jobs ever known to man and I dread them like a two-week case of the runs. I will look forward to your new content working on what you want to and not the junk random people bring in! As much as I love my antique refrigeration repair work, it's still just a hobby and I only take in what I want to and pick and chose the interesting ones to make videos about. If I understand correctly that is what you're planning! Thank you again for the great info you 've shared so far.

[@terryhansen5928]

Yaaay, you're not going away! You're the go to guy to help us repair our garden machines. Gid bless you Taryl.

[@user-wx8ls2ei5p]

I love being retired, and you will too. I really appreciate your channel and I've fixed my mowers several times with your help. Good luck and since you're not a woman, I can tell you to CALM DOWN......

[@crossthreading8157]

Good reputation and pride is hard to come by these days. You make a great consultant no doubt.

[@LincolnSP150]

Great Video, .... kinda sad but true in this throwaway world. I fix my own and keep patching it up forever. I have several riding lawn mowers, only one if which I have working currently. The one I use is an old 50+ year old 5hp .... Simplicity Wonder Boy. When I garbage picked it years ago. It had a hole in the block from throwing a connecting rod through the block. I took it all apart, reshaped the block and made a heavy steel plate the same shape of the side of the engine, made a rubber gasket and drilled a mulitude of holes to secure this large plate and gasket to repair large hole in block. New Rod, piston and rings and this thing still cuts grass rather well after fixing 20+ years ago. It also climbs my hill usually rather well too. Got to add oil each time I use it, but it does the job well. It Ain't much to look at, but I like showing the patch on the block that fixed an other wise junk Brakes and Scrapum Engine. Most people .... don't understand, they buy new and throw away the old.

[@kaitlynhelton4480]

Been watching your videos since 2014 I think, glad to hear your retirement is working out congratulations on that, also glad to hear you still making videos, learned at lot over the years, ready to learn more, thanks all y'all's head work!

[@johnhowell224]

you need a hug Taryl!

[@mikespain8655]

I use aftermarket parts primarily, and have few availability or quality issues. Set the expectations clearly and up front with the customer. Be as selective as you need to be. Be transparent, honest, and keep communication lines open, and fewer problems will result. There is plenty of good business out there, no need to chase bad repairs or customers.

[@Carder97]

I really appreciate what jr slip and taryl do here !! Thanks for all the laughs and content .Yall are some great people and i will continue to support you here ,With merch and visiting when yall are on the road!

[@johnanthony2545]

Thank Taryl for the update and vent session. I’m retired and miss a few things but don’t miss a lot of other stuff. Still busy hands on guy but the stress is way better.

[@justplain8793]

I love grumpy Taryl! I hope you don't calm down in retirement.

[@garyalford9394]

Maybe you can get your teeth fixed !!!

[@mitchelloates9406]

Back in 2017, when I was in need of another riding lawnmower, I went with a Troy Bilt TB 30 R, one of the 30 inch small rear engine riding mowers with a single cylinder 13 HP Breaks and Scrap'em. It was all of $900 back then. Why did I buy the smallest, cheapest, simplest, and arguably not the most reliable mower? Because it was all I needed. It's small and light enough, that the times something has went wrong with it, I can easily move it around by myself, without having to call in another 2 men, a small boy, and an elephant to help. And being 65 years old now, heavy physical stuff ain't getting any easier. It's simple enough that I can literally disassemble it down to the frame with nothing but hand tools. And having spent 45 years being a mechanic in one form or another (20 years in the Navy back in the engine room, and another 22 years building Class 8 semi trucks), I've got the tools and the expertise to work on it myself - provided I can get ahold of the parts - but being retired now, I've got the time to chase down the parts. I didn't need a huge 50 inch cut 20 HP riding mower with headlights, a hydrostatic transmission, a cup holder, a cell phone holder, an armchair with a back massager, and that cost more than my first new car, to impress the neighbors or drive cross-country on. I just needing something that would fulfill 3 basic requirements - I could sit on it, it would move under it's own power - and it would CUT THE BLOODY GRASS. Or as you would say, I didn't need a Space Shuttle, I just needed a lawnmower.

[@stsid1]

I know what you mean. I see so many of the old snapper rer for sale cheap cause they want something real big with all the bells and whistles. But that old snapper will out last that new mower ten times over. So simple to repair and not much breaks on them.

[@williegillie5712]

I’m a home mechanic. Went to vocational college for it. For me to keep up on these newer cars ya gotta have a scanner and know how to use one. Lots to learn but knowledge is in short supply like parts are. I wonder where it all went south? Seems like right around the time of the plandemic. Oh well folks stick together and help each other out. It’s the only way to get through the whole debacle.

[@Deucealive75]

All of the 30 inch riders are now at least $1900. I was worried about quality and didn't get one.

[@micky8ball]

Looking forward to more videos Taryl. Always a great watch. Thanks for the positivity in this grim repair future!

[@jeffreyarthur1056]

Keep rambling on, man I get it I do that same stuff every day, the latest was a "simple" clutch/throw out bearing job on a Mahindra/Mitsubishi tractor turned into a month long night mare thankfully it was an understanding customer and he gave me a $100 spot tip for my efforts and troubles.

[@timwren4793]

i agree with you, i was n the outdoor power equipment repair industry for 48 years, just gave it up december 2023 and retired, because you could no longer get decent parts and all the issues with aftermarket parts and OEM parts thet were no good, you just cant make money at this anymore ! and a zillion other things just not worth it anymore !

[@Jimmy-yq5kg]

I own a small engine repair and the last 3 years have made me hate the business. Watching this video was like watching myself complain about the business. Too many brands and too many people that abuse the crap out of their machines and then cry like babies when it breaks and their grass is 2 ft tall. I love the geniuses that try to fix it themselves from watching KZbin. Then they half ass it back together and call me. Then I got to take it apart and figure out what they lost and did not put back in. Then you ask them if they took it apart and they play stupid. They usually lose the parts that are specific to the machine model that you can't find unless you got a junk one in back. There is also too many companies you have to do business with to get parts. Places like stens is good for the basics. But if you need a shroud or some brand specific part then you have to deal with the manufacturer. Too much time being Dick Tracy finding parts. Another issue I have is from all the years of buying inventory combined with the constant changing of equipment designs. I have shit tons of carb kits, air cleaners, carburetors, cables and many other parts that I will probably never sell because nobody has anything that it will work on. Occasionaly, I get a machine in that I can use the parts in. But it is so far and few between that I will never recoup the wasted thousands in obsolete parts. Another issue is guys on craigslist offering to fix any mower for a set fee of $50.00. Can't compete with some clown working out of his moms 1 car garage. Sad part is, he is screwing himself as bad as he is screwing guys like me. He is just too stupid to know that yet. He is also training his customers to get accustomed to cheap prices. Then when he has a shop and insurance and inventory to pay for, he will find out right quick. He will go from fixing a mower for $50.00 to suddenly billing the same client with the same machine $150.00 or more. They will soon be going back to craigslist to find a new mower guy!

[@motoman5023]

Yes been a mechanic in the business for 25 years toro exmark dealer. Same stuff on our end also.

[@borod5571]

I agree 100% with You. I have been in this industry since 1985 been owning the Shop since 1990. The few yrs has been the worst ever, it has put me in dept, '' we had to make a loan to keep the business going'' The last 3 yrs i seen 4 shops in the New Orleans area closed down. We can't find nobody who can work on equipment . ' No One wants get in this Industry '' The other problem is i am in my 50's now and this is the only thing i ever did, and i don't know anything else. I will keep doing until they turn the lights off and kick me out the building. I won't give up. Long Live the Brotherhood. We are a dying Breed

[@dweible]

Love to see you making a decision to life a happy life Taryl! Keep the content coming, I know I'll watch still. 😊

[@gdismine01]

Dear Taryl, the reason you are backed up with repairs is because of one thing. Shoddy work coming from the manufacturers. The personnel producing the parts no longer has pride in their work. So junk goes in and junk comes out. exasperated by the even worse garbage coming out of China and other asian countries. So don't feel bad because this is happening not only to lawn equipment but to every other industry. We are all feeling your pain. But I am not sure we have had enough pain yet to ban together and change our futures. Good luck going forward, as long as you make instructive videos I will watch them and learn. Thank you.

[@mddale]

Also, the end-user is now way more clueless and inept. No understanding of how and why things work and his responsibility in the process of reliability.

[@oxyfee6486]

⬆️ Bingo, i have been fixing all my neighbors equipment, they don’t have a basic understanding of how things work.

[@rockyrococo2584]

It's not the workers not taking pride. It's the heads and investors who own the company who don't take any pride in their product and pay their workers peanuts and look for the cheapest garbage material they can get away with and bank on replace over repair. Stop blaming workers, it's not them, it's the ownership class

[@cydonianman]

I see it where i work as well. I have same fellow employees I've worked with for years. Now we're under a new foreign ownership and the company started getting some of the parts from cheaper vendors and also outsourcing some of the work. We still take pride in our work, but corporate has made it nearly impossible for us to continue putting out the quality we once did. Our former company's ceo would be turning over in his grave if he knew what it has become. Sadly, the only thing that remains the same in our product is in name only. Welcome to globalization.

[@cayminlast]

I'm very happy to hear you guys will still be making content, maybe some new 'Taryl's Toys" projects videos are coming.

[@3sparewashers-lg3gf]

Pal-o-min-o! Pal-o-min-o! Pal-o-min-o! Pal-o-min-o! Pal-o-min-o! lol Pal-o-min-o!

[@baldeagle242]

I feel your pain, my friend. I couldn't imagine doing this full-time in a repair shop setting. It's bad enough in a home hobby shop setting. Nothing but the truth in this video!

[@REVNUMANEWBERN]

Worked @ the Snapper McDonough plant when we were bought out by Simplicity & then B&S, ONE DAY ( 2014 ) we got a shipment in from the Savannah Ga. port, we opened the door of the container, the manifest stated EVERYTHING in the container was from the SAME company IN Shy Na, there was at least 8 or 10 different well known U.S. company brand names on the packages, ALL of the shipment was Generators. ALL of the DIFFERENT brand names came out of the SAME factory.

[@johndenver8574]

It's the same thing here in thee automotive sector as well. Trucks only 10 years old need simple parts and either not available or long back order. For simple common parts.

[@reedbreneman9443]

I closed my shop last july.Had a huge auction and sold out all inventory and most of the tools.I sold because we moved out of state to be closer to my oldest daughter and grandson,I like you am close to retirement,I dont miss the shop, I work for Walmart now in management,After taxes I make more in my pocket now than I did working for myself without the headaches and I have very affordable ,Very good health insurance.I have paid time off and paid sick time off and I work a 8 hour day 5 days a week...... I actually enjoy going to work.I miss bringing the dead mowers and such but only the old stuff but I dont miss the work load or the customers or the shop at all .I do some repairs where I live now for fun and a couple extra$$. That started because I fixed my neighbors mower and is trying to steam roll into another repair shop,I am not allowing that,I have bigger and better things ahead of me like MY Own time and MY own toys!!

[@garybaltzell2379]

So glad you are getting rid of all your hassles but are continuing to have fun making great, helpful, videos!

[@Midnight266]

Hope you enjoy the retirement, keep active as you can and have fun with life...thanks for all the videos you have done over the years.. it's been great watching your videos learning so much...

[@michaels.niquette3879]

I can't blame you a bit for wanting to get out of it and I'm glad you will be still doing your videos . Good luck on your retirement and thank you for making all of your videos

[@raylidell3613]

Thanks Taryl for THIS video and for all the others!! Good luck on your new path. You deserve a break. Youve taught many of us "grass rats" how to keep stuff running. We will forever appreciate you humor and your archives. Blessings to you as you go forward

[@edwinkelley5193]

Hey, Closed my shop about two years ago. It was the best thing I've ever done. Went through the same things. I just work on one customer's /friend machine, and I love it .

[@watermanone7567]

You are right, I closed this summer, except for a couple of longtime customers. I waited for a mower blade for three months for a customer. I am 79 years old and I am done. Thanks for the video.

[@DavidSaintBump]

The changes are disturbing. I'm considering shutting down, parts are impossible to find on the new equipment. No more shop packs.

[@bentullett6068]

Ref my comment its a global issue. I work for a garden machinery dealer in the UK as parts department guy and I am starting to find getting parts more and more stressful and domestic homeowner customers are becoming less intelligent every year. Its when they ask me can you obtain the part on back order from the USA quicker and at some point I am going to say if you pay me money for a plane ticket to and from to the USA I will quite happily get your part. I doubt they will want to pay the ticket carriage charge.

[@closertothetruth9209]

​@@bentullett6068we dont make anything anymore china etc make it all, and now we have the crap with iran influencing shipping times and costs. for atleast 35 years our idiot western leaders enabled our own corporations to abandon us . a country that does not manufacture its own goods is doomed.

[@thebigwhitehorse6228]

@@bentullett6068 ...blame the intelligence of customers on computers. Our parents and grandparents that were knowledgeable about the outdoors, the value of hard work, the value of time, and the value of fairness has been replaced by Karens and scammers...🤣........Time to go make me a electric lawnmower out of $300 worth of other people's trash...✌😊❤

[@TimTurner115]

Congratulations Early. I'm 63 retired. I just play in the woodshop and with my old cars. Oh and work on my time cutter mower.

[@danielalamo2075]

Congratulations on retirement! Thanks for all that you do for me!!

[@user-qn9lf9vk5s]

Thank you so much for everything and for sharing your knowledge as well as posting your videos Steve shobe

[@brantborer6359]

That's great Tarryl!! Enjoy your years left!! Being happy is the most important part of life.. and fire it up🔥💥

[@robertmedina6875]

We are having the same issues with the auto industry 😕 you need a lawn mower junk yard ... Cause that's going to be gold❤

[@wg4405]

Your right , I have become friends with a lawnmower repair shop outside of Lagrange , Texas and he has a lawnmower salvage yard and it's mind-boggling . He had a old roper garden scratcher on Craigslist I need parts for mind and when I pulled up to his shop I could belt what I saw out in the cow pasture .

[@santaclause2875]

Elkskins is sittin' on a GOLD MINE !!!!!

[@laserflexr6321]

I agree, snatch up as many old ones as you can stack up because there is going to be demand for ones that can be given a good once over and last for 10 years instead of replacing every other year.

[@andrewlisenby9693]

That is what fine Ms. Chickanic said!

[@alisonshubrook]

I here ya Taryl I’m dealing with the same thing as an outboard mechanic Good plan on passing on jobs rat bog you down! Keep on keeping on. Love your videos👍🏻

[@genedoddy3327]

Thanks for sharing. This was very entertaining and informative. Hope you feel better getting that frustration off your chest