Epic $100 Mower Flip - Engine Swap

[@TarylFixesAll]

Support the channel! Grab yourself a Taryl T-Shirt, Coffee Mug, Tools & More! Shipping Worldwide Daily from the Taryl Apparel online store! www.TARYLFIXESALL.com

[@GranpaTruck]

I just shared your video with my facebookers and said that you were the greatest utuber EVER. If I get my simpilicity with the proper 14hp running I will be really stunned by how easy you made it for me to understand.

[@ristomattikolsi5711]

"This mower is out of sight" "I told you Taryl is the man baby" (Magnum Force 1973 with Lt. Briggs)

[@dylanerbstoesser6972]

This guy deserves so much more subs he is funny, informational, experienced and I learn so much more than I ever have on KZbin.

[@ionracer24]

you gotta interact and answer questions from ur viewers to get subscribers

[@DeezNuts-cm7bw]

I've shared his channel with my whole three friends lol

[@timothymoore4000]

@@ionracer24when you work as much as he does, Taryl personally doesn’t have the time to do it. Although he could have a web manager to do the responses.

[@JeffreyRodante]

I'm sorry I got enough of that junk

[@sixteenstone007]

Best KZbin channel ever! Hour long video with no ads, educational, comical and entertaining. Much appreciated and you deserve way more subs

[@tnekkc]

As stupid as Taryl Fixes All is.... the guys who love it that I know are the smartest engineers. They quickly figure out what a bonanza it is.

[@kelliegrase4658]

@Mark Leonardo you’re a creeper 👀

[@officialgru420]

Ya

[@douglaswindsor120]

What do you mean no adds 15 minutes in and 3 sets of adds

[@GunfighterWyo]

Taryl does such a great job. He talks a lot of silliness, but he has years of experience. People always like to find fault, but don't do it themselves. Go Taryl. I have used some of his products on our RV which worked really well.

[@charger19691]

Taryl is a real mechanic, he can take a substandard part and make it a high quality part that will work much better in the long run. He just doesn’t replace parts. That’s a great mechanic in my opinion! I have a 2018 Simplicity Regent tractor very similar like this but it came from the factory with a 22 h.p Briggs V-twin Pro model engine. It’s got a ton of power for the 38 inch mower deck.

[@jaryljackderriere1232]

You guys are some of the most creative folks I know. Excellent job on the engine swap and fabrication. Great tips all the way through the video.

[@dannylister558]

I like the way you take a complicated change and simplify it so even i can understand it..thats a good tasting dinner..

[@briggsdidnotstrapem7699]

i love your videos, you are the Michael Jordan of Small Engine. your carb vids has helped me so much, i have not scrap em, and have been able to fix em, thank you Mr. Dactor.

[@donmoore7785]

In 1986, I bought a Simplicity lawn tractor new, with a snowplow and deck, for my mom - who lived 250 miles from me. It worked fairly well for 15 years but it wasn't anything to write home about. I had no idea of what a real tractor was until I happened across a Simplicity garden tractor from 1974, used. It has a 10hp cast iron B&S motor (large enough for my purposes) that will be running long after I die.

[@Mr_Tecumseh]

The muffler, cable and wiring were super helpful, especially wiring. Going from a Kohler tp a Briggs on a lot of Tractors in the past was tricky for me, because of different wiring and colors, this helped simply that. Simplicity is key.

[@bg129]

Great job on the engine swap - I liked the muffler work and the throttle remedy-way to go Taryl

[@tird108]

10/10 commintment yall r loyal to the channel cant get enough keep it rolling boys!!!!!!!!!!!!!!!!!1

[@vernonland5987]

You're a lawnmower genius.

[@cw9790]

I didn't know crap about how to repair small engines but I have so much confidence now because of you Taryl. I appreciate ya friend. Greetings from Fort Walton Beach, Florida.

[@thekingsilverado9004]

I just recently stopped by a big commercial construction job during this freezing rain storm and I asked the electrician if I could have some of the conduit fall offs lying around. He looked at me like I was insane. Let me tell ya the shit works great for exhaust on these mowers. The elbows can get a bit pricy at a supply house but I saved more than one mower with muffler extensions like that. Many years ago I made stack like exhaust pipes for my buddies VW dune buggy like that.

[@jamiedaugherty1]

Shart Tank is one of the funniest things I've seen in a while. Thanks for the laughs!

[@KurtisBarnes]

Always look forward to getting the notifications of new Taryl Uploads!! Never disappoints!

[@ZEROOOOOOOOOOOOOOO00]

One of your best skits yet. Two thumbs up.......and a ripe stinky shart!

[@randybeard6040]

Taryl--You Da Man when it comes to Lawn Mowers....

[@debbieandmarkhoward2644]

Very informative. And you have a good helper in Elkskins.

[@masterofnonetv8361]

That's gonna take half a tube of grease in that spindle housing to get any pressure to actually push it into the bearings LOL!

[@brentsmith5647]

Brilliant video thank you 🤣🤣🤣😀😀😀😀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@bushmaster2936]

Killed me with the Shart Tank !!! Especially the "sharts" in the water ! LMBO : )

[@bluezAngel7]

Hey you

[@98Ram5.2]

I wanna say thank you . I was given a tractor and i came across your channel . And wow you helped me alot to get it up and running . Keep up the great videos

[@lllmmggg]

Years ago I was into rc airplanes, and at a hobby shop bought a pair of Z-BEND PLIERS, YOU TALK ABOUT BEING HANDY ON SMALL ENGINES THOSE ARE! OF COURSE I LIKE THAT LITTLE TOOL YOUR USING TOO,I MIGHT HAVE TO GET ONE OF THOSE TOO!!

[@vinces8974]

That’s beautiful work, great video Taryl

[@stephendfrye3476]

These guys work there asses off to make these awesome videos my hats off them .I can't stand when childish people want to comment and hate on these God fearing hardworking men because they're to stupid and ignorent to make quality video's there self's so please keep your childish comments yourself and let's spread some love for these guys. they are making a difference in the world by teaching the right way to work on your lawn equipment and not just that they throw some really good quality funny scits to make it that much better . I want to thank you guys for the best videos on KZbin and taryl you really do know how to fix all .much love from walker county Alabama keep great video coming I'm always watching

[@hunter7476]

I agree with you all of it taryl is a very gifted person

[@spikeleestree8015]

Taryl n his team are the best! I have been working on tractors for along time and never stop learning. . Also love watching fir the entertainment... keep em comin!

[@MrJonah30]

Only found you channel a week ago have been binge-watching since😂😂😂❤❤❤❤

[@michaelglynn2638]

Thanks guys that was good fun, electrical stuff was interesting, that's always the part I get held up👍

[@mikespain8655]

Goid job. I especially benefited from the electrical part.

[@Iamchriskidwell]

I always thought Slippers played some of the other guys, was surprised to see them all on Shart Tank together, proved me wrong again!

[@Jake-jw3sk]

Slippers does play some of the other guys, but if you notice the presenter in Shart tank was never in the same shot as the judge people. They could have easily filmed the presenter by themselves and then edited in Tarryl, Junior and Slippers judging them. Just saying.

[@Iamchriskidwell]

@@Jake-jw3sk lol I was just kidding

[@jimhenderson2308]

I think slippers plays Ronnie the business man

[@richiethesailor629]

Art of innovation and great sound effects. Informative and hilarious 😆

[@n3bruce]

Great video as always, I run the Regent's big brother, a 2000ish Landlord DLX. In spite of the extra work fixing up the old deck, the cut quality if the full width roller decks makes it worth it. As for horsepower, the 18 horse Vanguard on my 50 inch Landlord can handle it adequately, main problem is it clogs easily in tall grass.

[@TonyButchT]

Mechanic, Engineer and Artist Taryl...Very Fine Job! Great work on video from crew and camera man! Remember Earnst T. Bass?

"Its me , its me , its Ernest T " ... LoL

[@jeffreydevoti7000]

@ And that's on his tombstone too

[@marckgun7371]

thanks to you guys it's saved our planet

[@engineer2001]

Elkskins is always working on those old mowers, breathing new life into them.

[@beekeeper7535]

I like Elkskins he seems like a cool cat.

[@terrycarr7645]

Thanks Taryl, Great and Educational.

[@SuperSherman44]

New Taryl!! This is gonna be good

[@rockharvey5787]

@5:37 is that a motorcycle with a briggs opposed twin engine? Is there a video about that project that I missed?

[@antoniomarc7174]

Nice work Awesome vlog 👍👍👍

[@danielh7503]

He is good (?) with that Tonya Harding bearing installer!!

[@hillbillypeakgarage6797]

You watch vgg

[@firstlast189]

Vise Grip Garage. That guy is funny.

[@adamrifino2]

I think you're funny as hell and you've also taught me a lot about mowers and stuff like that

[@lllmmggg]

I hate to ADMIT THIS,BUT I'M BECOMING ADDICTED TO YOUR VIDEOS TERRELL,I MEAN TARYL!

[@jeffpiatt3879]

Taryl should be writing TV sitcoms. His stuff is better than any of that crap that is out there today.

[@jeffreyyoung8727]

I love shart tank!

[@anthonyseger5039]

You are a hard-working fella and a well equipped garage God bless I mean that with all my heart to you you’re the best like mustie, Has his own channel good luck girl keep it up my brother I kind of all worked on tractors mosey lawnmowers like all Aarons it’s not spell correctly it’s a Tecumseh motor from Wisconsin made his first rototill in 1938 God bless you got talent from God

[@RayBenson45]

Awesome love taryl videos

[@sacsuperboi]

can you explain when we need to swap the alternator/charging system over from the old motor to the new motor?

[@govtekrob467]

Finally a guy that's funny and knows things lol

[@defendthetower2173]

I was having a bad day and watching this video made it better 😀

[@spikeleestree8015]

I did a refurbishment on a simplicity broadmoor. Repowered w a 22 hp briggs v twin. Originally was a vanguard 16hp which couldn't be rebuilt because the customer lost both heads and flywheel after it sat for 5 yrs under a tarp. Repower which required pipe fabrication bent outward a bit n lengthened 1 in on each side. Turned out really good. Pipe is a little tough to weld. Slow wire and lower the voltage. Also new steering bushings and rebuild the deck n spindles. Also flushed and refilled transmission and also new belts and new battery. I had to actually build a bagger for it but it turned out awesome. Parts cost was around 200 bucks. So I payed 100 for it sold it sold it for 780. Guy really loved it. The quality on the higher end simplecitys is good.

[@phillipparker8947]

That's a nice flip Taryl. I do believe you're right on the command it is a better engine. I've swapped a few in my days that had a gazillion hours on them. Nice video my friend

[@bennyogden4524]

I love your channel man just keep going up with the good work man

[@w2dmw]

Taryl, FYI : Tale from me. Needed new volt rectifier/regulator as yours. John Deere wanted $90 ; bought it elsewhere for $45. Now, ebay has then for $9.95. Another good tip, Run a separate ground wire from the connecting bolt of the regulator to the battery neg, or a good known ground. A bad ground connection will burn out the regulator mighty quick......I put mine to the battery post bolt

[@bertgrau3934]

This is very interesting, I'm doing an engine swap on a Murry 40 inch cut. I was going to rebuild the 12.5 engine but, its cheaper to buy a new engine than rebuild. Since I'm going to replace the engine, I figured why not go big, so, I'm going from 12.5 horsepower to a 25 horsepower 2 cylinder B&S. I always felt the 12.5 was too little for the mower, I'm hoping the 25 will have plenty of power for the 40 inch cut

[@jesserousseau2481]

I have this exact engine I'm trying to wire up and need help? What do the brown wires coming off rectifier go?

[@catfishslayer100]

Is that the right filter for it? Saw where the clear/white filter is for the engines with fuel pumps and the red ones was for engines that are gravity fed.

[@kevinstier4953]

Good stuff in these videos super helpful!

[@conspicuousvision4201]

You never "seize" to amaze 😂😂😂

[@gregbetts8057]

i hope you gave the owner a deal , time / effort is money . ive had some quotes that were just less than i could buy a new unit . great vid

[@joshhope9287]

I love this dude!!! reminds me of my uncle..

[@benjaminstockton3917]

Good job Taryl on the engine swap

[@prestonfergus800]

I flipped a few mowers this year. Did well on two of them that I got for free. The one I paid for that was supposed to be a quick fix ended up burning me so I kept it for my own yard.

[@gregbetts8057]

damn , love that lift . great vid

[@angel_dawn_morningstar]

AYP will need to come out w/ a NOS 'Heinz57 Special Edition' of mowers ...including this Grass-Rat inspired Skid-mark Series 🤣😂😏

[@alvineckler6201]

Y'all are awesome 😎😎😎😎😎

[@acetech9237]

Hey Taryl. I bought an old abused LT2000 Craftsman, that someone swapped in an 12.5hp Briggs. Any idea what may have happened in the conversion that would keep draining the battery. Ive replaced the battery several times with several brands. Replaced the regulator as I read is a common cause with no luck. I put an inline kill switch which works just curious of any common mistakes by backyard mechanics that could cause a parasitic draw. Thanks Taryl and I liked Sammy the "Dull" Gravano's initial presentation 😆

[@handyhippie6548]

i had one of those dual control throttle assemblies that the cable hole was worn out on the choke lever. i just moved the cable to the other set of holes on the opposite side of the lever and put it back together. it works perfectly, just opposite of the choke on/off markings on the dash. nice of them to put holes on both sides of the lever like that. it is so convenient it must have been an accident i'm sure.

[@Tbizzh]

When you torch the pulley like that, does it melt the seal under the engine? I know he wasn't concerned with that bucket but what if you wanted to keep the engine in tact?

[@alexstromberg7696]

Yes it does

[@justsaying4195]

Under the deck around the blades is there a way to install more ways to mulch like the Toro dual-core cutting system has to cut grass pickup and leaves when bagging?

[@ohmswats]

hi taryl i have a 2011 craftsman mower i replaced the Barings in the Spindale blade shaft and when in put it back togather and started cutting grass i noticed about a one inch spot of grass that was not cut i measured the blades and they are 23'' long and just two blades , is there any adjustment in the spindles or do i need longer blades i can not go much longer because they will hit the side of the deck and the rideing mower is a 46'' deck thanks if you can help

[@artifactsantlersoh]

Honestly your channel is solid gold lol.

[@victoredington3316]

More uncle andy please. I like da way he talks

[@juandunas2381]

Hi how much will cost a used twin cylinder motor for a cub cadet zero turn 50 inch deck in your area im in Tennessee and here are expensive lol.... I love your videos thanks for all the information

[@alsautner1732]

Taryl you are the best....Love it...!

[@howardwilliams8993]

What does bucket engine mean?

[@qzorn4440]

goober is peanut or nut, says barny... while looking for his green bullet...:) also, what is this engine oil, is that something new???? thanks..👍

[@Oldgeeze01]

Tarly, I watched your episode on the ultrasonic cleaner. I have discovered a great industrial cleaner that has lots of ammonia. I was developed for the coal mining industry. It’s called Blue Wolf. It can be ordered on the interscreen and they have a full line of cleaners and automotive cleaning products. I degreased the Briggs engine on my John Deere GT 235 and it worked great.

[@97Intruder]

Dawn dish soap and water....or Mean Green 50/50 mix.....tried PurplePower, doesn't play well with aluminum......I'm now running a mix of Dawn, and pressure washer cleaner diluted, and seems to work well....

[@randyyoung9892]

Love your Vidjeos ! Can't believe you gonna get $600 for that junk 😂👍

[@marckgun7371]

thanks to you guys showing us idea to fixing things

[@petersallander6913]

I like the way you do things keep it up

[@robertturner6249]

Hey, Taryl when you started the mower at 40:00 in the video after you shut it off you had hold of the steering wheel and it had a lot of play. My JD LT 160 does that. How do I remedy that and make it tighter? BTW I saved so much watching your channel I would pay to subscribe to it. Great video for Sunday viewing.

[@sawyerbennett8227]

He has videos on fixing john deere steering

[@honklerton732]

A bit of the bow chicka bow wow action @ 15:02... that was hawt Taryl.... do it again. You can "goober" me up if you'd like...

[@1996turbocamaro]

Taryl great video !!

[@bentwedgestanleybrand5818]

I love your hoist what a feast of engineering!

[@danielprivate7442]

You're gonna have to re-paint the shop after that episode of Shart Tank.

[@derekobidowski3301]

Since you got the Regent fixed has it sold yet? you can flip it on Ebay or Craigslist. it be the shipping costs for it for out of state buyers.

[@tonywebb4341]

I have a simple city conquest with a 50 inch mower deck and factory is a 18 horsepower Briggs and Stratton I do like the mower it does a wonderful job mowing but it's way under powered what size of engine would you suggest I look for that would give me some more power but not need to find different pulleys and electric clutch thank you for any information o and you have to watch them wet farts sometimes they will itch later lol

[@davidbarrientos4703]

By any chance would you have a part number for a stihl fs75 weedeater flywheel with the key on the flywheel

[@bobdrake7118]

Great video with a lot of meaningful detail. Just one question, wouldn't you need more lubrication in the axle housing? Most of riding lawn mowers run in an oil bath.

[@joleaiperlis5347]

Can you elaborate?? What axlel??

[@joebarry1974]

Fantastic channel. A top mechanic...

[@DAS-Videos]

Fabricating that mufkin was fantastic. It's not easy to do.

[@iancurtis1152]

Hey Taryl, I’ve got Dixon lawn tractor with a 17.5hp Kohler Courage engine. It’s done me well, it’s just gone past 1100 hours on the meter. Not bad for their bucket engine. There’s MY dinner!

[@deansqrow3003]

Got an Ariens tractor that won't start had no spark so I re place coil diodes diodes check good could it be ignition switch it's an Intex Briggs & Stratton 20 horse it has for safety switches plus ignition switch

[@stevennowak7081]

Great Video.....Learned a lot...Thanks

[@onewhosmilesalot]

You R Awesome Taryl!

[@baileyhatfield4273]

I know this is an old video, and this isnt a flip story, but i JUST got an old...like 2003 or so Craftsman with a 13.5 briggs. The deck was shot. It was barn kept its whole life just you know, grass ect. Shot as in there is more holes than metal. Rest of the mower is in absolute amazing shape, i need to give it a little carb clean, but yeah. Old lady owned it, even gave me the original owners manual plus the purchase receipt and even a receipt for a battery. Oh, for free by the way. Hadn't had a ride on before, so this is great, and me and Dad even used it to tow a couple items around the yard a bit. Gotta know for sure when and what to fix or when to give up. If i could get a deck for real cheap, i'd for sure throw one on.

[@ZekeSB]

I remember seeing you use a set-screw to hold a valve guide in place; could you use the center punch divot process you used in this video to hold a valve guide?

[@larrylagoon6405]

LOVE THE ZEP SCREAM LOL