My Cheap Lamborghini Was Hiding Some Weird (And DANGEROUS) Secrets

[@tavarish]

Hey everyone! I wanted to address the "crack" a lot of people have been commenting and emailing me about today. The transmission housing is not cracked. It's just dirt. Thanks for the concern, I'll be sure to tell you what else is broken on this car as I tear it apart more in the coming videos!

[@markiw12280]

Heyy just wanted to say that you should consider to replace the rear axles when the boot has ripped.. seen it a lot of times as a mechanic and the joints will fail basically right away when it lost the grease.. it will knock and shake and just get worse and worse

[@corvette_jake7225]

Let's race for pinks

[@yo67mody1]

Hey.. Since your gonna be changing fuel Lines etc you gonna be going e85?

[@ajmaintasnim8107]

Hey Tavarish why don't u just keep the car dead stock of a while by uninstalling the twin turbo for a little bit and then take ur time studying the turbo and its parts and install the turbo back when u feel it and if it is necessary. *Like that if u agree*

[@danielbeavon6025]

Tavarish yo thx for the loved comment and thx for highliting it we need more....PEOPLE LIKE U ♥️♥️❤️❤️ IN THIS WORLD

[@cristianpuhlovsky3115]

Always been a fan of your content, but this Lamborghini has me more exited than any of your previous builds. Keep up the great videos!

[@sieve5]

I agree this build really caught my attention. This will give other people the confidence to do gallardo builds in the future. For $60,000 or whatever he paid he could have bought something new that was fast and probably more reliable. But the twin turbo kit on this car REALLY makes a difference in value. I hope it's not too expensive to get it operational.

[@Swordie100]

64.000 Dollars. He hopes/thinks it's only a clutch issue. (To get it atleast driving) xD

[@mporcelli77]

Back end burned up in a fire, needs $120,000 of repairs. Tavarish: Hold my beer

[@johngerraughty]

That would make the beer yet another thing that is unfinished.

[@JakeGreen]

The channel is really blowing up because of this project. Good work man, even if the car doesn't turn out perfectly, I believe this is a good investment for you bro. Don't get me wrong, I have faith in you!! All the best

[@tuguidaniel2960]

Yeah in like 2 days he got like 50k subscribers and this video 380k views in 1 day

[@wpgspecb]

but why ??

[@CATPLAYING]

Man this rebuild is so fun to watch. I'm really excited to see this on the road :)

[@WangChung81]

Dude. Dude... You are up to your neck in a metric assload of MAJOR mechanical and electrical issues, and you're worrying about powder coating the wheels? FOCUS MAN, FOCUS!

[@minde66o85]

WangChung81 indeed. should have kept tires. Fixed everything else and trashed tires then. Hes doing it backwards

[@BA-ue8lh]

WangChung81 yeah. He’s severely lacking in focus. Oh well, he can gab your ears off...

[@odethious5639]

It's multitasking, he just sent the rims to powdercoat while he works on the rest of the car. Besides, it probably got people's attention, and that's good, considering he doesn't have the biggest channel.

[@Jester123ish]

Psychologically it gives you a big boost to do something easy so you make some progress and cross some stuff off the list.

[@Louis93]

👌🏻👍🏻

[@danielwiggins4960]

I’m really enjoying this series. Thanks for not using foul language. I can watch my kids in the room. You seem like a nice, smart guy.

[@TheLuftpolsterfolie]

Poop

[@ReyDodo]

Your gay for not saying, “ No homo” you gay bruh

[@TheFlame319]

Fuck

[@heavyevo]

Subscribed. This is a serious project, yourba better man than most.

[@yoppyirwan9247]

supras400 until u see him bought new car before this project finished

[@godnotsomighty]

I'm truly amazed and deeply impressed at your can-do attitude... Nothing seems to phase you... You must be a great guy to call a friend.... Can't wait to see how this project evolves... Best of luck...

[@patemery4449]

Love the videos man. You always make me feel like we're a part of the rebuild process. Keep up the good work!

[@minnesotadynasty9974]

Clicked this right away, I'm excited to see more of these vids on the lambo

[@donkykong1154]

Me too :D

[@Laimix]

Same here. Even though Lambo seems like a basket case I believe that Tavarish will do it. Its like watching B is for Build (Tavarish edition).

[@bodhim4353]

As same as same can be

[@pallavipawar7343]

Me too

[@derkeksinator17]

Yeah, don't buy another car...this will require all of your attention and money.

[@PSAmanrules100]

Just take it to Los Santos Customs

[@Sir_Leelord]

hahaha, they will finish all the work in 5 seconds

[@user-ur9qq8us4y]

187 dollar to repair it

[@VyprMoto]

tim just gonna say that lol

[@victormejia4513]

AB Productions ur an OG bro

[@someonehackme7981]

Yeah just pay Los Santos C more money than the cars worth great idea

[@tommyjay4770]

Why are you painting the wheels now? Seems like you should get it to a point where its mechanically sound before investing in appearances.

[@michaelmontefusco896]

Tom Juliano doesn't seem like him getting the wheels powder coated if affecting his progress on the mechanical aspect of the car. So I ask -- what is the problem?

[@thenullco]

If he has the money for it then so what?

[@ryanschaff123]

well why don’t you buy a Lamborghini project and then you can have your wheels sitting in your garage taking up space and then once the car is fixed and ready you can take your wheels to get powder coated and wait 2 weeks while your Lamborghini is ready to go sitting on jack stands in the meantime. Fucking idiot.

[@98jf5]

He might as well get some of the cosmetics done while the car doesn’t work, that way he doesn’t have to wait for the wheels to be done whilst the car is driveable so he can drive it more

[@Bucko99]

2fastHarley I guarantee there’s been a time where you failed to think ahead. So does that make you a “fucking idiot” as well? Get your god complex in check.

[@PBPeachy]

Wait until that jack tells all his other jack buddies at harbor freight he was used to jack up a lambo. He will be the sharpest tool in the shed.

[@Jeekinz]

Car doesnt run....but lets get the wheels done!

[@jessegutierrez9689]

Jeekinz well why not get the wheels powder coated while he fixes the car so once he finishes it (if he ever does) the wheels are already done he doesn’t have to wait on them

[@Jeekinz]

Jesse Gutierrez Wheels can always be done, take care of the unknown issues first, and there are many!

[@golders99]

Yeah, it's going to be a long time before that car runs. Some guys have just found out its previous life, auctioned for $45,000 on Copart.

[@rickyspanish9152]

Jeekinz fact

[@golders99]

Fingers crossed it goes well for Tavarish. He is a legend!

[@t545o]

Just contact the previous owner! Instagram: frankiefred. Looks like a nice guy and may be able to help you withe the car history! It entered the goldrush rally 2015, and says that the lambo made 1600hp back then. Search his IG! Good luck again

[@Stylemaster911]

Good shout, just looked and it was indeed his

[@logannewcome]

He took terrible care of his car

[@sergej841]

Logan Newcome that is why car was only 64k

[@diogosalvado7889]

Tuga

[@biggz1009]

t545o like to get this to the top comment so tavarish can see

[@Imvelo31]

Love the channel! You are very transparent and elaborate really good! Feel like I’m involved in the repairs!!

[@lakai958]

This project is giving me massive anxiety. Bless your soul for taking this on

[@someonehackme7981]

You probably get anxiety riding the escalator

[@mtvernon4512]

My favorite KZbin channel now

[@kryptoniteee]

Thanks, we all wanted to know this.

[@2brothersracingllc756]

Don't buy another car until this is finished ✔

[@axhollema]

And don't forget the Supra too haha

[@wolbi01]

I don’t think I’ve seen a project that he’s completed and I wonder if he learned anything from B IS FOR BUILD since chris finishes his cars before moving on to another car.

[@gustavopolanco6925]

He'll be dead by them.

[@2brothersracingllc756]

Gustavo Polanco I'm sure there are some used lambo parts he can buy and get it right again, people have connections. Plus I'm sure there is a shop or individual who is knowledgeable enough to help him complete it

[@mrpatton01]

i think the turbokit was done like that to make it look OEM on the outside. with the bumper on. it is far from the best way, but it will still make plenty of power

[@moes5013]

This dude needs more subscribers, he is very transparent & dares to do work most other car you-tubers wouldn’t consider. Def a good quality channel. Good luck on the lambo, I’m sure your viewers can’t wait to see this project finished

[@amadafaka]

Moe S I am waiting for him to dare start the manual transmission swap on his Mercedes.

[@MJ_868]

Tavarish finishing a project? Good one

[@pezinaris]

How about getting the engine to run before going into the color of the wheels mate..?

[@98jf5]

pezinaris it makes perfect sense to get the wheels done whilst the car isn’t working, he’s not going to be using them whilst it’s sat in his garage is he?

[@ALDA2479]

pezinaris now is actually the perfect time to get the wheels done he needs them off to chase problems and wrench so getting them done now is killing 2 birds 1 stone there off out the way and getting finished

[@sed8181]

the only reason you would want to wait is if you were not sure you could fix the car or you don't have the money.

[@pezinaris]

C.HAYES Mate the engine isnt running, cars paint is peeling off on one side, there are multiple paintwork problems and the bumper is cracked and the first thing he does is fixing something that’s not broken

[@hashbrownsforhamster]

Actually the engine is running, folks. If you watched any of the videos you'll see that it starts right up. The problem is either with the transmission or the clutch that prevents the car from going into gear. Also, fix the wheels while it's not driving so that once it's rolling you're ready to go. Makes sense to me.

[@Kilnor]

I work for a company that makes carbon fiber. Let me know if I can help you replace those damaged carbon fiber parts.

[@dougparker9718]

The Kilnor what are the difference price wise between carbon fiber like prepreg vs carbon fiber reinforced plastic?

[@Kilnor]

Doug Parker great question. I'll get that answer for you on Monday. I'm just the machinist there, so I'm not the specialist when it comes to carbon fiber.

[@dougparker9718]

Thank you.like yourself I'm interested in cars and I know exotics like Lamborghini and Pagani use carbon fiber for many parts including the chassis.i appreciate your help and time man

[@desertkil]

Maybe you could mail him

[@Kilnor]

Doug Parker ok sorry for the late response. The price is about the same. The process is just different to get the end result. If you'd like to contact the company let me know and I'll get you in touch with the sales reps.

[@ReconVette19D]

Idc how many problems this car has, this guy is so much more genuine than these trustfund babys who cant even tighten their own lugnuts!

[@LEF-xi9rw]

Alex D i see what you did here!😏

[@JZH10000]

It's like if those low budget boosted Honda odyssey hoon channels got a lambo it's fantastic

[@karriebhurgari3933]

*cough* *cough* tanner fox *cough* *cough*

[@ChillRainyDrives]

This is the greatest car series on youtube 👌

[@MrDejast]

WOW, I've never seen a 64k hoopdy before

[@MrDejast]

bogeytu hooptie

[@ljn1477]

Actually its hooptie. Trust me. Im black

[@MrDejast]

@@ljn1477 actually it's a p.o.s.

[@linisssss]

I think you should remove all the dodgy turbo parts and restore it to stock and make it run and then later maybe do the turbo build from the ground up. Can't wait for the next video!

[@emerilnut]

^^^ This.

[@julianarnouk56]

Check driveshaft bolts, seems like they are different sizes to me. 19:24

[@sw96]

Yeah I noticed that too, personally I wouldn't feel comfortable driving that thing until I'd gone over ever single part of the car, it definitely has the look of something thrown together in a hurry by someone who couldn't give a shit about the end product. I'd guess that it's more due to a hurried rebuild after the fire more than the initial modifications.

[@1950harleycharley]

Hi Tavarish....I am an old guy who has worked on cheap American cars....This car, even though it is burned and grubby, it LOOKS expensive...You got a smoking deal for $64,000 too!! You are very knowledgeable...I wouldn't call you a shade-tree mechanic by any means!! Love the videos...I look forward to more of them!

[@zlounberg6958]

That intake setup is ridiculous, no wonder it caught on fire

[@a456987]

All those zip ties would make Roadkill proud 😂

[@rcryan7shmee]

a456987 that makes no sense

[@haydenplummer4415]

Ryan Coffman You obviously have no clue who roadkill is then

[@canehdiansteve3455]

It makes perfect sense, you just need to know what's being talked about.

[@TKOIII]

“If we take all of this apart and start from scratch, we should be good.” Famous last words

[@TKOIII]

Yes

[@ryanschaff123]

Actually you are wrong about the powder coating process, it’s the exact opposite. The wheel it’s self is grounded making it a negative, the powder is the only thing charged and that’s with a positive current. So you have positive powder and negative wheel. Positive sticks to negative and that’s how the powder is sprayed and it stays on the wheel for it to go into the oven. Also after the old Paint is chemically removed the wheels are media blasted to give a rough profile that the powder can to adhere too, otherwise one small chip and it will all start flaming off-I have been powder coating for 15 years and own my own custom powder coating shop.

[@kryptoniteee]

2fastHarley I think that’s why he took it to a shop to get it done...he was only trying to give an idea what happens. I’m sure he read your message and was standing, therefore ‘stand corrected’

[@streetrockconcepts]

ditch the turbo in the meanwhile and put it again when everything under the hood is all functioning well and restored. just my two cents.

[@richardswain9143]

StreetRock Concepts Agree. Get it back to stock.

[@kryptoniteee]

Richard Swain that was my thought but I guess he just wants to get it all done without taking it apart again. To be honest he never finishes a project, I think he’ll give up once he realises the clutch and transmission need to be replaced.

[@marklashko6674]

Agree with you on this.

[@whytho3633]

Richard Swain stock is slow as fuck. Why would you want that. Its going to get alot of attention. So if someone wants to race this thing will get fuckin dusted

[@kryptoniteee]

Why Tho I wouldn’t say it’s slow as fuck. It’s still faster than 98% of cars on the road. So calm yourself fella.

[@samadrid6321]

I just stumbled upon your channel, and I am going to watch the whole Lambo rebuild playlist. This is extremely interesting. You are a brave and enthusiastic character to take on this serious challenge.

[@echtogammut]

That is the jankiest turbo install I have ever seen, not to mention all the other mods. This looks like an exciting rebuild to watch. I would take this video to one of the major tuner shops and film their reactions... it should be hilarious and maybe even helpful for you.

[@bhcshifu]

I liked the red, looks like a rolling velvet cake haha. Sub'd cause I want to see how this turns out

[@spike4850]

Marc Phillips same here - really keen to see how this build goes.

[@jeremybuenaseda]

Marc Phillips subbed*

[@BillMrazek]

Keep the center caps red!

[@highjix]

mmmm.... cake....

[@flatlineryan]

Marc Phillips me too

[@slackjaw703]

Just found your channel, and had to sub to see where this whole thing goes. Lamborghini are expensive when they are in perfect shape, but extremely expensive when they’re not, so it’ll be interesting to see if an average guy (monetarily wise) can bring this bad boy back to life without having to sell his soul to do it. Best of luck my friend! I’m really hoping you can do it on the relatively cheap!

[@reneneron2971]

Taking a car apart is almost always easy . As the previous "owner" showed, putting it together properly is a whole different story. Unless you have access to the factory service manuals, this is a train wreck of a car..even with the manuals it is going to be extremely difficult to diagnose. You need to assume almost everything was routed or done improperly. And, on the turbo set up, it is a mess, but there also is no "scavenging" downstream of a turbocharger...you simply want to minimize back pressures downstream of the turbo (or in this case, turbos).

[@someonehackme7981]

Never trust a guy named Rene

[@takethecatout]

Rene Neron I

[@jumpscarestudios1890]

And someone finally speaks the truth.

[@peruzspacca]

19:36 you should check that part,it looks like it has a pretty big crack

[@reconmotorsports]

transfer case output shaft housing. Totally looks like a crack; which could also be why the car wont go into gear. That transaxle isn't going to be cheap to replace

[@joelmoreno8010]

Yeah I was about to comments that. Also looks like he tried to avoid showing it 🤔

[@peruzspacca]

it may be nothing,but it's always good to be extra careful with such high performance cars

[@mrjm6752]

Look like dirt that dry off. Not a crack

[@khaldrogo9451]

Not a crack it’s dirt

[@philmarkle1110]

I really appreciate the fact you're not scared to work on this thing. Most owners are scared to even tighten a bolt on something like this.

[@apassionfortangling3671]

You are right about the cold intake. The rust is normal, the turbos can glow red hot when on song for a period of time and that will burn off anything you coat them with ;-)

[@wordlife_97]

To be honest I think you should have changed the rims as the last priority! I wanna see this baby fixed and running!

[@justanothernoobe]

mate I love the way you don't let a project of this size or complexity phase you. You just keep working through it. Knocking off one challenge at a time. And I love that you realise that to get over the challenges, you have to know what you're facing - and that's brave. I'm no rocket scientist either but your logic makes sense to me. Keep up the work. Subscribed :)

[@C0Y0TE5]

FIVE years later and still not done. He keeps buying more projects....

[@chrisangouras3824]

HOW AM I MORE STRESSED THAN HIM???

[@casbeernink6975]

Chris Angouras i

[@yukimasaheppe]

Same😂😂

[@brettstevens4989]

I get so stressed I don't even want to watch. But I can't stop.

[@hectorjr6923]

Chris Angouras seriously... haha!

[@aliabdallah102]

Because you're probably more broke than him.

[@nocoolname32]

unless you are in the business of youtube, this is 100% a parts car. but he's the perfect buyer as this train wreck of a car will make him money, ONLY because of youtube.

[@mattw4211]

nocoolname32 it's the only reason I'm here lol. Proof that it's working I guess

[@dandundid540]

nocoolname32 hint hint, get on it buddy

[@HFV_Junkyardin]

Yup. It’s a lost cause. But we all want him to succeed. Plus it’s entertaining to see just how bad it is.

[@christenn32]

He's gonna be a hero or a goat. Either way, we are all gonna watch how it unfolds. I hope he pulls it off!

[@Jester123ish]

Have to disagree, the car is in great condition, it just needs a lot of work putting things back how they ought to be, the upside of having all this outstanding work is you get to own a Lambo for (relatively) cheap!

[@Mattieman1337]

Seen a few of your vids before and enjoyed them but this is on another level. Subbed when you unveiled the Lambo in the first vid and have been eagerly awaiting every update. Keep em coming, can’t wait to see this come together.

[@xcod88]

19:22 you need to change the driveshaft bolts because you have one longer than the others and at high speeds it will unbalance your driveshaft!

[@someonehackme7981]

No it won't

[@Jeekinz]

Yeah, that's one of the major problems with this heap.

[@someonehackme7981]

The bolts are fine he's wrong

[@jeebusafication]

I'm so pumped to see what happens with this Lambo!!

[@bradyfilm]

You are not wrong, move those induction tubes and filters, wouldn't be too concerned about scavenging just make the exhaust exits as free flowing as possible. If you can move that heat exchanger into the airstream it would be a good idea if not add a fan to it. Another idea might be a spray bar for the intercooler but moved into or ducted too airflow is important , Remember for every degree c you drop intake temp you add 1% more power , a 10 % increase is only 10 degrees away.

[@kylesautter8555]

Ok so I have been checking to see new videos every hour lol . Your lambo is so sick and it's at the bottom of the barrel . Can't wait to see the end one day !!!

[@paansukarjo90]

dude.. the carbon fiber part is still looks saveable to me. just sand it first and top gel coat it. then see if it still looks presentable. if not, you can still paint it. that way you can save a lot of money to buy more important parts since this build looks very costly.

[@Jester123ish]

Totally agree, perhaps take the parts to specialists and see what they can do.

[@spike4850]

Mohammad Farhan Sukarjo wtf why do you put two spaces between each word you type?

[@thenewalexintorrevieja]

Dude ive been watching you vides the whole friking night now!!! Really like them!!! Saw the whole supro turbo build and all the videos from the lambo!!! Keep on going you just got a few new follower!

[@antoinepageau8336]

At 21:23 you'll see what appears to be a crack, is this just surface finish or...

[@zerofunAZ]

I paused and replayed at .25 speed exactly at this point, I'm glad someone else noticed. Upvote for Tav's awareness...

[@sal5440]

I noticed it immediately as well.

[@mattsmith819]

Your spot on

[@grant7909]

not a crack, i have them all over my ole bmw

[@aaronf4201]

I saw the same thing...surprised he flew past it.

[@nonamus9947]

My phone decided to turn off while watching this, so now I’m watching it after school in the computer lab

[@colton9149]

Nonamus Gaming High school or College?

[@nonamus9947]

Now I bet Tavarish loves me since he keeps on loving my comments

[@Hungry_Hunter]

I love your optimistic attitude and willingness to tackle something others are too scared to contemplate. I wish you luck but all I see is trouble and pain.

[@ls133]

For the turbo I think you’re right !

[@thestigseuropeancousin7941]

Taking a dump normaly takes like 10 minutes... *sees a new upload, sits 26 mins on the toilet* 😅😁😁😁

[@OMGWTFLOLSMH]

Try more fibre in your diet.

[@John仰望十架的栋栋]

Tavarish is very optimistic and may God help him through this tough work.

[@johnblackwell7234]

You have my attention.

[@jacopoi7047]

Good luck, I honestly believe going back to stock would be the best option for this thing

[@olmaki]

Hey Tavarish! Your video came up on my feed and I started watching your cheap Gallardo adventure. I first thought you would be one of those dime a dozen youtube luxury car channels that have nothing interesting to say and are somewhat obnoxious. I was pleasantly surprised that you seem like a really genuine and well spoken nice guy. A lot of youtubers have trouble keeping up a coherent dialogue without tons of cuts but your output is stellar. Kudos for that. Ok this is getting a bit into bromance territory but really looking forward to more videos with this lambo. Hope you can get it running soon. Cheers from Finland!

[@BlakeMcBride]

I don't wanna look flashy... in my twin turbo Lambo. LOL. Love the project.

[@loganwilliams5976]

Lol you should get this car drivable before you go replacing the rims because you don't like the color

[@ltd4726]

It's an easy job, it takes some time to get them powder coated and it is a fast job to do, so it is better for saving time i guess.

[@yamumsabadger]

Migh aswell send the wheels off for powder coating while he works on the trans and all the other broken things on the car itself. Stuff takes time and hes doing it logically.

[@zane4964]

Why not multi task

[@fox10169]

Wheels

[@glenns5140]

The wheel colour is loud? Come on dude you're driving a lambo

[@jordirosset613]

That rims look awesome I loved the color! So sad

[@henrycollins2478]

The color is beautiful on the car

[@trishhatesyou]

All of the screws are probably in the glove box.

[@SuperMadBoyHD]

If u seen the previous video he couldn’t open it and the handle broke for it 😂

[@sean8051]

"It's like an expensive Jetta" 😂😂😂🤣🤣

[@jdmercard]

You had some great videos before but this is next level. You'll get to 500k subs this year because of this project. Solid move brotha!

[@carlosvaldez3620]

I’m not skipping adds you need the money

[@joesdiy4260]

I really think you should remove the turbo system, rebuild it as stock and enjoy it. You have a lot of variables with this setup, you should try to set it back to stock and make sure it runs right. Then after you think its slow, you have a turbo system hanging in the closet.

[@MVSTNGGT]

Joseph Cholag Or instead of wasting all that time, just get the damn thing dyno tuned properly, and keep the boost all the way down. It would be the perfect daily, with the option to turn it up to 1000+ HP.

[@joesdiy4260]

Sure. I just hate dealing with other people's rats nests. I would rather hit the reset button and start fresh. Also, it's not as easy as you say, there is a lot more work involved than just a tune.

[@MVSTNGGT]

Joseph Cholag converting it back to stock would be even more work, and it has problems revving to over 3500RPM, anyone with mechanical knowledge would start looking for easy problems and eliminating them first, it could be as simple as a bad coil pack, no matter what he does this is going to be a time/money pit.

[@recodeofficial4820]

loving this Lambo Vlog very interesting keep it up bro !!!!

[@Blasterxp]

Let's take it all apart, and.... Sell it for parts!!!!!!

[@hockeynpolo1]

Instead of ordering Lamborghini specific parts (I'm assuming you won't since it's out of warranty) can you order Audi or VW components to save a few bucks? Or are there enough aftermarket parts to replace what's broken?

[@MrCams2011]

21:25 is that a small crack I seen in transmission?

[@daaz2005]

caught that too

[@SilentF30]

cam2k yeah

[@mproyyc2001]

6:20 " I don't want to be flashy" Buys a Lambo...

[@gabriellord7556]

Marcus Pro That's not the point

[@nightkiddl996]

+Gabriel Lord you right

[@shaunhuckabee5904]

Marcus Pro I know right? What an oxymoron LOL!

[@Femo-ok]

Rip that turbo kit out and rebuild it. Those guys sure butchered this car.

[@rigobertof34]

Petition to keep the wheels red ! Like it up ! Also, he should take it to Tx2k once it’s up and running, would make for some great footage

[@17mrchris]

i enjoy the lamborghini videos thank you

[@jda8176]

You know how Chevy has the bowtie? Well your logo for that can be a zip tie!

[@MrJgem12345]

For the carbon fiber, sand it down with a block and cover it with a new layer of carbon fiber and some epoxy. Finish with a varnish or some kind of UV-blocking lacquer (epoxy yellows/breaks down in UV). Search for "carbon fiber wrap" on youtube and you'll find plenty of tutorials! Best of luck @Tavarish!

[@joes.7536]

In a turbocharged car that is Intercooled it is not as important to suck cold like a NA motor. I mean anything helps but you got to think the air is going to go through the turbo and get heated by the heat from the turbocharger and the heat created from compressing it. And you're really relying on the efficiency of the intercooler to cool it as much as possible to prevent detonation and the ECU pulling timing.

[@nick.100]

I trust u since your picture is of a turbo

[@dirtmcgirt0420]

You saved me the time of writing this. Cold air kits on a turbo is just a joke. It's after the turbo the air gets stupid hot.

[@cabelovlie784]

The “shop” (using the term very loosely) that installed that kit should be banned from touching a 96 Camry... Let alone a Lamborghini

Cabe Lovlie Agreed but I don't think they should even be allowed to work on a kid's skateboard!

[@squidwardshouse67]

Oooo correct usage of let alone, you don't see that everyday.

[@apocreg11]

Life of palos led me to the channel. Wow this Gallardo build is looking so cool, taking it from this state. Enjoying watching it as it’s all new to me

[@nv1493]

Glad you're saving this car. I can't imagine anybody doing that level of crap work on any car.

[@ΚωνσταντίνοςΚαπίας]

I love this series with Lamborghini this is reason for my subscribe

[@johnd3140]

Wow, I remember watching this car being built on instagram at Powerhaus. They tuned my g8 but once they started getting away from LS cars and trying to do the exotic thing, the shop went to shit.

[@chrislukasik7393]

Loving the videos with this lambo man. Love your optimism and positive attitude to get this car working. Way beyond my technical skill and I would be scared to have this car in my garage haha. Good luck bro. Looking forward to more videos :)

[@pedropais5568]

Tavarish please dont buy another car and finish this one!!!

[@animalworld5534]

Love the channel fam.. inspired me to do my one build 2011 jag xj..in negotiations with the dealer as we speak.. good luck with the Lambo.. peace

[@birtiesalt3669]

Its been 2 years now how did the xj build go?

[@ahmedben-hassine9438]

Way to go you gained like 50k subs in a weeks time @tavarish

[@averyfilbert1596]

Was built by a place called Powerhaus Performance in new jersey

[@visions2963]

oh well, how do you know ?

[@_wuthappnd2yt]

Yeah how do you know this?

[@CenCt5Driver]

You can see tons of images here and dyno video: www.socimage.com/user/regent_performance/295092476/997414113324217675_295092476

[@Kearonsherwin]

Jeff Baxter to me that looks before the car was on fire. If you look, parts are different like the tips for one and in a previous comment by someone they showed the car after the fire and the engine and everything from the rear was ripped out

[@DavidWilliams-bg5yk]

I'm really excited about this rebuild! Good luck Tav!

[@jvsxn0]

I personally love the colour ❤️

[@QB89Dragon]

Always cute to hear a Floridian complain about corrosion

[@Funky_sockz]

QB89Dragon the car is from NJ

[@thelonelycaterpie3207]

I mean welcome to north florida tho it snows here

[@golders99]

Tavarish, Please take the Lamborghini to a Lamborghini Specialist before you sink any money into it. It seems from the other posts the guy you bought it off got it for $45k from CoPart, got it running to then flog it on for $65k. Judging by the CoPart pictures that might not even be the original engine etc. Please get it checked before you waste any money on it. All the best, Rob

[@dozer1642]

The Open Road the original engine burned up. It’s not the original engine.

[@joeladzim1225]

lol he fucked so hard

[@golders99]

Judging by his next video Tavarish has it all in hand. He had a guy to check it out before he bought it. Fingers crossed it all goes well. Tavarish is a legend!

[@gigel99324]

The Open Road do you think cars run on magic?

[@dozer1642]

The Open Road the vehicle is capable of running on engines other than the original. All is not lost my millennial pessimistic child.

[@Chris-cy3uq]

Great video as always man! Your channel is gonna blow up with this project :)

[@smokeyreddot]

Got my sub bro all these people talking bad about this build saying you should've got another car forgot that they started watching because it was a Lamborghini. I look forward to all the coming videos on this.

[@0000excalibur]

Let's hope the engine build quality is not same with the lines on/under the engine and turbo kit. Good luck with new car..

[@ShayNashiv]

Your a dude who knows what he's talking about! Great bro, good job