How to Manual Swap ANY CAR! (Complete Guide)

[@torang_]

If you watch this video in reverse you can swap an manual to a automatic!

[@pussysmasher525]

I'm completely mind fucked

[@Aglai76]

True but why would anyone in their right mind do that?

[@terranovnicek1567]

Shit you're right

[@cyberneticamoeba1908]

Anthony Trifoglio because kids these days can’t drive stick smh

[@muhdfirdaus3807]

@@Aglai76 I know someone who did conversion from manual to auto

[@RafaelFerraz4979]

Thanks, just manual swapped my tesla.

[@zachattack2016]

i seen people on bbc manual swap and electric swap an older car XD

[@jaredgarbo3679]

Not gonna lie I actually want to replace Tesla battery and motor with an engine

[@jaydenhalsall8508]

Jared Garbo than put the tesla stuff in another car

[@jaredgarbo3679]

@@jaydenhalsall8508 200IQ

[@MeatMonger_]

*shifts from first gear to first gear* Tesla:*vvvvvvvvvvvvvvvvvvvvvv*

[@udubdave]

"Manual swapping is easy" says the guy with 10 years automotive experience and a lift in his garage lol. Maybe I'll get a cheap automatic and take on this project one day.

[@anunentitledmotivatedmille7731]

Anything is possible I would have done it on the ground and cut the exhaust in a spot easy too weld.

[@TreeHugger27]

Is300

[@Rumpl4Skyn]

OscarKilo RomeoEchoTangoAlphaRomeoDelta

[@AZEOforreal]

I'm getting a 240sx automatic and doing thia

[@KinaGee]

@@AZEOforreal I just got me a toyota starlet GLANZA and about to get a manual transmission from another starlet thats f&$^%@ lol

[@Iain240]

Instructions unclear, I ended up with paddle shift.

[@ClassCraZeTV]

LMAOOO😂😂

[@thunderbirdizations]

Your clutch pedal on your steering wheel?

[@tagallstar1801]

Omg this comment is Golden😂😂😂😂💯😭

[@yonseth788]

😂😂😂😂😂😂😂😂😂💀💀💀

[@israelhernandez8193]

Iain Volvo brother?

[@danieltracy9801]

This is awesome taking the mystery out of manual swapping. Manual swapped my v6 05 accord with an Acura tl 6 speed powertrain. It wasn't too hard at All many people online told me not to do it at all because it was "to hard" or "to expensive" I bought the whole parts car for $900 driven it for the last 3 years never an issue looks factory to.

[@BenjiluvsHondas]

do you think that would fit into a 03 accord sedan 4cyl?

[@ttvturtleman2861]

I'm thinking about doing this with my v6 03 accord do you think it'd still work? And if so do you have any parts you add to the listed in the video?

[@dogbounty6399]

I was confused so I did a line of coke and ordered a Hooker. Turns out out she was a part time mechanic and drifter. Ben might know her .lol

[@danielgarcia-dt7fy]

Lol I also did a line of coke but was not confused 😂

[@patmartin7072]

Olordy lordy no three hookers ten lines coke one to do car one to do cooking and one to do housework cheers

[@ryanz7183]

Speaking of lines of coke my brother walked in a school bathroom one day and there was a kid snorting coke of the back of a urinal

[@benyounge9672]

How much money you reckon it costs to Manuel swap?

[@xRSAkingx]

Next video, "How to replace your shop fan!" 🤣

[@colormesarge]

I thought it sounded like a shit clothes washer

[@100mileseverythingLLC]

Lmfao bruhh

[@trippyleaf4853]

What you mean.. that one ceiling fan was working great. If u dont believe me listen to that baby go!!

[@CalebTomaschefsky-Youtube]

Was thinkin the same thing. Stopped watching just because of the squeaking.

[@speedy-cc]

I have done this twice 👍 hardest part is getting all the parts, lifting the trans and some wiring. The plugs tend to be diffrent on the harness

[@benyounge9672]

How much money you reckon it costs to Manuel swap?

[@alexoliver2399]

@@benyounge9672 Depends On the car to be honest. My old 350z cost around $1,800, whereas the MR2 I'm planning on swapping is probably going to cost between $1,400 - $1,600

[@Cody.Wright]

If I was there that fan would be in a million pieces right now

[@sokamw6568]

🤣🤣🤣

[@mmodtomic7119]

...And hey kids, don't let your new manual trans hang on the clutch disc before puting in your trans bolts. Another lesson learned the hard way. You'll end up bending the clutch disc and have a very chattery clutch engagement.

[@alexgorski5031]

I want to take the wimpomatic out of my 2016 Sierra HD and put in a six speed stick. Ideas? Suggestions?

[@mattxmoto8257]

Alex Gorski there are so many computers and sensors in those trucks, have fun with that😂😂 your dash is going to be lit up like a Christmas tree

[@stephenfrancis182]

@@alexgorski5031 you need to rip out the trans, engine, all the wiring. make the engine run with as little wires as possible or find a new engine. too many compfuckulators in new machines

[@02jeepwj]

Stephen Francis Holley dominator

[@tony_5156]

Thank you for the info mate

[@caidenmccaughan6737]

Taylor: Today I'm going to swap a automatic transmission to a manual transmission Scotty Kilmer: I'm about to end this man's whole career

[@codyw.2428]

🤣😂🤣 😂

[@jnutz4871]

Id imagine he was angry about it not being a 94 celica

[@z-trip5457]

Scotty is peak boomer.

[@All_About_the_Benjamins]

Scotty Kilmer actually prefers manuals over automatics.

[@leeham6230]

@@All_About_the_Benjamins Scotty has a video entitled "Why not to swap your car's transmission."

[@tyler.2487]

so ah, this couldnt have come at a better time mate Buying an x91 mkII in a few weeks and its gonna need a mansmission swap Thanks a million Taylor!!!

[@logankouwenberg3399]

Whoever disliked forgot their torque converter bolts

[@d.westphal13]

I did this, but ended up throwing away the entire motor and transmission because it was junk, lol. Replaced with a new motor and manual trans

[@imbojohnson5]

no, they dislike the squeaky fan lol

[@darthsailormoon4831]

Smarter people are disliking it because it is very dangerously not informative! A lot of newer cars require a lot more work involved mainly to do with electrical. Some cars like my ford fiesta require a manual wiring harness, there are tricks into using your current automatic harness for the manual ecu but research carefully, and know what you are doing. Have an extra car available because some swaps have taken people weeks!

[@atf01234]

Hey guys! Taylor Fix here! and today I will be showing you how to swap an automatic transmission to a manual transmission.

[@thunderbirdizations]

Golden 😂

[@TheBlade616]

It's inexpensive, and using common hand tools so you can do this in your own driveway

[@evangelpaselio8473]

I can honestly here that in his voice😂😂

[@gabrielunderhill]

Out with the old, and in with the new!

[@rubenrios8607]

atf01 Does it require soappy water and medium strenght tread locker?

[@miatakhalifa]

Dude the narration over the time lapse is so fn legit! You're vids and editing skills are just getting better and better! And more and more like a show on velocity! Seriously bro I'm so impressed!!!

[@kolinmartz]

Can’t wait to do this with my Prius

[@TheMr0450]

simply the best manual swap vid on youtube. well done guys.. wish u threw more light on the clutch linkage parts & how u put the clutch pedal in .. cheers!

[@easytalker864]

Agreed

[@Floppfb]

I found a super clean automatic Miata with 80k I’m about to pick up for CHEAP. Planning on manual swapping it and flipping it to fund another build. No rust and sick yellow paint

[@dylanmonnier3559]

I have a yellow automatic with 80k lmao. Thinking about doing a trans swap

[@benyounge9672]

How much money you reckon it costs to Manuel swap?

[@nickreed5007]

Bought my automatic ‘13 FRS with 37000 miles on it for $13000, I always wanted a manual but couldn’t pass up that deal. Always thought this would be way harder to do. Thinking of doing a manual swap in the near future thanks to this vid man!

[@benyounge9672]

How much money you reckon it costs to Manuel swap?

[@maxwilding]

The first time I did a clutch on a friends polo we forgot to to tighten the driveshaft bolts. We went to McDonald’s in a break a college on the way back the drive shaft broke free and too a chunk out of the gearbox, luckily didn’t leak but we had to push it to a nearby car park. I appreciated the note about tightening driveshaft bolts lol

[@JimmyPop71]

When you swapped the ECU’s did you have to do any reprogramming stuff? Or it was plug n play

[@chronicbeans9689]

I guess we'll never know

[@joshuasweeney1159]

You probably need to do something with the ECU but I believe there are specialists for that. Or just buy an aftermarket one.

[@callister4941]

if you swap a cars ecu for the manual version it will be plug and play

[@AbgarMusayelyan]

plug and play for older cars. new cars need to be programmed with the vin of the vehicle otherwise the swapped computer is useless.

[@dydyanaguilar8748]

I just bought a automatic Miata and will def be referring to this video. It has given so much insight and the work needed to be done which is a bit but nothing a regular joe can handle 🤙🏽.

[@sebsnts]

im manual swapping my miata at the moment and so far you don't have to take the dash out but tbh most of it is pretty easy. for me I did not have to take out the headers or even the exhaust out. i left it hanging from the resonator to the muffler hanging. and also I worked on it on jackstands so it is possible! Lastly, make sure you have the flywheel bolts for the manual flywheel since they are very different. Miata mecca and ebay are your best friends for finding those bolts since most hardware supply stores will not carry them due to being such a rare bolt size. good luck!

[@dydyanaguilar8748]

Awesome thanks for sharing man, what year is your Miata? And just a curious question if year will matter for most swaps with removing dashes or not

[@sebsnts]

@@dydyanaguilar8748 I have a 2000 NB. 2001 and higher apperently need to replace the starter due to a bracket but I’m no too sure since like I said I have a 2000. The dash did not have to be removed for me but man was it hard removing clips and taking the pedals off. I just reccomend dropping the steering column since it will free up a lot of space to work upside down

[@dydyanaguilar8748]

I have an 07 and I’ll for sure keep that in mind, I still need to replace the canvas too but most likely getting a hard top for it and wanting to wide body it as well, so idk if I’ll do cosmetic or mechanical stuff first because I really do want have a manual

[@Eggx86]

Hi Taylor! It would be great if you could leave a complete list of the parts needed for the swap in the info section of the video. Thank you!!!

[@jamesford2942]

A lot of pressure plates have access to the edge of the clutch. I feel that with my finger tips at all three access points and align with edge of the clutch and pressure plate by feel. Works every time. The only time I use a clutch alignment tool is doing a dual disc clutch to align the splines with each other.

[@No-timeforimbeciles]

I have a manual swap on my car, maker did not make this model in manual, Peugeot 407sw 2,7 hdi V6 biturbo, did not do this work, I found it for sale with the change done, I love it, it is special, even Peugeot dealer had never seen it done before 😊

[@weirdplasticlabs]

I'm glad that Good Mythical Morning is finally getting into the automotive category

[@tanboi1105]

Never thought I'd have Jake Paul teach me how to manual swap a car

[@thebrawlingmemereviewingam7968]

He does look like Jake ngl

[@Martinnc30]

I myself auto to manual swapped my is300 wagon here in the uk as they only sold them as autos and only sold about 600. so true what your saying about auto cars and the life they have mine was high mileage car but super clean with a full service history for a great price. And it was just the challenge i needed next as a home brew mechanic great fun. Love these kind of videos and watching you and Ben work as i also part out fix cars Lexus is200s as a job so its cool to see how you do it there in the states and see the cars that come about and get broken for parts or fixed up and given a new life.

[@kinohermit9159]

I got my Miata in automatic and it’s sooo clean the interior is well taken care of and it’s in such good shape no dents. And I want to swap it, all my friends tell me just get a manual but all the ones I find are just torn up

[@ridebc153]

How’d the swap go ?

[@SaaBAroS]

this only took about a day wow great video i’ve been waiting for a great quality swap video THANK YOU!!!

[@alan6832]

I hear old Chryslers need different crank shafts because the crankshafts for automatics have no mounting hole for the pilot bearing. That is the main thing keeping me from manual swapping my 1978 Dodge B-200 van, though I wouldn't mind also getting a smaller engine like from a 2.5 Dakota and putting in the engine and trans as a unit. I want the light engine for extra traction, because I have spent far more time digging out of mud and snow than I have accelerating.

[@michaelwilliams3164]

Great video bro, one of the best out there but you forgot one thing. You forgot to show the audience how to do the wiring from automatic to manual. There’s a great demand for a video like that

[@bloodydeath1222]

but newer cars you also need a new ecu when you change to manual right

[@aforerunner1773]

Definitely yes

[@DAN007thefoxx1]

Can't wait to do this to my '65 Mustang. No ECU to worry about but there is a vacumn fitting in the back of the engine that will have to be blocked off. And I may choose a cable over a hydro clutch.

[@dohcerik]

Just got my tans to start my swap this video was uploaded at a perfect time

[@MrChris7582]

if you dont have a lift like this alls you need is car ramps and a transmission jack to take it out and put the new one in. I did a swap for a 1993 Camaro z28. so much better now not too hard either for do it your selfer.

[@2CabrasLocas]

NB's look SOOOOOO much better. That squeaking noise... Is Sandy gettin it on with some stray on an old noisy mattress in the background?

[@achikennugget38]

Just finished swapping my 99 NB from auto to manual about 2 months ago. Wasn't too hard, but I agree the auto trans is a beast compared to a 5 speed. The two things that took the longest was fitting the clutch and brake pedal (I didn't realise I could just swap the brake pedal itself and spent probably 4 hours under the dash on my back lol) and the wiring as it isn't that well documented. I managed to get the speedo to work by wiring it to the speedo input pin on the cluster (though I just balled up the wire and shoved it in instead of using a actual pin). I have still yet to wire in the trans neutral switch but the car seems to drive ok without it. I did jump the clutch switch so the car does start without pushing in the clutch. The one downside to manual swapping clean auto Miatas is that none of them came with limited slip diffs from the factory. Also shout out to Ben for having NB speedo sensors for cheap lol, I bought mine from him.

[@robertofigueroa5011]

How do you get a hold of Ben for parts?

[@achikennugget38]

@@robertofigueroa5011 he has a website, bensusedmiataparts.com

[@robertofigueroa5011]

@@achikennugget38 thanks buddy. Also I'm going to do my swap next week and am mechanically experienced and not fazed by that aspect, but the wiring side I am unfamiliar with. What do you mean you jumped the clucth sensor? And what wires are absolutely necessary for start up? I've heard, reverse, speed, and neutral, but can't imagine speed and reverse light sensors impeed with start up. I have also heard that you can use the auto ecu but there is a certain wire in the console required for start up. Any tips would be helpful.

[@achikennugget38]

@@robertofigueroa5011 I've read you can use the auto ecu but I never tried starting mine with the auto ecu. I used a manual ecu for the swapped car and put the auto ecu in my already manual racecar. The auto ecu started like normal in the manual racecar if that helps at all. As far as the wiring goes, I drew out a diagram on what wire goes to what but I can't decipher it now lol. I remember just staring at the wiring diagrams in the factory service manual for a few hours though. I drew out the main auto trans connector that has 9 wires going to it , the speed sensor wires, instrument cluster wires for the speedo, and the auto trans control module wires. For sure I can tell you the black/red and black/blue thicker gauge wires on the auto trans connector can either be wired to the clutch switch or just straight jumped together to engage the starter with or without pushing in the clutch respectively (I just jumped mine as I've read that helps the thrust bearings last longer). After that, uhhh, I have a line drawn connecting the red/yellow and black/yellow wires on the auto trans connector and it's all labeled as "reverse switch". If I remember correctly, the red/yellow is the reverse ground side and the black/yellow is the positive side. I guess that doesn't really matter as I think the reverse switch on the manual trans gets connected to either of those for your reverse lights. Next is the speed sensor, the manual trans has a blue/yellow and blue/white wire and on the auto trans harness side there should be another connector with a straight yellow and straight orange wire, the blue/yellow connects to the yellow and the blue/white connects to the orange. Then from there, you need to find the auto trans control module under the dash and connect the yellow wire from there to one of the pins on the instrument cluster. The pin is on the larger white connector on the left most side of the cluster (from sitting in a US driver's side car, not sure on right hand drive). On that connector, you'll need to either add a proper pin or ball up and shove the wire between the white/red and black/red(or violet, is what I have written down) pins. For the straight orange wire at the auto trans control module under the dash, I have it connecting to the, uhh, "a/t black/white" with another line going to "auto trans control module". I think I may have just jumped the straight orange wire to a black/white wire that is also at the auto trans control module connector under the dash. I would recommend pulling up the factory service manual wiring diagrams and just following all the wires. That's about it, only real thing left would be the trans neutral switch which lets the ecu know when the trans is in neutral but the car runs ok without it (I mean it might effect the idle but I'll let you know if I ever connect it). There's a few posts I found searching around but they are also kind of vague and you'll have to eventually just go at it. Best of luck.

[@robertofigueroa5011]

@@achikennugget38 thank you brother, pretty detailed off the top of your head lol.

[@cdmc012599]

You can also use bread yes as in like white bread to remove the pilot bearing or brushing. Works very good on fact.

[@nestalicortez9082]

Thank you for educating me with your awesome video. My future plan is for my 2011 Hyundai Genesis Coupe 3.8 from Auto to a 5-speed can't wait.

[@Animetrucker93]

I had a manual swap 99 Ford Crown Victoria had a lot of fun in that car!

[@jok3yjesu339]

Honestly manual swaps are really easy on older cars, but my recommendation if you are on a budget slowly buy parts and stuff like the pedals you can install the pedals and just have the clutch pedal sitting there until you get everything but if you are a tight budget slowly buy the parts

[@realwarlord6137]

Thank you so much I have an is300. The auto trans is done. I really want to manual swap it.

[@IDlikeanEvo]

Taylor content is Fire content , period .

[@pospc2]

Well this is informative. I have a g35 auto that has a lot of engine mods. I plan to swap to a manual once the auto takes a 💩. Also can tell my G is lowered. It has a little road rash. Another note,if you are doing something and getting frustrated, stop and take a drink and a short time out. Its far better then keep working at it. When you come back with a level head it will likely go easier.

[@Blaze_1221]

I want to manual swap my 1989 Ford Ranger 4X4 XLT some day... I hope I remember this video!!!

[@philipholman1713]

I found a super clean o7 G35 with the sport shift 5at while it's still fun with the build I plan for the car I think the manual offered might be a better choice because of reliability. Nice video

[@benyounge9672]

How much money you reckon it costs to Manuel swap?

[@philipholman1713]

@@benyounge9672 I think if you bone yard all the parts you are looking at 2500

[@-smp-scientificmethodpersp838]

Great advice about the clutch alignment tool! Automatically makes this video more useful than other videos on KZbin. Nice coverage on the rear main seal info too. Most of all, you did get a vital piece of information: you didn't forget to cover the info on the pilot barring. Lol that was probably the most useful piece of info, besides the reverse light switch. But, I don't think you guys mentioned anything about the speedometer.

[@SuperKDash]

List of things needed 2:10 Tools needed 4:30

[@tweedjohnny8740]

I'm going to swap a bmw e46 automatic wagon to a manual this video is clearly what I needed. Also if anyone who reads this who has done what I'm going to do please let me know what items that gave you any trouble. Thank you ahead of time.

[@nwgt8355]

Is that a squirrel in your shop??

[@MrWilliamtomkinson]

Remember your speedo will be out now because the diff ratio will be wrong. also as a note for new players. not all cars are that easy to swap. take the 3.8 Buick v6, (or v6 Commy motor here in Aus) they auto and manual cranks have a different bolt batten. also some cars like the izizusu trooper (holden jackaroo) have some major changes that need to take place, depending on the model it can be anything from a wiring loom and ecu swap to a complete re fabrication of cross member and chassis components.

[@07baile]

The series one has a different bolt pattern the series two have the same pattern

[@MrBurndan]

Bread is the best thing hands down to remove pilot bearings. Great video, tons of great info.

[@SkuuTerrrrr]

I agree my moms friend is selling me there 2003 civic ex sedan it’s a auto but I plan on swapping for sure I’m getting it for 2000 but it’s got a d16 it’s a steal fs

[@ForOdin]

You don’t have to take the dash out....but it helps

[@carbon_kusanagi]

I have a 2015 Forester and I wanna manual swap it so bad. I’m so scared of doing it tho cause I don’t wanna screw it up

[@jasonrock3266]

i believe the diff ratio for the auto is different than manual, youl probly need to swap that too

[@billyrudd2786]

And no lsd

[@Matt_Lanzer_13]

Depends on the car... the automatic diff in some cars is a higher ratio, and most of the time, the higher ratio allows for quicker acceleration. It’s not horsepower but it’s free speed so to say

[@gokartsminibikesandmore9925]

Some cars are not this simple ive heard of cars that need a FULL manual wiring harness to do a swap

[@inspectorlunge3887]

@Gokarts, Minibikes, and more! Are there any vehicles that you're aware of that wouldn't need the ECU to be swapped out or to have the software changed on them, or can I just leave the same ECU in some vehicles after I've put in a manual transmission? I have a '96 Ford Taurus...don't know if that's particularly helpful, but just in case.

[@edim108]

I was thinking about a manual swap on an old Ford LTD with 460. Not only would it be a lot quicker with a manual instead of the 3 speed, but the fuel economy would be significantly better with 2-3 more gears.

[@cram196700]

This is so cool. Is it possible to do a manual transmission across model/manufacturer? Like put in a BMW manual into an Audi or a Volvo?

[@brycewaterman4270]

Lol couldn’t watch the second half of this video because that metal clanking sounds was driving me crazy!

[@eliwilliamson3404]

This was super wholesome, u both are really knowledgeable. Great video

[@alexandramccormick7063]

when you did this did you have to cut the wiring to hook up the reverse light and everything underneath?

[@chanceakins1575]

Half the stuff I wanted to see your boy did off camera. Like installing the clutch pedal and slave cylinder.

[@WolfCommander]

Something I don't think you mentioned in this _(old)_ video was drivetrain layouts. Fwd vs Rwd _(miata being rwd for those that don't know)_

[@mxwizzard]

Great video tell Ben Roy said thanks for sending out the speedometer cable so fast and it works great. Keep up the good work and great videos

[@Pika_Gabe]

Love this! Driving stick is actually safer because you can't text and drive! (Which is probably why most defend auto.) And if you're a passenger and the driver passes out, you can just put it in neutral, pull over, and pull the e-brake.

[@muybitchin2180]

applicable in automatic trans too

[@Billy-gh9ih]

You can text and drive bro you just can’t do it it’s ok it’s a skill I can smoke eat and drive at the same time

[@Pika_Gabe]

@@Billy-gh9ih Yeah a year ago I couldn't, but now I sip my coffee while I drive to work. I still won't look at my phone though because my ADHD ahh gonna forget I'm driving and wreck if I do that 💀. But there ain't no way anyone could heel-toe downshift while eating/texting at the same time. So I should have said is that its just a lot harder to text and drive with a manual when upshifting or downshifting but not impossible cause cruising on the interstate is the same as autos.

[@kushroll92]

I’ve needed this video my whole life

[@RatomirFilipovic]

Keep this one as daily,its so cleaaan!!!!

[@mrlithium69]

for some reason I noticed your glasses look really nice @ 4:00 and I dont normally notice stuff like that

[@zetaholicc]

crazy. wanted to do this to my miata. wanted to see if it was worth it eventually. how convenient

[@young_kosmo-9447]

Thanks, just manual swapped my mini van

[@moldycaptain7001]

It even comes with a sun visor!!! Awsome!!!!

[@LilSaint001100]

I have a 2009 Crown Victoria sitting at the lawn and wanting to do the swap. Got all the info already. just need the space and parts,

[@MistaE]

Iv always wondered if u can swap a automatic transmission into a manual one and I finally found a video on how to do it

[@johnog8358]

What about the clocks? Alot of autos show on the dash some gear information also alot of autos are 4speed and manuals are 6 like Celica for example.

[@andrufuentes5819]

Thank you so much, I have this stupid automatic supra celica, and it would be the perfect car if it was manuel. I really needed this.

[@dylanlozano5823]

ive done this swap if i give any advice do the interior first and just cut the pedal much less hassle but it will fit if you dont its just very tight also you have to splice the reverse and speedo wires to get those to work

[@leepeezy]

How do you splice the speedo wires and reverse

[@shaylalincoln3015]

What wires did you used for the neutral safety switch, and reverse lights.

[@rene5861]

2 years late but im thinking of swapping my 18 focus to a manual cus the dct is straight trash and im sure i. The long run id end up spending more money on fixing the automatic trans rather then Jst getting the manual put in

[@davidjanosek7071]

Watching the video without sound. Where do I get this done. I have not found a compatible manual transmission for a 3.3 Toyota V6. So please get me a list of parts I need and where I need to go to have the conversion done professionally. I certainly do not want the end result to look like the picture. If that is the case I would have my console modified and adopted to accept the new shifter, plus a much more premium handle and linkage as it appears. My motor has more than stock Power. Can you tell me the torque and horse power limit of the trans.

[@CeinX]

Or you could recode the transmission and put in electric shift lever or paddle?

[@frankietuned]

Taylor you've come along way, slapping your camera to end the videos is soooo Emilia Hartford lol

[@JohnDoe-wi7eb]

I hear the automatic engines have smaller cams for lower end torq thus, if you swap to a 5 speed it will be slower than a stock manual miata.

[@bukumaze3861]

Sounds like a myth

[@gradyhernandez4699]

Im thinking on installing a manual on a 2013 versa from.automatic to standard.

[@bernardobarajas5570]

How would u manual swap a car that never came manual what would I have to do abt the ecu

[@mylescrumel9633]

Bernardo Barajas that’s what I thought ....

[@krislinder7460]

ecu's can be retuned, i would be more worried about the clutch pedal assembly

[@peressonpaul3303]

It's amazing 😁! What if it's a Chevy Trax 2020 AWD premier? And how much is it gonna cost at all from automatic to manual? Best regards

[@JoseSanchez-wc3fp]

Hi Taylor I have a idea for a vlog and it will be a service for so many people that purchased a automatic ford focus and fiesta. Those two cars have TCM problems from factory and ford is doing nothing about it but they have those cars in manual. A step by step video would be much appreciated thank you

[@LegoBobRoss10]

Hey I know it's been a few years, but what wires did you need for the reverse lights, speedo, etc.

[@blackrogue86]

10:18 THATS WHAT SHE SAID!!!!

[@davebenedict7986]

I didn't hear anything about the driveshaft length. Did you have a driveshaft from a manual car, or is the driveshaft the same for both? I ask because that is not always the case.

[@LITTLEBRAT775081]

I never mentioned what the clips from the old trans go to ? like does it not cause check engine lights and such ?

[@kano2444]

8:48 nice splice edit!

[@J2A61]

I have a th350 in my camaro it comes factory with a 700r4 I have a 3000 stall so my rpm on the highway is up there 3k doin 65mph so naturally it makes a lot of heat so I'm wondering if a 6speed would solve my issues ???? Plus it should make my car a lot faster grabbing 6 gears instead of 3

[@yanuchiuchihaanimegamesand3907]

After watching ChrisFix's videos this seems a bit... underwhelming despite being good. Must be the lack of medium thread locker....

[@bradgreen5174]

Yanuchi Uchiha: Anime, Games and Ramdomness and soapy wooder

[@zachlocklear5233]

Out with the old, and in with the new

[@tylerwilcox2750]

What you spend doing that you can find one that already is manual and rebuild the engine if you were concerned about it being worn out with the money you would save from not swapping it you could rebuild the engine and do anything else that’s worn out, but that’s just my opinion the car wasn’t designed for that even if it comes with a manual option that one probably is slightly different

[@marcosAlcoforado]

Dude what about all those software crap communicating backing and forth from engine to transmission. Will that work on modern CVT trans ?

[@AutoN8GT]

I saw once a video talking about a belt guide for the crank that the manual engine has in case the car stalls - but the auto equipped engine doesn’t have that guide. How do you keep track of all the small differences?

[@burninruber60]

About How much would Ben charge for the parts to manual swap a 92 Miata?

[@AdHominem888]

Would help to take the flexplate bolts off if you hold the crank at the front of the engine..