How to upgrade a FAKE JBL CHARGE 2 + (Charge 2 Plus)

This is a quick upgrade of the FAKE JBL CHARGE 2 PLUS speaker, not the greatest because I made some mistakes along the way but that's how we learn to be better.
Thank you again for watching please consider Subscribing and also click on the like button if you enjoyed this video.
Hope to have you again on the next one.
For collaboration contact us here - [e-mail]

[@TaylorSoloaiJR]

This is a quick upgrade of the FAKE JBL CHARGE 2 PLUS speaker, not the greatest because I made some mistakes along the way but that's how we learn to be better.

[@makuletyt2800]

U forgot to add JBL sticker on

[@makuletyt2800]

In passive raditor

[@TaylorSoloaiJR]

You clearly didn't watch the whole video. Already explained why they're not there.

[@noob_gamerz_yt5665]

i always love you'r videos specially when your upgrading fake jbl's

[@iamrhinz2817]

nice upgrade bro it fits all the parts inside. how many watts of the speaker & amp you use for this project?

[@TaylorSoloaiJR]

Each speaker driver is rated at 10W but can go up to 20W peak. Amplifier is rated at 15W per Chanel if powered by a 12v battery. I used only 8 Volts so not sure how many watts it outputs at that voltage.

[@darylcribb5561]

Well at less you put a speaker back in tack & no damage was done to the speakers good job bro 🙂👍

[@Medaniel_AndHis_friends.]

I was wondering if you could add the upper buttons it would be greater but it's still great

[@TaylorSoloaiJR]

Yes it's possible to connect the original buttons the upgraded amplifier. I chose not to in this video because I really don't use it. In future videos I will show hot to connect them.

[@NikkeTM]

@@TaylorSoloaiJR How??

[@ArvindKumarA]

I have the same device but there's a problem and hope you can help. The device doesn't power on but charges fine with the charging indicator increasing to max. When power button is pressed, nothing happens. What would you suggest might be the issue or how to diagnose please?

[@TaylorSoloaiJR]

Even if its plugged in?

[@ArvindKumarA]

@@TaylorSoloaiJR yes, unfortunately

[@TaylorSoloaiJR]

Could be anything, maybe the power button is the first thing to check.

[@kalashnikovhubaran1782]

Can you do a db test before and after the upgrade? To test how much louder the new parts compared to the original parts.

[@TaylorSoloaiJR]

Thanks, I will try and buy that tool and incorporate it in my future videos.

[@valentine1079]

i have question tho what was that board for? at 3:40? Really curious what was that for coz i'm planning to upgrade my fake jbl charge 2+ like what you did here nice vid. Btw

[@TaylorSoloaiJR]

That's the Bluetooth amplifier board It's called "XY-P15W"

[@bridgetteivantamayo]

what if put a speaker from a broken jbl charge 2+ and then just convert it to pam8403 is that ok?

[@TaylorSoloaiJR]

I am not sure but its possible with some modifications, I would ditch the passive radiators though. They don't work well.

[@jerrygonzales2860]

May i know the speaker wattage you replaced.

[@TaylorSoloaiJR]

4 ohm 10W, peak 20W

[@mariskanurkhalishah6560]

do the left woofer broken?

[@jesrelsunit60]

Xy-p15w isn't the best amp, but is does it's job the best when paired with eq. I have made literally the same thing as how he upgraded his and I tell you, it's not that loud... It clips when the amp is in full volume, so I have to lower it on the amp to match my phone max volume. So people if u want the best loud sound output on this amp I suggest u use a 12v 18650battery pack.. on a 20 w stereo speaker (10w per speaker) that way the amp can get a good supply so it won't clip when in full volume...😁

[@TaylorSoloaiJR]

The reason I did not use a 12 volt battery pack for this upgrade is because the speakers I used can not handle the power at MAX volume. Yes its true it distorts at full volume but I rather have it distort than getting the speaker drivers destroyed if I accidentally play something at full volume ( I am saying this from experience).

[@kenzilla8096]

Hi Taylor. I'm curious why you said the speakers will burn out. I check the specs and the speaker are 10 -20 watts max and the XY-P15W is 16 watts max at 12v. That seems like a perfect match like your previous videos.

[@TaylorSoloaiJR]

The peak is 20W actually and I thought the same thing too but if you remember my Fake JBL Xtreme 3 upgrade that I used the same setup..well the speakers started to make noise because it couldn't handle the power. It's okay with songs that don't make a lot of bass but when it comes to heavy bass music then you gotta be careful at around 95% volume.

[@kenzilla8096]

@@TaylorSoloaiJR thank you for your reply. That really helps. I will be waiting for more of your vids. 👍

[@LightYagami-cw5np]

Does reversing only the one side of passive rads can somehow improve the sound quality?

[@TaylorSoloaiJR]

Not really, I just reversed it because for some reason it makes annoying noises when the bass is strong.

[@ultrongaming1177]

Looks cool 😎👍

[@methinventions5158]

Nice even I upgrade my fake jbl charge 2

[@PYROBULAKENIYO9537]

Bro ware you buy the full range 2 inch drive from Philippines 🇵🇭 Region 3 Bulacan. Thanks bro

[@TaylorSoloaiJR]

Shopee but the shop no longer exists.

[@PYROBULAKENIYO9537]

@@TaylorSoloaiJR awts 😢

[@wildwildwes370]

Taylor soloai why did you removed the JBL sticker from the Fake JBL CHARGE 2+ .....@

[@TaylorSoloaiJR]

I don't like it

[@Kinen_TheGachaLife]

I don't like the sticker because they cause look weird

[@lfm9910]

Nice 👍👍

[@нубикс]

Not bad 😁👍

[@pgreenlaw85]

How do you tell if it’s real or fake? Can you upgrade the real one?

[@TaylorSoloaiJR]

Fake always have the "M" button, but it's getting harder with new fake models now because they don't use the "M" anymore.

[@ralphlauren3824]

saan po kayo nakabili ng speakers? nagsearch po ako sa shopee 4ohms 8w lang po nalabas sa 45mm size. if ever po na palitan ko speakers tapos hindi ko pinalipat board eh ok po ba magiging result compared sa before palitan ng speakers? salamat po

[@TaylorSoloaiJR]

The store I bought it from is no longer on Shopee (it got deactivated). If you wish to only change the speaker drivers I suggest only using speaker rating of 3W because the amplifiers the fake JBL comes with is not strong enough to power 5W.

[@Prince-xf9qg]

Hiii notice pls. Pls do jbl charge 2 mini pls

[@ashishjaddoe6131]

Make a video how to remove the side thing and that cap thing and how to reglue it

[@TaylorSoloaiJR]

It's already in this video.

[@ashishjaddoe6131]

@@TaylorSoloaiJR ok

[@ashishjaddoe6131]

@@TaylorSoloaiJR but i have a charge 3 and this is a diffrent one in the vid i sae rhat u open it like a bottle cap does it work in the charge 3 to?

[@TaylorSoloaiJR]

Oh okay I'll try and see if I can find a Charge 3 copy.

[@ashishjaddoe6131]

@@TaylorSoloaiJR ok if u cant is ok have a great day

[@aspopulvera9130]

if this is in human term you basically turned a scrawny looking guy into a super soldier

[@powerROBY]

potresti aggiungere alla descrizione le varie cose da acquistare per fare la modifica? magari con i link grazie

[@ibambiei9334]

Puedes traer la bocina yayusi c7 porfavor

[@jesrelsunit60]

I literally made the same thing but with blue color JBL charge 2 body lol same amp, same battery and same switch, but with micro USB charging... Even same drivers!

[@jesrelsunit60]

I'm using it while watching this vid rn too!

[@Trashybasstester]

Where to buy battery i need one

[@TaylorSoloaiJR]

Just search "18650 battery" online. They have them everywhere.

[@Trashybasstester]

@@TaylorSoloaiJR already have 4 but i need a 8 volt battery pack that is tiny im gonna.make the same as yours

[@mcthyfepiresfigueiredo6354]

Name the music?

[@SerhatTheDear]

Check the desc

[@jeff033]

New subscriber here Baka pwede arbor na lang yan po 😅

[@zenifjoachimllaneta1086]

Pls add the stickers back into the passive raditor

[@TaylorSoloaiJR]

Huh? 😂 You want me to make a video just to do that?

[@zenifjoachimllaneta1086]

@@TaylorSoloaiJR yez

[@Kinen_TheGachaLife]

Noooooo no no no no no no my JBL Charge 2 replica has no stickers. When i put stickers because they cause look weird.

[@jpguingab668]

shessh lezgoww

[@VtuberRex]

Try this pls: who wan the bass

[@yanlli511]

🤦‍♂️🤦‍♂️🤦‍♂️ JBL ➕➖🎵 working on the rgzmp tomorrow today bb I euro on internet internet

[@TaylorSoloaiJR]

I have no idea what you just said but thanks for commenting

[@RahmatHidayat-wl9fr]

Spill the ingredients

[@marshmelloallrounder]

Tg113 jbl copy unbox

[@blackitty611]

4:52 Decided to remove the stickers cause they look weird. Important safety warning: When i bought JBL Charge 2 from online, Shopee (for those who i wonder) When i unboxing JBL Charge 2, (above speakers i check) it has no stickers in my JBL Charge 2, when i put stickers, cause they look weird. Stay safe!

[@Ishowslow_233]

Stop copying sml's music

[@TaylorSoloaiJR]

Who?

[@Ishowslow_233]

Oh u dont know the youtuber

[@TaylorSoloaiJR]

@@Ishowslow_233 Nope, I've never come across that channel before. The music in this video is actually from KZbin's official audio library, which means anyone can use it.

[@Ishowslow_233]

Oh sorry i dident know

[@Ishowslow_233]

And i have the exact same fake jbl charge 2 plus as u 😊