Comparing 3D printing model websites objectively to find a winner

  Рет қаралды 71,712

Teaching Tech

Teaching Tech

Күн бұрын

Пікірлер: 188
@jeffb5798
@jeffb5798 Жыл бұрын
Printables is the first site I go to when looking for models.
@psychedup74
@psychedup74 Жыл бұрын
me too. If I don't find it on Printables then I go to Thangs.
@Victor_2019
@Victor_2019 Жыл бұрын
Same here
@MartinWolker
@MartinWolker Жыл бұрын
Printables is the best website for all 3D printers.
@oakld
@oakld Жыл бұрын
I "switched" my priority from Thingverse to Printables too, they did a good job
@ChrisHorton343
@ChrisHorton343 Жыл бұрын
They also can auto import in slicer if your using prusa slicer
@lornelorne5727
@lornelorne5727 Жыл бұрын
It would've been better if your comparison table used the site names instead of the logos. Watching your video, I had no idea which sites were which each time you presented the comparison table.
@KrisKanyon
@KrisKanyon Жыл бұрын
Of course we noticed the Prusa XL in the background. Looking forward to your review.
@fouroakfarm
@fouroakfarm Жыл бұрын
Also worth mentioning is Yeggi which is an agnostic search engine. When I need something very specific thats usually where Ill head first (like parts to repair objects)
@wisconsingoprogoalie8125
@wisconsingoprogoalie8125 Жыл бұрын
That would be Yeggi (2 g’s), but I agree with everything else said. Just don’t want people looking for the wrong search term.
@fouroakfarm
@fouroakfarm Жыл бұрын
Oops, thanks for the correction, Ive edited my post@@wisconsingoprogoalie8125
@TheMasterCrabs
@TheMasterCrabs Жыл бұрын
My default model search engine is Yeggi, but it seems to focus more on Thingiverse, Cults, and MyMiniFactory. I don't think I've ever seen Prusa or Thangs in the results and will search them separately.
@silentmodetv
@silentmodetv Жыл бұрын
Printables and Thingiverse are my preferred options, as they allow the downloading of models without being forced to log in.
@Iam2lazy2register
@Iam2lazy2register Жыл бұрын
thanks for the video, although it feels like a missed opportunity ... for me the biggest incentive to go to one side or the others would be 'do I find what I am searching'? So when I clicked the video I hoped for an analysis of the size and the quality of the catalogue, preferably broken down by type of "thing" you are searching for (figurines, modelling, RPG, art, engineering parts, spare parts, useful objects, decoration, 3D-Printer Mods, etc.) Perhaps this could be a follow up video?
@richardferran94
@richardferran94 Жыл бұрын
A word about Cults, they are banned from the 3d printing subreddit due to many controversies, including doxing.
@TheCyberSpidey
@TheCyberSpidey Жыл бұрын
This, they have withheld payments from a bunch of model sellers and then banned them.
@sitichybrid
@sitichybrid Жыл бұрын
On the other hand, they are one of the few sites that don't immediately cave to copyright abuse by some corporations that are overzealous on ip. I've also seen some creators have issues with mmf, apparently they have implemented discounts/free trials for creators without informing them.
@Zeldur
@Zeldur Жыл бұрын
... Good to know. Eventually I want to sell some models so I guess cults is kicked off that list. Thank you
@oobasnork
@oobasnork Жыл бұрын
Are any of these claims recent? I only recently learned of the doxing incident. I started selling on Cults in June this year and haven't had any issues cashing out, etc. Any chance they've learned from their mistakes? If they ever withhold my funds I'll be happy to pull my models from their site and try someplace like CGtrader. I passed on Myminifactory because they ask you to open a shop for around $30/month and that would probably be greater than my monthly sales right now. Kind of absurd for a site littered with obnoxious advertising.
@MB-THX1138
@MB-THX1138 Жыл бұрын
Yeah, where money is involved. But on the other hand their business model of giving a financial opportunity to creators who put out more refined content worth paying for, is a good space
@cdsmakestuff
@cdsmakestuff Жыл бұрын
I was surprised that at the end you didn't give a nod to the sites that, if your just looking for a model and don't really care about the other features, scrape a lot of better known model repositories and just provide a list of the models from all... Yeggi being one of the better known examples but there are others.
@Otakunopodcast
@Otakunopodcast Жыл бұрын
One warning about Cults3D is that they have been accused in the past of withholding payment to creators, and in one case, a Cults3D employee publicly "doxxed" (revealed private information about) one of the creators who (rightfully) complained about the situation. This was some time ago (2 years iirc) and I believe both parties have buried the hatchet (albeit after a very noisy and contentious back and forth) however I would still be wary of supporting them.
@mvadu
@mvadu Жыл бұрын
I remember that.. I submitted a request to get my account deleted at the time..
@VorpalGun
@VorpalGun Жыл бұрын
GrabCAD can occasionally be useful for specific engineering models. But I think I only found useful models on it once or twice.
@CJICantLie
@CJICantLie Жыл бұрын
What's nice about grabcad is almost everything is in step format.
@TheSuburban15
@TheSuburban15 Жыл бұрын
I found a model of a 4010 fan that I needed to make an accelerometer mount on GrabCAD. I also found files for 2020 and 4040 extrusion mounts for cameras and endcaps. Please upload CAD files when you upload your STLs and 3MF files.
@FowlerAskew
@FowlerAskew Жыл бұрын
Yeah, I think GrabCAD is particularly useful for getting reference models for existing products and parts
@Distanc3
@Distanc3 Жыл бұрын
My experience has been that trying Printables first and then jumping to Thangs if I have a problem finding what I want has always been successful.
@grimsdagger
@grimsdagger Жыл бұрын
Thank you for all your hard work and videos. I learned how to 3d print from your channel, and I always direct people to your channel when they ask about 3d printing. I don't know if you're looking for video ideas, but I think it would be cool to see a 3d printed flight yoke and rudder peddles. Or some cool prints for a racing sim setup
@paintballercali
@paintballercali Жыл бұрын
I feel like printables really set the bar. But the presliced maker world files are pretty op.
@OmegaGamingNetwork
@OmegaGamingNetwork Жыл бұрын
I agree with this, but because my primary printer is a Bambu Labs P1s, maker world makes a strong case for itself. I usually prefer slicing things myself as I find many people use pretty terrible settings, but sometimes I remember I need something asap and the ability to just fire off a print and it be sitting there ready when I get home is pretty damn nice.
@paintballercali
@paintballercali Жыл бұрын
@@OmegaGamingNetwork I saw a KZbin video for the mark rober compliment nerf blaster. I was 100 miles from home and was able to use the handy app and have one sitting on the build plate when I got home. The majority of files I print all of these sites refuse to host so I'll always slice my own files but if my 5 year old can run the 3d printer it's pretty neat.
@petermarin
@petermarin Жыл бұрын
You could do a similar comparison video for cad software as well (maybe include some left field entries that people have not tried/ heard of)
@MadeinSwabia
@MadeinSwabia Жыл бұрын
Concerning the „cloud printing criteria“ of your comparison, you missed the printables integration of prusaslicer which does the same as the other website: The 3D Model gets imported in the slicer with one click in the browser. This feature just needs to be activated in the settings of prusaslicer and your printables account.
@I_Do_Not_Know_What_I_am_Doing
@I_Do_Not_Know_What_I_am_Doing 10 ай бұрын
Please keep updating this topic periodically.
@MaxMichel89
@MaxMichel89 11 ай бұрын
I always start at Printables, and then go to thangs or thingiverse or else. Not only because I have Prusa Printers, but I really like the Point system and to post makes and join contests. Also uploading models there feels quite rewarding.
@Soarpix3D
@Soarpix3D 7 ай бұрын
Great comparison video! I was surprised when my models appeared in several parts of the video 😊
@CraftyEnelrad
@CraftyEnelrad Жыл бұрын
I like having the choice among several. It gives us choices as well as backups should a site get neglected again. It also gives us options based on our individual needs. Some sites are better for me based on my skill level and project choices. Other sites may be helpful to others because they offer more challenging resources. Choice is good. Thanks for the videos. Printables and now MakerWorld are my two favorite sites.
@bruceyoung1343
@bruceyoung1343 Жыл бұрын
Thank You for the comparison of the various 3d repositories. Very informative
@brianholdridge1860
@brianholdridge1860 Жыл бұрын
This is a great comparison video. I drifted away from Thingyverse before Utlimaker got involved. I have been using Printables. I now have a Bambu Labs P1P and an A1 mini on the way. Maker World and Printables now share my attention when looking for models.
@marchenplay
@marchenplay Жыл бұрын
EEEH! THE CHAOSBUSTER APPEARS IN THE MMF ADS! :D thanks for the video! I just got very excited seeing one of my models there. thanks for all your videos, they've helped me through so many years of 3d printing.
@mtayseer82
@mtayseer82 Жыл бұрын
One nice feature of Printables is collections. Some dont have it (Thangs), others have it but harder to use
@heyspookyboogie644
@heyspookyboogie644 Жыл бұрын
I’m surprised “content restrictions“ wasn’t part of the consideration. For example, cults 3-D is the only one I know of that allows “adult“ STL’s.
@secv
@secv Жыл бұрын
Printables allows files marked NSFW
@Adam-rs4en
@Adam-rs4en Жыл бұрын
Printables looks like my new site. Thanks TT!
@colin8670
@colin8670 Жыл бұрын
Hi Micheal, got an idea for a future video for you; I found out recently that PETG is an excellent material ti use as a transition support layer for PLA models. But what I am most curious about this is - what other filaments types are compatible with other different filament types that can be printed together to allow composite features? - ie, for example - can you print a TPU layer on top of harder filament type to create a built in rubber seal for your model? can mixing multiple different filament types in layers enable models to be created with composite style material specs? Can you design a material using layers of carbon fibre reinforced core around a more flexible filament type for far greater strength? I am interested in these questions, thought It might make a good video for you to explore. Also - I could have sworn I saw a car with a TTR racing branded trailer travelling past Loch Village in Gippsland a few week ago, was that you?
@BobTheDolphin.
@BobTheDolphin. 9 күн бұрын
thanks man my mom got me a 3d printer and couldnt stand letting me wait a day to open it and i was getting worried because i couldnt figure it out and you helped me a lot.
@capitalinventor4823
@capitalinventor4823 Жыл бұрын
What I don't care about with Printables contests is that there is no moderation of entries. Often there are many entries that don't meet the entry requirements and are not removed from the contest page. There's a flash contest on right now for paining helpers. On the first row a monitor stand shows up. Further down there is a lamp, an artistic beehive, a pen holder to replace the hotend on a 3D printer, and more. This contest isn't that bad for entries that don't meet the entry requirements.
@Dark0Storm
@Dark0Storm Жыл бұрын
I've never seen ads on MMF. Long live the ad blocker 😊
@XYZ-print
@XYZ-print Жыл бұрын
Very good video, it was necessary to compare them. Personally, I'll stick with Thingiverse and Printables.
@giannyberger
@giannyberger Жыл бұрын
I was just about to design the IKEA bracket and this video popped up. Thanks 🙏
@japplefilms3514
@japplefilms3514 Жыл бұрын
These features are born from competition. We need too many platforms in order to have *any* that are good.
@Bebamyotamaki
@Bebamyotamaki Жыл бұрын
I agree. I quess that 3 to 4 is hoing to stay for long run and others will fade away or merge with the others. Those that are for long term will exeprience the competition based development or specialize to something.
@MikeKleinsteuber
@MikeKleinsteuber Ай бұрын
Surely you should have included model quality ?
@CDRaff
@CDRaff Жыл бұрын
14:18 How in 2023 someone could, with a straight face, say that "competition is bad" is beyond me. Does anyone really want a "KZbin" of 3d Printing sites where they can use their size to manipulate what you consume, and eventually start blocking you if you don't "bend the knee" if you create the wrong content, or you don't want to be force fed ads? Healthy competition keeps the consumer safe, and we should foster healthy competition at every turn not yearn for monolithic entities that can and will exert their power.
@exactpause9218
@exactpause9218 Жыл бұрын
I really like Printables, I like the community aspect and the competitions. They can be a boost in creativity :)
@Loneman_OG
@Loneman_OG Жыл бұрын
Ads?! Do people _still_ put up with ads?! I don't remember the last time I ever saw an ad in a browser. 🤔🤨
@RestNPizza
@RestNPizza Жыл бұрын
Printables is coded to include progressive web app functionality so, at least on an android phone, you can "install" it and it acts as a normal app on your phone.
@tanialimacosta
@tanialimacosta Жыл бұрын
About the adds that pop up on the screen, you can "eliminate" them if you use a browser called Brave, because it has an embedded add-blocker
@MCsCreations
@MCsCreations Жыл бұрын
Thanks, Michael! 😊 Stay safe there with your family! 🖖😊
@claytongame-hughes3803
@claytongame-hughes3803 Жыл бұрын
As a tech manager for the broadcasters behind the a-league for the past 3 years and a follower of your videos, I was very surprised to see you wearing a Wanderers jersey!
@CryptikDesign
@CryptikDesign 11 ай бұрын
Makerworld has an entire Wiki, is that not considered a guide?
@MrGTAmodsgerman
@MrGTAmodsgerman Жыл бұрын
Now a comparsion with several print on demand services would be interesting. Which offers the best quality and price.
@calebwyatt3076
@calebwyatt3076 Жыл бұрын
Are we not talking about that PrusaXL in the background??
@3dreams106eng
@3dreams106eng Жыл бұрын
As always, super useful. I have published a video too about 3D models repositories with some other sites too 😊
@ScottHess
@ScottHess Жыл бұрын
The problem with every manufacturer attempting to get into the game is that most manufacturers are barely decent printer manufacturers, their website fu is atrocious. What I really want is a fast site with search that makes it easy to drill down. What I sometimes get is a janky website which floods me with irrelevant results that I have to sift through manually. It doesn't help that people try to game the sites, but it can matter whether site operators see gaming as increased engagement or a negative to keep try to manage.
@Tom-sq9co
@Tom-sq9co Жыл бұрын
Even though I don’t have any prusa machines, printables is my go to.
@jeremyholef
@jeremyholef Жыл бұрын
Thanks for the clarification ❤😊
@canadiansparky64
@canadiansparky64 9 ай бұрын
I haven't found any reviews on maker worlds maker lab video to 3D scanner.
@mlubecke
@mlubecke Жыл бұрын
Michael, nicely done…. I appreciate all the work you put into this….
@Atlas.X9X
@Atlas.X9X Жыл бұрын
Top notch comparison. Thank you for sharing.
@Dark0Storm
@Dark0Storm Жыл бұрын
You don't get exclusive models from My Mini Factory tribes. Most of the models you get will also be put up for sale at the same time. What you do get is a collection of models released by that creator each month and (almost?) always for far less money than it would cost you to buy each of the models individually.
@brynyard
@brynyard Жыл бұрын
Usability on printables: Search field "jumps around", tries _really_ hard to give an immediate result (and thus most often being unhelpful), doesn't allow you to simply search in models (you have to wait for the autosearch to finish, then click on "Models", or you'll get a "hybrid" result with forum posts etc), it also "translates" a lot of words to "common misspellings" and thus make some words unsearchable, and just to add more salt to the wound it is _dead slow_.
@Penche_1903
@Penche_1903 Жыл бұрын
Printables is the best!
@juhu34
@juhu34 Жыл бұрын
Grabcad is my favourite 👍
@omegahelix
@omegahelix Жыл бұрын
i would like to know if paying for models gets you better quality compared to freebies (generally).
@luciebubenikova4590
@luciebubenikova4590 Жыл бұрын
printables can open models to prusa slicer without a download
@Zombull73
@Zombull73 Жыл бұрын
Thangs is my first stop simply because of their cross-site search results. Saves time. They could all benefit by cooperating in that way, frankly.
@JeffersonIettoNovo
@JeffersonIettoNovo Жыл бұрын
hard to believe that you didn't consider in the list/rating, websites that are login gated, from those that are free to access and use for everyone! 😔
@ameliabuns4058
@ameliabuns4058 Жыл бұрын
Damn subscriptions for a model is very annoying and a bad idea
@QuakeDragon
@QuakeDragon Жыл бұрын
I literally was researching this very question last night!
@Grummfy
@Grummfy Жыл бұрын
For search, you forget something, the support of translation. If you are not a native English speaker searching for something in other language can be difficult. Printable do it pretty well.
@MadScience45
@MadScience45 Жыл бұрын
Hard not to mention Yeggi. They cast the widest net and will return results from all of these sites.
@mscir
@mscir Жыл бұрын
Thanks for talking about thangs.
@farmlife228
@farmlife228 Жыл бұрын
I'm looking to buy a new 3d printer looking to spend around 600 I've had a used anycubic i3 mega it stopped working after a couple prints wat do u recommend
@woodwaker1
@woodwaker1 Жыл бұрын
I have two Bambu a X1 and a P1P, the A1 looks like a great printer for under $300 or under $500 with the AMS
@JBCool0729
@JBCool0729 Жыл бұрын
One thing you forgot is how fast is the web site. Some of them are very slow.
@carleviston
@carleviston 5 ай бұрын
Cults 3D looks at first interesting, but the is a huge catch: first hey charge 20% of your sales, that looks okay..Then when you sell some of your work, it takes a long time to get the sale validated. Then when validated, and you want to cash, sudden they pop up a message that they only pay out when you reach an amount of 500 euros!! so guys if you only sell a little for a low price it means they keep YOUR money in their pocket and refuse to pay out until 500 euros. We are checking now if that is legal or not. As you cannot keep money that legally doesn.t belong to you..
@kenlee224
@kenlee224 Жыл бұрын
good review ❤.
@АлексейЗапольский-и1м
@АлексейЗапольский-и1м Жыл бұрын
Undoubtedly, The Gatalog
@michaelhilton6080
@michaelhilton6080 Жыл бұрын
CLAIM YOUR PRUSAMETERS MAN
@dhupee
@dhupee 10 ай бұрын
Maybe the shipping price isn't worth it Especially overseas shipping Happens to me in Indonesia too(neighbors), everything from Europe/US can be very expensive, not only caused by shipping but also customs, so Chinese brand is the most sensible here both for printers and filaments
@RealShebang
@RealShebang Жыл бұрын
I like printables since the interface seems to get in my way the least. Bambu's makerworld at least offers a lot of functionality if you own one of their printers, so I like that one too (and it's mostly a rip of printables anyway). The rest I find a bit tedious to navigate and actually use. Thingiverse is ok because it has a lot of models, but it's an ugly interface.
@michaelalix4943
@michaelalix4943 Жыл бұрын
Geez are you a NASCAR guy or a politician with all those sponsor patches on your shirt?
@fuijika
@fuijika Жыл бұрын
Pritables is my favorite and I don't own a Prusa printer so this is unbiast.😂
@googleyoutubechannel8554
@googleyoutubechannel8554 Жыл бұрын
Uh, how about availability, quality and 'printability' of, you know, actual models?
@devmacosx
@devmacosx Жыл бұрын
You set out to find out which one is the best and then just didn't ... I am dissapointed and frankly a bit aggravated. Thanks for the overview I guess...
@capitalinventor4823
@capitalinventor4823 Жыл бұрын
He gave you information to help you decide which site is best for you. He's very good about not telling you what is best for you because everyone's situation is different.
@404-UsernameNotFound
@404-UsernameNotFound Жыл бұрын
5:42 That 🖕 on Thingiverse 🤣
@kehet4409
@kehet4409 Жыл бұрын
If makerworld gets a green mark on cloud printing, so should printables. Those both have exactly same feature.
@paintballercali
@paintballercali Жыл бұрын
No they don't.
@str8up598
@str8up598 Жыл бұрын
Looks like bamboo labs cloned the hell out of Prusa...👀
@woodcat7180
@woodcat7180 Жыл бұрын
Makerworld is "inspired" by Printables as much Bambu slicer is "Inspired" by Prusa Slicer. Why not just say it as it is. It's a rip off.
@alexanderscholz8855
@alexanderscholz8855 Жыл бұрын
The Site that have what i need. I'm simple Guy😁
@Etrehumain123
@Etrehumain123 Жыл бұрын
Printables is the best, and thingiverse is the largest catalog because the oldest. Period.
@matthewcampbell149
@matthewcampbell149 Жыл бұрын
Ey nice jersey mate!
@jacobrollins37
@jacobrollins37 Жыл бұрын
As nice as having everything all in one place sounds, it would not help the 3D printing community. Competition helps the community grow. No one place will have all the answers.
@JoshuaCamacho09
@JoshuaCamacho09 Жыл бұрын
If you're trying to get rid of the ads, I know a guy. Just saying
@noanyobiseniss7462
@noanyobiseniss7462 Жыл бұрын
Yeggi Yeggi Yeggi Yeggi Yeggi Yeggi Yeggi Yeggi Yeggi Yeggi
@alfredoghost2306
@alfredoghost2306 11 ай бұрын
Thingiverse does have paid models
@Blue.4D2
@Blue.4D2 Жыл бұрын
⭐🙂👍
@pusnirizda5481
@pusnirizda5481 Жыл бұрын
You know ublock exists, right? But thanks for the video
@warriorclassmedia
@warriorclassmedia Жыл бұрын
🧨🔥
@RobSchofield
@RobSchofield Жыл бұрын
Gambody?
@ItsPassing
@ItsPassing Жыл бұрын
Please change your CBat intro music!
@Derkiboi
@Derkiboi Жыл бұрын
clearly the best is the G A T A L O G
@stevvieb
@stevvieb Жыл бұрын
Printables can also send the model to prusa slicer like bambu labs. Its not on by default its in your user settings
@christianmontagx8461
@christianmontagx8461 Жыл бұрын
There are allready Metasearchengines for 3D Models, so this question is obsolet.
@User-ec2bh
@User-ec2bh Жыл бұрын
I feel like onshape should be on the list as well.
@Grim_medic
@Grim_medic Жыл бұрын
So, i know you dont want to impart opinions, but with so much information a recap, or overview would have been really useful. And without a summizatuion its so much information that i cant really fo anything with it. To me this video was not that useful.
@mikgus
@mikgus 9 ай бұрын
Watching this video made me decide to NEVER buy a creality printer
@KieranShort
@KieranShort Жыл бұрын
Michael - why are you posting this at 3am mate? Get some some sleep!
@TeachingTech
@TeachingTech Жыл бұрын
All on a schedule, don't worry I was sound asleep when it came out.
@wykonczeni
@wykonczeni Жыл бұрын
Thingiverse for me is nr 1. The reason is "download all" full of jpegs. 2nd place is stlfinder xD Cant even imagine working with clouds or phone when internet is full of models with errors and wrong dimentions. I always have to check or edit files cuz i dont like plastic waste. Also i belive there is too many models and variations, like people uploading every sh*t in hope to be fame or just for free space. My opinion is its pointless keeping everything like in archive. Rare things should be kept, and popular ones with many wariants should be sorted in more inteligent way in near future.
@PulsefiredGaming
@PulsefiredGaming Жыл бұрын
yeggi is the winner because it searches most of the hosting sites
@peterkallend5012
@peterkallend5012 Жыл бұрын
These lists seem to be arbitrary in they're subjective assessment that can be summarized by saying "draw your own conclusions, I just made this video for the money and the algorithm." Nothing more than clickbait.
@mephisto7549
@mephisto7549 Жыл бұрын
cults3d
Jankiest 3D printing tips that actually work
16:20
Teaching Tech
Рет қаралды 130 М.
13 Must-Know Sites to Find the BEST 3D Printed Models
22:38
ItsMeaDMaDe
Рет қаралды 95 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
Where to find FREE & PAID STL files for 3D Printing?
20:23
Frankly Built
Рет қаралды 265 М.
5 Slicer defaults I ALWAYS change #3DP101
15:27
Maker's Muse
Рет қаралды 1,2 МЛН
Don’t use desiccant bags unless you do this!
25:25
CNC Kitchen
Рет қаралды 431 М.
The 3D printers I actually use, and what annoys me about them
14:31
Teaching Tech
Рет қаралды 147 М.
Size isn’t everything - 4 ways to print LARGE parts with a 𝘀𝗺𝗮𝗹𝗹 3D Printer!
20:36
Made with Layers (Thomas Sanladerer)
Рет қаралды 333 М.
The best 3D prints to organise your life
13:53
Teaching Tech
Рет қаралды 431 М.
Best Useful 3D Prints
18:36
Triton Print 3D
Рет қаралды 184 М.
Support material complete guide for 3D printing
19:37
Teaching Tech
Рет қаралды 158 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН