A detailed unboxing of the RC10 40th Anniversary Limited Edition Kit
Пікірлер: 83
@jongonegone12624 ай бұрын
should be a classic paper assembly manual included. going cheap with internet scan. nice video man.
@turtlelabs4 ай бұрын
I was thinking the same thing. If you build a retro RC, building off a digital screen will ruin the experience.
@jecoboost14404 ай бұрын
That kind of money Should give you a manual Book. That's kind of part of the fun Reading the Book.
@Sirrom02063 ай бұрын
Now I have to dig my RC10 out of the garage. I've not looked at it in ten years!
@irritablearchitect4 ай бұрын
Good to see the original nylon parts have stayed, along with the old six gear trans.
@Rnazzaro4 ай бұрын
Did not know this was happening. Saw your video and immediately ordered one. Most excited I’ve been to get an Rc car!
@coygtrc4 ай бұрын
We could hear your joy when unboxing this classic 😊 I hope my order will come (pre-ordered from a famous european shop in Germany, not long before they stopped and said they won't receive a lot 🤕🤞), if not, it is what it is... Enjoy the build 👍🤝
@RCRetro4 ай бұрын
I hope you get one. Stay positive and fingers crossed.
@coygtrc4 ай бұрын
@RCRetro Well, it seems you brought good omens as I received the shipping notice 🤩🤝
@AddamsPlayground4 ай бұрын
I am glad you got yours! Thanks for the look through the contents. I am a little worried about mine, it is showing delayed in transit so of course the worst case stuff runs through my head! Looking forward to seeing yours built, I am still on the fence with mine. Enjoy the build Ari!
@RCRetro4 ай бұрын
I'm sure it will show up sooner than you think.
@AddamsPlayground4 ай бұрын
@@RCRetro I did get a new notification last night is in Maryland now so it got past its delay point somewhere between CA and MD!
@roccomarcelli8214 ай бұрын
I Thanks for opening yours, because I am not opening mine. Never opened the first rere still sealed. I got mine from my local hobby shop. Great video.
@DTW-bx2vy4 ай бұрын
Ah yes the Team Associated - RC10, the vehicle Jil Losi Sr. & Jil Losi Jr. helped create for Team Associated when they worked for them before starting Team Losi.
@RCRetro4 ай бұрын
That is correct.
@j0hnnykn0xv1lle4 ай бұрын
As soon as I saw the box on your table, I knew what happened and went right to their website Kev.
@Jaysqualityparts4 ай бұрын
I got mine yesterday #1776 🇺🇸
@mikegordon51334 ай бұрын
Awesome number!!!
@jonthomas84874 ай бұрын
Mine was supposed to arrive yesterday but was delayed due to a rain derailment. I’m looking forward to receiving mine.
@peterhootonrc14984 ай бұрын
Thanks for sharing. I’d given up on ever getting one, so glad it’s being re-released and really looking forward to getting mine in a month or so 👍
@RR-ho5ek4 ай бұрын
I ordered mine 2 weeks after the release announcement, had to wait cause I already shot my wad on the redcat fusion crawler, and had no idea about this. Who knows if there will be enough left for me. It is amazing how many people come out of the woodwork to buy any iteration of an rc10. This one was supposed to be limited to one per person, so maybe it will stop some of the horders, with unlimited funds, and a soft spot for this old buggy.
@lo27134 ай бұрын
Nice, i got my pre order in as soon as i could, just hope i get it 🤞 still a while before we get them in the UK 😭 but cant wait to get it out on the track 👌
@Meenie664 ай бұрын
Congrats mate. Wish I couldda afforded one atm, no doubt there will be none available in the future.
@MadBeeRC4 ай бұрын
Sweet bit of RC history!
@IowaBudgetRCBashers4 ай бұрын
The box stand is awesome. Would’ve been cool if they had packaged it in bubble packs like the original though.
@scottlemarquand88473 ай бұрын
No Remote? No Motor? No Battery? I had my RC-10 when I was young, my whole family was lucky enough to race as our Dad had a good job. I remember having to buy a "servo" I think to upgrade the Remote.. what was the original called? When I traded it for a toolbox years later, I had a large collection of motors, batteries, gears and tires.. Damn I miss that thing!
@CarolusRex13464 ай бұрын
Very nice! Looking forward to follow the build of it👍
@powersmodelgarage4 ай бұрын
Nice box of 1984! Awesome!
@Mark_51504 ай бұрын
If they were selling replacement parts I'd consider buying one. I sold my mint A stamp during COVID because it was just collecting dust (and the price skyrocketed). If I bought one of these I'd like to actually drive it and not worry if I break something. By the way, the original ReRe is about the same price as these now.
@emerilnut4 ай бұрын
To answer a question you asked in the video, my RC10 CC kit that I'm building now (purchased Mar 2024) had the body inside a bag just like your 40th. I'm waiting on my 40th to get shipped.
@rexy_yee84314 ай бұрын
That’s odd as my cc the body wasn’t in a bag , and the chassis was loose inside the body and scuffed the body , I contacted ae and within 48 hours a new body arrived
@RCRetro4 ай бұрын
I rewatched my unboxing video of the CC... my body wasn't wrapped and the chassis was facing up and also wasn't wrapped which attributed to the inside the body getting scratched up. If yours was wrapped and not scratched than you're one of the lucky ones.
@kashmurray11994 ай бұрын
I like that better than the CC. Beautiful Gold.
@blzr2bull4 ай бұрын
Looks awesome, funny how people never do the driver figure on the Rc 10. Hope you do add the driver.😎👍🏼
@RCRetro4 ай бұрын
There will be a driver figure. Promise.
@blzr2bull4 ай бұрын
@@RCRetro nice! It’s not 100% complete without the driver. It’s always left out with this car. We need to bring that back with this classic!😎👍🏼
@jdpaslRC4 ай бұрын
Wow I did not know AE sent kits out already. Mine is still awaiting fulfillment.
@basher-854 ай бұрын
same here, I bought it april 18
@jdpaslRC4 ай бұрын
@@basher-85 Mine was April 19. LOL
@DavidMartin-lj8yj4 ай бұрын
I get mine Monday! Super stoked!
@Chevy4Life4 ай бұрын
So ppl who don’t open it want get the full feel I like that 👌🏾
@LujanGamingsupporterID4 ай бұрын
quality content here bro . i dropped a like i'm watching and supporting fully
@RCKickschannel4 ай бұрын
Congratulations Ari!
@pattyofurniture56744 ай бұрын
😅 check the inside part of the chassis
@jkit32584 ай бұрын
Received my this afternoon. Cannot decide on the motor. A new brushless Reedy or a vintage Reedy. 🤔
@aviano724 ай бұрын
Very nice ! 0:40 Did not look like Doug Heffernan 😉
@pattyofurniture56744 ай бұрын
I got mine last Friday ❤🎉 awesome 😎
@alfredyost79724 ай бұрын
I got mine yesterday. The thing that I find interesting is that the chassis is numbered. However, You have to open the box to find out what number you got? Thoughts?
@RCRetro4 ай бұрын
one of my biggest suggestions for the Clear RC10 was to laser etch something on the chassis and to have them numbered. So.... I'm glad Team Associated did that with this kit. I like the laser etching, the 40 stamped into the chassis and its a holographic sticker placed on the inside of the chassis. I like it very much.. However, much like anything you collect in todays time... I don't think these kits will hold value like NIB kits that are from the 80s and 90;s. How often do you come across NIB vintage RC10 kits... not often.. Tons of people are collecting the 40th anniversary kit to keep it as an investment. So in years to come, plenty will still be in circulation and will be asking stupid money.
@alfredyost79724 ай бұрын
@@RCRetro You are right, very few original RC10s were saved new in the box. They were raced and enjoyed. I do have an original "A" stamped RC10. I spent a long time getting the correct parts for it. I first tried to use the 30th version of the RC10. The parts are a different gold color. I wonder if the gold color on the 40th matches the original or the 30th? Sounds like a future video to me. I did sell all of my 30th parts that I bought for a lot of money just before this 40th came out. Not sure if that was a good move. Thoughts?
@pat75644 ай бұрын
Nice Thunder Tiger
@k0conutk0mando4 ай бұрын
I got mine last week. Had plans to build and race, but decided to upgrade my ebuggy so selling atm.
@pluggedev84643 ай бұрын
This is already sold out- hope they make a second build of them
@drewp91124 ай бұрын
the digital code isnt working yet. though the cc is the same car and you can get the manual off the AE website
@RCRetro4 ай бұрын
thats exactly what I did my friend. started building mine today.. Did Bag A, B and part of C. So dumb they send out kits and the digital code thing isn't working cause they never posted the directions yet... SMH...
@drewp91124 ай бұрын
@@RCRetro i have got mine done to the point of the trans basically waiting on a bearing kit. i never found spare e clips in my kit either. lucky to have some in my parts stash. so in the meantime am working on the body, going for the box art look for the most part, not the easiest build so far imo.
@bcastromusic4 ай бұрын
Nice one. I blame you I didn't even want this.. or the cc and now I have both.. just ordered this one. I already have my original from '86 that I built with my dad and I have a couple other mint originals. Absolutely no need for this but what are you going to do ;)
@RCRetro4 ай бұрын
Exactly... no need for it other than to say "I got one" lol.... and have fun building it.
@fogcityrc48744 ай бұрын
What motor choices and electronics are you all considering?
@RCRetro4 ай бұрын
Just going to keep it a roller... No electrics. It would have been nice for Team Associated to come out with a vintage motor label like yokomo did for the Dog Fighter.
@rcicons49154 ай бұрын
lol Mine came in today as well
@LukesVintageRC4 ай бұрын
Excited for you buddy. Mine is delayed unfortunately. Prayers are it’s ok though.
@Paul__FC4 ай бұрын
I just hope to get one for bashing.
@martinhsrc66994 ай бұрын
What are your thoughts on the lack of a manual?
@RCRetro4 ай бұрын
It doesn't bother me. There are so many digital scans of the original manual online plus you can use the RC10CC manual for this one. Besides all they would do is put the 40th logo on the manual they used for the CC... no biggie.
@pattyofurniture56744 ай бұрын
Vintage!!!!!
@mariomessinese52874 ай бұрын
It's designed in the USA, butt made in Taiwan...
@RCRetro4 ай бұрын
Yes correct. I got a little ahead of myself in the video and said "Produced In USA" and right after I shot the video remembered that AE was bought out and is produced overseas now. And of course looked at the box again and saw "Designed in the USA".
@bradkalman23534 ай бұрын
Are you going to race it in the deep woods racetrack?
@RCRetro4 ай бұрын
Nope
@bradkalman23534 ай бұрын
@@RCRetro why not?
@bradkalman23534 ай бұрын
They should keep this out permanently for people to buy.
@AsurasWrath1644 ай бұрын
They are in fact very limited. We here in Germany only get miniscule doses of the kit. Very unfortunate and unfair.
@MrSneakyGunz4 ай бұрын
Mine's delayed by a train derailment. 😢
@MrSneakyGunz4 ай бұрын
In today.
@RCplamodel4 ай бұрын
Top rig Brother!! Thatz a lot of cool 😎
@rimfirejunkie74274 ай бұрын
No bearings. Poo. I have one on the way. Guess Ill need a bearing kit.
@RCRetro4 ай бұрын
Unfortunately not. I don't plan on running mine so the metal ones will do.
@stumpycatvm71154 ай бұрын
i think tamiya needs to stop playing around and rerelease the dyna-storm
@RCRetro4 ай бұрын
I agree 100 percent.
@eskimojoe65644 ай бұрын
This is cool but for $400 no stealth and plastic parts really not worth it.
@danjaz20004 ай бұрын
Dont waste time replying to this comment . Build.... hurry up. Hehe