Team Corally KAGAMA 4S has a Problem THEY should Fix ASAP

[@zeroshelfqueens]

Team Corally gets their inspiration from Jaguar😂

[@rcguygarage]

@@zeroshelfqueens you saw that 😂🤣😂🤣

[@krish3033]

@@rcguygarage I was wondering…lol, are they gonna be mad that I got the red Asuga instead of the blue one?

[@gratefuldabs9775]

When arrma had the bad clips on the 4s axles I took one of those fuel hose clamps that you pinch with pliers to open and cut them into little individual rings. They were much stronger but I used a little CA glue to hold them from sliding around. They are still on my outcast to this day

[@gratefuldabs9775]

You can also use a little heat shrink to keep the clamp from falling off

[@rcguygarage]

@@gratefuldabs9775 MUCH better metal👍💯

[@ChristopherNeilF]

I’ve been into RC cars and buggies for well over 20 years now, I’ve got a few HSP’s, Arrma’s, Corally’s and Hyper go’s. Not much of any parts are stocked in hobby shops in Western Australia, and they can be a long drive away. Most Hobby shops seem to have lots of Traxxas stuff though. So to keep my RC vehicles going i have to order online or find a way to fix it. Parts online takes forever so I usually order extra . I recon Arrma and Corally are fantastic, I might get a Traxxas next but everything breaks, My Arrma Typhon chassis bent last week, that’s a two to four week wait. Your repair on the Corally drive shaft is excellent , good job 👍

[@T1Jafo]

You do not play the "paid via by products, if give positive only reviews" game. It is your honest, “no holds bar” so to speak, opinions in your reviews, is the main reason of what keeps me around and sometimes donating to your videos. You are not afraid to tell it 100% how you see it. *That and we share the opinion that we are happy with Nov 5 2024 . * *So, if you want to get rid of me, start doing postive only promotional type videos. :P 😂🤣

[@rcguygarage]

@@T1Jafo 😂🤣😂🤣

[@T1Jafo]

10:59 I admit, I am a dumb ass when it comes to certain areas. What the hell is "peel" steal? You used the same reference here: 18:31 as well.

[@rcguygarage]

@@T1Jafo 😂🤣 it's GUY-ism wording 👍💯 but yes similar to certain machine shop type stuff

[@T1Jafo]

@@rcguygarage 🤣😆

[@tobybennett6582]

Since when is 3.6 storage?

[@rcguygarage]

@@tobybennett6582 since every pack I have 👍💯

[@dylanjones7655]

Both my front axles did that on the 2nd battery. I snatched some pins from two other axles I had laying around ground them down to fit.

[@L2theWcarscoffeelife]

You got lucky and caught it mine shot out and said see ya!! I did get a free one from warranty that came with a nice bag of cand too😋😋 I put marine heat shrink on my cvd and no problem since.

[@rcguygarage]

@@L2theWcarscoffeelife Yes, but is that the correct resolve? You should not have had to lay a finger on it to fix a problem they have with their product. I want to know how they are going to fix this so that people don't have to. 👍💯

[@L2theWcarscoffeelife]

@@rcguygarage I agree this is a problem when I brought it up they said it never happened during testing 🙄🙄

[@chriszak3282]

Put a dab of locktite 638 where the retainer band ends meet once it's installed again with a toothpick so some gets under the clip, stuff is amazing, once it sets up it does not let go

[@cristovalmontoya5222]

Team Corally used the spark arms to beef that part for an upgrade strength?

[@Luke-en2tk]

They changed to this driveshaft design from the Syncro4 and have had some early problems. It would have been nice for them to put out an official statement but what RC brand ever does that

[@rcguygarage]

@@Luke-en2tk it's a risk to not admit fault or faulty parts in either direction.

[@JmanRc]

Nice thats a good idea with the shrink wrap it should work for awhile may ware or decompose from sprays and stuff used like wd40 or other chemicals used and stuff maby I dunno maby stuff like that won't eat it ....

[@SOMNIOHM]

_You know what an auto manufacturer would say.._ _"Eat Shiiii GUY!".. "You decided to modify our OEM Vehicle from its original form, by mounting up aftermarket wheels and tires that are NOT OEM spec!"_ _"This is on you Guy, we have now flagged your VIN in our system, and the remainder of your factory warranty is now null & void!"_ _😂😂😂Craaazy!_

[@rcguygarage]

@@SOMNIOHM 😂🤣👍💯 every day of my life 🍺

[@SOMNIOHM]

@@rcguygarage _😂😂Thought you'd like that one! AH HA!🍻_

[@SOMNIOHM]

@@rcguygarage _I could just imagine you then trying to argue that with them too!... They would then go on to say.. "We saw your KZbin Channel GUY!"_ _"We saw you doing your_ *_FULL TRIGGAH Pulls_* _up and down the street trying to inch that last mile-per-hour out of our vehicle AFTER having modified it!!!_ *_Warranty - VOID!!!! End of story!_* _😂😂Lmmmfao!_

[@rcguygarage]

@SOMNIOHM Self-Deprivation and incrimination while providing accurate video proof of said actions and distasteful inaccurate language

[@SOMNIOHM]

@@rcguygarage _Yup! THAT sums up the basis of each video!😂_

[@rccarsandmusic2641]

Tire swap, motor overheat without a fan, no pinion swap, just to run as factory lol. Iconic batteries swell and are inconsistently give the worst charge.

[@rcguygarage]

@@rccarsandmusic2641 unknown what you're getting at

[@rccarsandmusic2641]

@rcguygarage Team Corally is a great brand with great cars right up there with Arrma. Arrma is more durable and has the parts network but with the two Corally's I own I only had to replaced the knuckles of old design. Not like some I know I paid money for my cars/trucks so I'm at the other end of trashing them to death and then blame the manufacturer. Yes your videos are fun! With yourself, a little over board and lead to, the abuse and trashing was a design flaw. I have been following you a long time and I have seen you do this with Arrma and Traxxas. Yeah I see ratings!

[@rcguygarage]

@rccarsandmusic2641 I guess I'm misunderstanding what your point is. Each and every reaction interaction I have with anything can be treated like fresh and new. I could care less about ratings views if you're saying I'm doing things for ratings you're wrong. I do this to have fun point blank. That's it. Each and every day I laugh and have fun no matter what. Life is way too freaking short guy to be a pill. I'd much rather have smiles for Miles. 👍💯

[@rcguygarage]

@rccarsandmusic2641 Don't forget for some the trashing to death is the whole point. It prevents someone from potentially doing something that could land them into some fairly sizable trouble. There used to be a term going postal. I'm sure you were aware of that. I have a very short fuse and that fuse can be spontaneously combusted so I would rather take one of these toys and have fun with it instead of resorting to a different way of being that I am no longer a part of. 👍💯

[@rcguygarage]

@@rccarsandmusic2641 as far as a "great brand" For me, I'm sure it's a good brand or okay finding parts for a TC in my location is just about as easy as getting parts for an MJX or a hobby toy grade RC and if enough people make enough complaints, maybe TC will figure out how to make the parts more readily available in the states such as making these vehicles show up in more hobby shops. Who knows?

[@Hillbillypunk]

Maybe also put em on so the leading edge of that band isn't going to catch when it's going forward? If you said that already I missed it..

[@johnmiller4553]

HEY GUY. IS THAT CHARGER ANY GOOD ?? FAST - SLOW ??

[@rcguygarage]

@@johnmiller4553 in my experience this is a good value priced charger that gets the job done. I always have these chargers on max amps output to the pack and the pack just accepts whatever it wants or the charger provides seemingly what the pack will take. ALWAYS LISTEN TO THE MANUFACTURER'S INSTRUCTIONS, NOT GUYS 👍💯 originally I used the t240 Duo and that was great and I still have four of them. Only one has failed on a channel but that is AC and it still functions on DC power which is a good thing cuz that has become. I guess a travel charger. The 400 provides more power. No, I do not have any accurate way to measure any of this. I am just basing this off of fizzle experience. You cannot realistically faster charge these batteries in my opinion cuz that's what I think becomes the hazard. Lipo batteries are like a holiday season parking lot is how they get charged. The Fuller they get the slower they go 😂🤣

[@johnmiller4553]

@ 10-4 THANKS FOR REPLYING 🤙🤙🤙🤙🇺🇸🇺🇸🇺🇸

[@DannyKhan-o6f]

Cool video 👍, sorry but I couldn't help saying this, please don't charge the batteries inside safety first 💙

[@rcguygarage]

@@DannyKhan-o6f very good info Unfortunately, I'm a safety third kind of guy 👍💯

[@DannyKhan-o6f]

@rcguygarage your welcome 🙏 enjoy your day friend

[@rcguygarage]

@@DannyKhan-o6f you as well

[@DannyKhan-o6f]

​@@rcguygarage💯💙

[@jasedavies9288]

It's unlucky Ive got 4 TC cars this has only happened once in 6 mounths

[@rcguygarage]

Unfortunately this is common with this RC and it's current run of new axles. Others have commented similar issues. YOU might be the lucky one 👍💯

[@jasedavies9288]

@rcguygarage must be lucky I got 2 asugas a syncro and a spark. I had this issue on 1 of the asuga and never since. I run my cars ALOT. I replaced it and it hasn't happened since. I've heard of this happening but I might work on covering the coil

[@rcguygarage]

@@jasedavies9288 they just call it insurance👍💯

[@RC4us]

I think you like to stir the pot because the page before it clearly says 2s-4s what your reading is the programming options but plug in a hobbywing card or try to set the esc while in program mode and see what happens 😂 😂

[@rcguygarage]

@@RC4us stirring the pot in the upper right hand corner 😲

[@rcguygarage]

I've already said many times I don't read 😂🤣

[@rcguygarage]

I just like the pop-up areas and coloring sections

[@RC4us]

@ you 😂 crack me up 😂

[@RC4us]

@ lol I remember struggling with those bands with my ARRMAs I finally found a trick you know I remember you having those issues with the ARRMA I got my v2 a week b4 they went public still have it and I've never had a issue now I also have the v2.5 the v2.5 outcast and Mojave 4s all since they came out never a issue Did you ever think you expect to much out of a rc I mean what rc do you know of that doesn't have a single issue out of the box I've had a lot of different cars by a lot of companies and I can't think of 1... I got mine yesterday so I will do some proper send and test it out for bashing.... big sends coming soon

[@Hillbillypunk]

Im not a rocket surgeon, but it kinda seems like a bad design. Like centrifugal force is just gonna huck those off (basically what ya said) Probably shouldn't have that bend to it either.

[@idan678]

tbh happened to me on my kagama 6s when run it on 4s... shame

[@rcguygarage]

@@idan678 did you find the same type of metal band or was it lost completely?

[@idan678]

Nope on the kagama 6s they used a different type of band that have like 2 layers and not single one, and actually I was excited to see that they "upgrade" it cause I thought it'll solve this stupid issue🤦🏻‍♂️🤦🏻‍♂️

[@idan678]

And I used zip tie to temporary fix it after the heat shrink failed on me

[@earlmoorhead5555]

Needs a cheap China junk decal 😮 🤣🤣Rc guy garage not 2 packs 🫣😜

[@rcguygarage]

@@earlmoorhead5555 😂🤣

[@rogueFactor]

come on, you can fix it yourself. That's what us hobbyists do.

[@Horst_Jobolski]

Hey Guy, at one point or another in your video I expected to see torrents of blood. But you have proven that you can handle knives. So you ammies aren't just good with firearms 🤣. Many greetings from Germany

[@rcguygarage]

@@Horst_Jobolski 😂🤣😂🤣

[@aussiedigger1441]

Ovonic lipos has destroyed 2 rc helicopters of mine, Sab goblins $$$$ 4500Mah 6s ran 2 minutes and hit lvc hard!

[@rcguygarage]

@@aussiedigger1441 THAT'S on YOU for throwing in CHEAP FUEL into a PERFORMANCE MACHINE 😲👍💯

[@aussiedigger1441]

@rcguygarage 100% mate!