TEAM GARMIN BARRACUDA MECHANICS

Created on marzo 21, 2012 using FlipShare.

[@massivejester]

I guess that bike has to get its bearings regreased after that wash. Goddamn!

[@takeru51]

+massivejester water proof grease

[@nightfrailer]

Wishing I still had my Biopace chain rings from my first race bike in 1987. I'd be cool again.

[@boltonred9464]

He's using Morgan Blue products made in Belgium, most pro teams use their stuff even when sponsored by other cleaning product manufacturers.

[@s2stuges]

Old pro mechanics used to use diesel to clean drive trains, took off the old grease and oil but left a film on the chain and such, I dunno what that guy was using no doubt a Park product of some kind... judging his stand and tools were Park..After the chain is clean and dried, after you apply fresh lube you'll see the mechanic sealed the chain using grease, very helpful considering it looked cold and probably wet where they were racing.

[@hleli8715]

good job team !

[@redjumping]

Just goes to show, heavy rock guitar does indeed go with anything - base jumping to gently polishing a bike.

[@weeksy68]

I was thinking of my shimano 105 biopace chainring from 87 as well , good to see were still riding all those years later.... whats the difference between them and the rotor rings ? Same concept ?

[@andyslaybids]

Gorgeous

[@MattClineInspectallHomes1212]

Thanks buddy ! is it just bike chain lube?

[@luisfernandosantamariadiaz2177]

genial

[@themrjhable]

I believe what they are doing is using degreaser then chain lube. But my mechanic said you can just run the chain through a cloth and just reapply chain lube. So your choice.

[@TheCasiemir]

good job

[@alb.1911]

impressing...

[@MattClineInspectallHomes1212]

so do you want to keep your chain clean or greased? and is that just water ? im a new rider! any tips to keep bike running well would be appreciated !!

[@blackmiskov]

baby can do this! you see his hands ? clean as a baby!

[@Pantovinator]

that bicycle costs more than my motorcycle

[@Jaso0n1986]

correct me if I am wrong but not sure if HIGH pressure water is a good idea being blasted into bottom brackets and head tubes. Yes he wasn't directly on it but still!!

[@MetalSlab]

Does anyone know what the fellow sprayed into the Di2 derailleurs at 4:20? I thought they were supposed to be sealed maintenance-free units.

[@jimmcdowell6000]

So much for never using a power washer on your bike. I guess they swap out bearings so much it doesn't matter. I would love to have that job!

[@kuitao]

Does he use grease instead of oil for chain lubing ?

[@keasone]

What spray is he using??

[@HackHunter1835]

why would you need to use a pressure washer to clean a bike? just askin

[@themrjhable]

wash(with soap) bike stores have special products but you can use regular dish soap i believe. google if you can.

[@ajenmtb]

is the di2 system okay to be subjected to such wet conditions?

[@aden3113]

5:15 good grief. Blasting high pressure water inside bottom brackets and hubs will only expell the grease and cause wear. But hey, if you have spare cassettes lined up along with 20 spare bikes in case the first one brakes then blasting the bike won't probably matter.

[@themrjhable]

Oh yea you definitely should do a full clean with degreaser. I guess if you have nothing else at the moment you could just run the chain through cloth and reapply lube, but you should degrease/lube soon.

[@grebrim]

A private bike mechanic? Yeah, that would be great..

[@forceps999]

青い鎌みたいなブラシ欲しいなあｗ

[@jaklgjklwejkjfkdjsa]

+MetalSlab Whatever lube they use. Oiling the pivot points. Common derailleur service. +Will Blenkinsop He has to do 9 of them.

[@opmaatnijmegen2682]

music in a loop

[@fifajames123]

People complaining they rush wtf! They will have 18+ bikes to clean, at 9 mins each that's a long time

[@ecke70]

Well, this is a protour team that cleans like that. the bearings are not really an issue, because all bikes will be checked before each race. is there any water in the bearings they will just replace it. However for the rest of us, we might have to be a bit more careful with the high pressure washer..

[@maginext]

I rid my bike chain, cassette, and chain ring of grim with a towel drenched in gasoline, then i let it the components air dry and then i lube it with wet lube, dam does it shift so nice afterwards.

[@will009ish]

seems like hes in a rush

[@Majormalfunction001]

I was still riding my Biopace chainrings up until January of this year; didn't make me cool...

[@dbarless]

They would have to be, how else would it survive a rainy day racing?

[@LolEYEHasFun]

I practically power wash my whole bike, and lube all the bearings and chain.

[@mornayvanheerden3278]

I have one ;)

[@themrjhable]

wash all parts, rinse, then dry, then re lube your chain.

[@LolEYEHasFun]

no, every time I have a grimey cassette I take it to the manual carwash and powerwash it clean.

[@TBRben55]

to rince it faster... i guess

[@Ystadcop]

Well you can't have one..........

[@Keflynn63]

Probably because he has twenty more to go.

[@Plutomix80]

where can i find stand like that?

[@Filipmalek1]

Its a park tool bicycle stand. You can find it on www.chainreactions.com

[@Plutomix80]

Ph-runner thanks Bro

[@sidian911]

i love all the arm chair experts in the comments. what youre looking at is the culmination of decades of trial and error. save your home brew tips for your group ride buddies.

[@user-ew4hh7xq2r]

てんちょの洗車より雑で安心した

[@nightfrailer]

Wasn't the chain rings. They tried.

[@edit11]

guess more bikes to clean then just one.

[@cooldigirl26]

can u also clean my bike :D

[@livibam]

cute, but that guy, got killed of long ago....

[@JavaBoy1337]

It's easier to clean then.

[@raymondkelly3234]

How you clean and treat someone else's bike and not your own.....

[@statelypenguin]

I'm not sure that's recommended. Constantly reapplying lube without degreasing first would mean all of the abrasive dirt would still be there, which would surely shorten the life of your chain, chainrings, and cassette.

[@shuycg]

He messed up the chainrings! :)

[@conchiizquierdo2278]

.g

[@takumimatuzawa9930]

自転車って結構ハードに洗っていいんだね

[@user-lt1uk2hs1h]

欲しいman POS でも乾かさないと錆びるよ。あとこれはチームのプロのメカニックだから出来る事

[@pizzaparteners]

cleans wheel. puts in dirt.

[@tekesbur]

What is he doing at 7:25?

[@tomaskalyniuk4233]

checking the chain tension to make sure the chain doesnt fall off

[@garym8017]

Tomas Kalyniuk LOL 😂 After putting on the race oil, he's rubbing waterproof paste (like Vaseline) on the chain so the oil doesn't get washed off in case it rains during the next day's racing. You can see the tub of Morgan Blue "aqua paste" on the side before he applies it, as well as some of it on his fingers if you look carefully. As pro race bikes get washed every day, the extra build up of chain grime from using the thick paste doesn't happen.

[@folklore2]

oooooooo Kkkk

[@mmusic9194]

Same brush for brakes/pads as for chain/chainrings/mechs?? And sponge from drive train to the frame??? No go!!!

[@Beardboost]

No need to rush a bike like this, miss vital parts and the jobs not done properly? Even scratching the frame with the chain!

[@Tedroy]

Mountain Bikes look bad when they're clean. Never trust a clean mountain bike.

[@TheTetsu0730]

見ててきもちいい

[@alexhopf4469]

my bike cooler

[@Hawlkeye-e9p]

i have seen water like that sit in a rear hub for weeks whily riding daily. bad bad idea. unless you are going to break down hubs and cranks do not follow this vid. idiotic.

[@garzaorantes9543]

I have one too

[@plamenbayraktarov9704]

Is the pistol from which the mechanic is spraying some kind of unit and what kind of brand is it?