Never get tired of the raw honesty in your videos. Keep it up!!
@c.shoefish10 ай бұрын
Think we need some new blast from the past videos! The under/over are awesome as well, but let's be real, MOST ppl can't afford to even think about the new boats. Great video man.
@kevincrawford693610 ай бұрын
I'll have to say Andy, this is probably my favorite video you've done(and i watch them all). Showing maintenance issues and how to fix it helps tremendously for us do-it-yourselfers! Owning a boat is very expensive and again, it helps tremendously. Thank you for your compassion and love for the youth and military also. Hope you and your family have a safe and wonderful Chistmas and a Happy New Year!!! ❤😊
@caddyjoe779 ай бұрын
Thanks Andy and crew. More like this please. I know you said you dont have all the torque specs, but maybe a quick reference if you have the books plus experience handy? Heck we can make a pdf and put it on your site or something. Another idea is: Maybe a trailer maintenance checklist?
@salpinto44749 ай бұрын
Well after watching your message here. I checked the four bolts attaching the motor to the jack plate on my 20xp with 36 hrs. It is amazing how loose those bolts were!! Scary!
@jeffporter10010 ай бұрын
I do check these but not very often. Thanks! Will do it now!
@bryananderson99568 ай бұрын
Man its funny here in TX how little people work on there own boats, I love turning wrenches on my F250, my merc and what ever else comes undone!!! Iv learned a lot from you guys !!
@TheAmericanAngling5 ай бұрын
We've had GREAT luck with Nordlock washers for bolts like this.
@MichaelBrown-mi5jl10 ай бұрын
Thank you for this video.. i watch all of them but maintenance is so important and i appreciate it.. I'll definitely be checking my bolts before heading to the river.
@vancegordon914010 ай бұрын
Great Info-Really liked it. Thank you and have a Merry Christmas and Happy New Year
@johnnysaechao621810 ай бұрын
Merry Christmas and happy new year team marine!
@jaydoman754010 ай бұрын
Wishing you ANDY & THE ENTIRE TEAM MARINE CREW A VERY MERRY CHRISTMAS & SAFE, PROSPEROUS NEW YEAR!! SPEED, MONEY, NO BRAKES!!!!
@waynewalters581310 ай бұрын
Thanks Andy awesome info!
@acme953810 ай бұрын
Good stuff. Checked mine earlier this season and they were loose. Great reminder !
@bamadondon049510 ай бұрын
I always tell my old lady the same thing, make sure to maintain the middle too, not just the inner and the outer 😂😂😂.. y'all be careful and have a good Xmas 💪✌️👊
@Riebs7897 ай бұрын
Have you done a video on aftermarket cavitation plates? Pros/cons?
@chrishampton884210 ай бұрын
Thanks Andy and crew, Merry Christmas to all
@zacklee389910 ай бұрын
I like all the videos you guys but I really love the technical videos
@robbaize419310 ай бұрын
Thanks, leash installed last week. Didn’t check jack plate I will this weekend.
@roncunning311710 ай бұрын
Andy, Merry Christmas to you, your family and all of Team Marine!!!
@mikerice818510 ай бұрын
Awesome video Andy!
@tp227310 ай бұрын
Andy, could you go a bit more in-depth on the manual? I have a slidemaster, and the view you gave of the outside only didn't show what I needed. Should the center bolt be always tight?
@mikekennedy907510 ай бұрын
Great video. I hope you and everyone in the shop has a Merry Christmas and Happy New Year.
@Big.Nick.Thompson10 ай бұрын
wow what a great video well needed in the industry.. good job boys
@HammerDog60010 ай бұрын
Great video, you have a wealth of knowledge. Good on your for sharing it.
@tundrabasser10 ай бұрын
Good video man. I have a bit of ocd and have already done all this but a lot of guys dont think of this.
@bryananderson99568 ай бұрын
I need a nice suzki sweater like that !!!!
@JimmyBrown-u7xАй бұрын
Hey Team Marine Good Morning. I was watching one of your Atlas Jack Plate Maintenance video. I was pretty sure you said other than cleaning & lubing the slides, inspecting all the mounting hardware, an Atlas Jack Plate requires zero maintenance. I have an Atlas Micro Jacker, same with mine? Please guide me. Thank you kindly. Jimmy B.
@sha6mm10 ай бұрын
Andy why does no one install a Jack Plate on Tin Walleye Boats ? I am looking at a a 18ft with a 115=150hp motor and I never see one with a Jack plate on one for sale new. Is the performance gain not worth the cost. Great Information Andy.
@Grudzien3410 ай бұрын
Great video, we need more info like this, thanks.
@ShaneJMcNair10 ай бұрын
Like checking the air in your car tires or engine oil 🍺🎣
@Bowhunter4life10 ай бұрын
Thanks Andy for the great video . Team marine channel ROCKS! My boat is basically new 26 hours on my Suzuki . At what intervals hour wise would you recommend checking bolts for tightness ? I’m a maintenance freak . Love the channel . Merry Christmas all .
@jones13946 ай бұрын
Hello, Sir, I would like to ask you. On a manual jack plate do have to use the bar on the jack plate to tighten the bolts or can you just use a shorter bolt and go bolt to nut without a bar?
@kylevodden1910 ай бұрын
Great video I will check mine out what are the torque specs for atlas to Yamaha sho
@gustavomaciel78710 ай бұрын
Also what is a good prop. I want a good setup for my grandson high-school tournament
@o2man9810 ай бұрын
What is the best way to realigned the grease zerks on a Detwiler when they twist away from the access holes to grease? I am able to work on stuff.
@berniestewart17389 ай бұрын
Some basic PM stuff goes a long way. I have a 2005 Tahoe with over a quarter million miles.
@gustavomaciel78710 ай бұрын
Good morning. What is a good backplate for a Champion 181 DC Merc 150 xr6. I have Detwillee 8"
@BrianB_fishing10 ай бұрын
Maintenance helps maintain speed and save money; you still have no brakes. ;-)
@tomcece332510 ай бұрын
What are the torque specs for the bolts
@michaelstake744010 ай бұрын
Where’s the video of the new ranger being cut in half to show how bad it’s being made.
@chrismulch965910 ай бұрын
Did they make one ?
@codyhooser333310 ай бұрын
Let's Go Andy an Jordan
@GeraldPetersen-xn9hx9 ай бұрын
Ever thing of slowing down. Your putting a drag motor on a vw in a public place, not a race track.
@TeamMarineService9 ай бұрын
Jason’s ears perked up when you said drag motor in a vw
@blaineschwarzel244010 ай бұрын
That’s why 6 bolts are better than 4..On the engine and the boat. More is better
@russellparker923110 ай бұрын
Andy, love your videos but I find the "taking the Lords name in vein" offensive, even more so when you use it in conjunction Christmas.
@marctrottier823210 ай бұрын
you all don't need a leash if you buy a good product to begin with like suzuki or yamaha !!!!!!!!!!!!! lol mercs suck as usual !!!! happy x-mas andy to you and your family !