Team Z Motorsports Anti Roll Bar Install

[@MoremoneythansenseV4]

This is great equipment. I use all of their products for my suspension from anti RB to K member. AWESOME customer service too! Thanks Team Z

[@coledalton5581]

instablaster...

[@derickmorgan4956]

Could you bolt it in ?

[@jorginofingal4267]

How much degree the linkage must be ? I saw put a machine to see the number

[@charlesmills6169]

does welding in the top bar encourage rust after a while

[@qcklx]

This is NOT for corners. Keeps the car straight during a drag race. Do not put this on your car and carve a corner. You'll snap the end links in 2 seconds.

[@michaelpence68]

Does team z offer install of there products to customers ?

[@ahamilton878]

Can you drive on the street with this set up?

[@donbenson2099]

When you weld on a tube it bends the tube. using heat or weld is how a bent tube is straightened he just gave the car toe out which is not good (it screws up the handling) at all if he had welded it on the front side he would have given it toe in which is fine. A clamp on bracket with the tab on the top or bottom would be the best, I work in a machine shop is how I know.

[@00GrnGT]

Unfortunately this wouldn't work with my exhaust set up..🥺

[@iedhunter05]

How far forward is the roll bar from the rear end housing?

[@yolandathomas7862]

Can the roll bar be used on a street car that I use on a track sometimes on a everyday driver

[@superiorautomotive143]

Nice video thanks!

[@98snakehorse]

So you only put preload on the passenger side link?

[@davidzimmerman6723]

yes if everything is installed correctly we just use the passenger link for pre load but there are times that we do usr the driver side but rarely!

[@98snakehorse]

Great thanks David. Looking forward to installing

[@_bestie_8669]

What kind of welder you using

[@straightfromphilly4964]

Location

[@poolesperformance6146]

Please get rid of that harbor freight welding helmet..but great vid ..

[@pdiddyfx]

😂😂

[@johns9779]

Why does the guys helmet bother you? You sound like a 14yo bitch!

[@johnsmith-mv1eq]

I may have enjoyed the video IF you had shown the set up watch a good camera angle and a good video. This might as well have been taken from the street in front of this guys shop. It showed almost nothing but two guys talking. Not worth the time spent watching it.

[@jeremiahjanice4972]

john smith where can I get one of these from

[@serginietor]

reduces roll during corners, in a nutshell.

[@cturboaddict]

Reduces Body Twist on hard acceleration. You're thinking of a sway bar.

[@brentonhobson]

this looks so flimsy and pointless. I see how it works, but there are a lot of better ways of going about it

[@brentonhobson]

this looks so flimsy and pointless. I see how it works, but there are a lot of better ways of going about it