Tin Soldier Anti-Roll bar! "NAS" 4 link bolt knock offs? Great Value Mig Welding!

[@thesquirrelchroniclesakare7808]

Tin Soldiers has some really cool stuff and what a great bunch of guys ! 👍

[@momentummotorsports6137]

Your welding is nice nothing to be ashamed of there good luck this yr looking forward to seeing you back out

[@scotthall1215]

Turn the 4 link bolt in. Don't like it pointing at the sidewall of slick. And fuel line needs to go over anti roll bar. I'm picky 😅

[@johnparker6642]

Nothing wrong with being picky brother

[@Levisbackyardperformance]

It can save someone’s car or life too

[@russellridge8623]

It is what it is has pretty well run its course.

[@richwood8650]

Great job showing progress and explaining why!!

[@robertdouglas3456]

Those Tig welds look pretty classy TJohn!🤩🤩

[@thomassanders6679]

Keep turning on it John, be safe

[@jamesroberts807]

MASTER WELDER at it again lol. Great job, Built no bought!!! GO TJ GO

[@buiItnotbought]

If you grind off the mil scale further on the 4130 it'll weld cleaner and more consistent

[@PaulRhodes420]

Doing my part...commenting, liked &subscribed! Now do your part, fix, tune & *WIN!* Come on TurboJohn! You have a Ford, First On Race Day!! I'm a Chevy man, but I understand!😂

[@ldnwholesale8552]

John,, get those shocks out near the wheel. The most important part of the rear suspension is near the middle of the car and are next to useless out there. That will make the car more stable. Also ideally make a wider diff housing and then use wheels about 25-30P. All that axle flex will also rear steer it. And far less roll steer. Those Ginormous rear 'sway bars' simply bind both wheels together. 3/4 or max 7/8 bar will allow the suspension to flex and work

[@Headsup9550]

I'm pretty sure that a diagonal will work against the wishbone. I know that they'll work against a panhard but I don't think you're supposed to run two locators..

[@ironmike742]

I would drill the bushing housings and install grease fittings to help with the wear. Probably would extend the life of the bushings and keep things working alot smoother.

[@PgUpPerformance]

I just replaced all my ARB bolts with NAS from aircraft spruce, they were pretty reasonable...I was chasing ARB adjustments last season and found that all the threads were pounded flat.

[@mre1984]

Keep picking at it John. Liked the video!

[@supercharged6771]

I also use the longer bolts for the longer shoulder length, and currently i have the "×" style centering brace, it gets in the way of the driveline and will bind when you make a bar change as the angles are different, is good for dragster stuff or fixed suspension, I'm switching to a Tim Mcamis quality wishbone

[@jamesroberts807]

Sure am glad the intro music is not broken this time 😅😊lol 😂. GETTER DONE TJ

[@melissamcallister2867]

I am also a 4 link car owner and I am wondering why are you always doing bar adjustments at the track especially with those qa1 mod shocks with 121 settings either the car suspension is pushing the car or lifting the front of the car just wondering

[@raymondguzman1907]

Is that 2x3 boxed in?

[@jamesroberts807]

The shoulder of the bolt is stronger than the threads, HI HP applications TJ 😅😊

[@Headsup9550]

Why is that funny? It's a known fact that the threads fold and the shoulder doesn't..

[@Amxracer]

Cool 😎 . Let’s go !

[@oldscutlass406]

Tractor Supply cheapest place to buy bolts

[@paulalabab8896]

John, your car needs the nas bolts and us made rod ends. You go too fast for hardware store junk. 😮

[@Frankie--da-fixer]

I think that wing is way to high,you ever see a car in a wind tunnel,Air go over the car and down the back and out,I think it would work better if it were half the hight you have it as:-)

[@robholmes2129]

He has it high to be in the "clean air" which is less turbulent than what goes over and down the back of the car but probably doesn't matter when the wheels are up in the air lol

[@bobgreene5460]

​@@edwardrosinski5639 TJ runs almost as fast as Formula 1, they all got wings.

[@jkfonyi]

@@edwardrosinski5639 several back of the track cars have a high wing . I’m pretty sure he didn’t ask you to drive the car so not sure why it matters to you .

[@toddclark332]

❤, 😁👍🇱🇷

[@MartinMcMartin]

QA1 has gone to China 😕

[@BillyP-49Chevy]

Sorry the way they acted on television no prep racing, Tin Soldier will have zero respect in the New England area. Literally to go ahead and brag how bad your car is when you get half a track lead, is just absolutely ridiculous. Poor way to represent. yourself